Complete a natural all-wood look for drawers with a modern design that gives you access to drawer contents without metal hardware. These attractive Danish-made pulls are sanded and ready to finish. Installation requires the following mortise: 3-3/32" (W) x 1-1/16" (H) x 13/32" (D).
- 3-1/4" overall length
- 2-11/16" inside length
- Installation requires the following mortise: 3-3/32" (W) x 1-1/16" (H) x 13/32" (D)
- 9/32" projection
Customer Reviews5 Review(s)
This is a very nicely designed...Posted January 31, 2013
This is a very nicely designed hardwood pull sanded and ready to be installed/finished. However, the regular price is pretty steep but on sale, snap a few up to have on hand. I wouldn't say these pulls are easy to install. The mortise is not at all rectangular...it is more elliptical and therefore it is almost necessary to use a trim/laminate/small router and a small bit to finesse the fit. I did hog out most of the mortise with my drill press and various Forstner bits. I bought 3 pulls and only one had its tenon rounded over thus making tracing it onto the drawer front difficult. Take a photocopy or two of the back of the pull for a template. AFTER you have traced it or used the photocopied template, I would suggest sanding the tenon edges to make insertion a bit easier. Use some double-sided tape to stick it to the drawer front for tracing...makes it a lot easier to get a clean trace.
I've ordered a number of the...Posted October 19, 2008
I've ordered a number of the maple and walnut pulls. They are nicely made, pre-sanded to finish quality, and are perfectly matched to each other. You can even mix and match woods if you are doing a contrasting-wood project.These are a decent purchase as the sale price. At full price I wouldn't even look twice. My only complaint is that the back side of the pull has a sticker on it, which requires some time (not too much) to remove the adhesive goop to have a clean gluing surface.
They were ship every fast and...Posted May 11, 2008
They were ship every fast and went in every easy. And they made my night stands look great.
I used two maple pulls on...Posted March 21, 2008
I used two maple pulls on a decorative wooden tray. One of the two pulls was shaped from a piece of maple that featured a big knot, but that did not present a problem for my application.The pulls were delivered promptly and met my expectations. I felt that they were reasonably priced at the [sale price]; at the full price I would not have bought them.
These drawer pulls were easy to...Posted March 10, 2008
These drawer pulls were easy to install and really made a simple file cabinet look professional.