Spare Blade for Bench Dog® Tools No. 4 and No. 5 Planes
This blade is a direct replacement for the one included with your Bench Dog® Tools No. 4 Smoothing Plane (#58837, and also the older model) and No. 5 Jack Plane (#59102). Having a spare iron on hand ensures you'll always have a sharp edge to deal with challenging grain, and you can also purchase multiple blades and grind each to a different bevel angle to suit a range of applications. The blade is made from 1/8'' thick hardened carbon steel for reduced chatter and excellent planing characteristics.
- Fits the Bench Dog No. 4 Smoothing Plane and No. 5 Jack Plane (#58837 and #59102, sold separately)
- 1/8" thick carbon steel for chatter-free performance
- May require honing
|Manufacturer Part Number||250054|
|Type||Hand Plane Accessories|
1 year ago
over 2 years ago
10 months ago
The stock blades are thinner, so you might have a bit of trouble with how long the threads are on the screw that attaches your chip breaker. Most of these screws were made just barely long enough to do the job, so swapping your stock blade for a thicker model might mean that the screw is left holding on by just one thread. In this case, you might look for an upgrade for your chip breaker, or just simply be careful how tight you torque the screw down, so it doesn't get stripped.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.