$19.99 Each
In stock
A set of replacement hose ports for the ones included with the Dust Right® Universal Small Port Hose Kit (#48212, sold separately).

Replacement Hose Ports for Dust Right® Universal Small Port Hose Kit

Item #
53193
Rating:
90% of 100

These two hose ports are direct replacements for the ones that ship standard with the Dust Right® Universal Small Port Hose Kit (#48212, sold separately). In the event that yours get lost or damaged, these are available to ensure that any dust collection downtime is minimized. Includes two sizes of flexible rubber hose ports—1'' and 1-1/2'' ID—that flex to fit on almost any tool. Thoughtfully designed with a slight elbow that helps lift the dust hose off of your work.


Features:
  • Ports flex to fit almost any handheld power tool with dust collection compatibility
  • Swiveling ends for free range of motion
  • Ports reverse thread into hose for a secure, leak-free connection
(1) 1'' ID Swiveling Rubber Hose Port
(1) 1-1/2'' ID Swiveling Rubber Hose Port
More Information
Brand No
Manufacturer Part Number No
Weight 0.3500
Tech Spec No
Tech Docs No
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
4.5 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
1
0
0
Festool Adapters for a Shop Vac
I bought these to fit my Festool TS 75 track saw and my Domino DF 500. They work perfectly. The 1.5” fits the larger track saw and the smaller 1” fits the domino. A 1.25” Shop Vac hose fits snuggly into one end and the flex end attached to the tool. This is what you need to run your Festool Products with a Shop Vac!
DF 500
TS 75
August 6, 2018
Purchased
5 months ago
Woodworking Experience:
Advanced
Works fine as expected
Works fine as expected!
May 18, 2018
Purchased
4 months ago
Woodworking Experience:
Intermediate
These are one of the best things a person can have in the shop. for dust collection. example power sanding. DF.
December 19, 2017
Purchased
11 months ago
Works great when not broken!
These are great but my original one broke after about a year. That is why I bought this replacement. The break was on the inside of the black plastic connector to the hose that allows it to rotate. Other than that, these are great for attachment to initial sander or belt sander. Tight enough to keep the dust in.
January 2, 2018
Purchased
9 months ago
Woodworking Experience:
Advanced
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 21 answers
Why did you choose this?
Rockler Store
Need extras
Schuyler K on Jul 30, 2018
I need an extra port.
Ronald H on Jun 21, 2018
Need extras
Schuyler K on Jul 30, 2018
Needed for sanders.
Richard D on Jul 16, 2018
I need an extra port.
Ronald H on Jun 21, 2018
original hose ports are worn
William H on Jun 4, 2018
to attach hand tools to shop vac
Randall K on Apr 22, 2018
Sam as above.
Bob R on Apr 12, 2018
I need a variety of connections for various tools and I am trying to hook each tool individually so I don't have to hook and unhook the hoses. I have purchased other similar products from you and they have all made a big improvement in my shop. Thank You Rodney H.
Joyce A on Mar 21, 2018
Redoing my shop want to control dust.
EARL H on Dec 29, 2017
The flexible pipe and size.
Todd L on May 24, 2017
One of my originals is broken.
JAMES S on Apr 12, 2017
Replace - broken part
Sanford E on Feb 7, 2017
I have a second power tool with a dust port and I wanted a second connector. I would like to be able to buy only the size I need and not both since the 1" will just sit on my bench
Jim W on Jan 31, 2017
connect my small port units to the system
SIDNEY L on Jan 16, 2017
for the miter saw and palm sander
David Y on Jan 2, 2017
Needed for sanders.
Richard D on Jul 16, 2018
original hose ports are worn
William H on Jun 4, 2018
Hi I need to plugin my Bosch dust extractors to my AEG orbital sander. Both have an outside diameter of 35 mm. Will the small port hose kit help me achieve this?
Marc M on Aug 21, 2017
BEST ANSWER: My Vacuum line has a ID of 38mm and fits over the screw end (black) of both ports snugly but not tight.You will not fit a 35mm OD inside the screw end of the port. It is possible that you may be able to put the dust extractor line on the out side of the screw end of the port. My Makita Trak Saw has a 40mm OD dust port where i use the larger (blue) port adapter. My Bosch Orbital Sander has a 30mm OD dust port where I use the smaller (blue end) port adapter. On both of these applications I use hose clamps on the blue end to secure the fitting. I not sure this product will hook into your extractor line with out an adapter.The smaller port should work with your sander.
Great but what about the other end? I need two 2 1/4" ends to connect hose to router and vac.
Tim D on Jan 20, 2017
BEST ANSWER: These are for use with the full small port kit which includes the narrow hose, the 2 1/4" adapter and both of these. If you have several tools with small ports, this replacement port kit allows you to switch the hose from tool to tool and leave these adapters in place on the tools. You may also extend your set-up with the Auxiliary Small Port Hose.
Auxiliary Small Port Hose
Auxiliary Small Port Hose
Dust Right® Universal Small Port Hose Kit with Auxiliary Hose
Dust Right® Universal Small Port Hose Kit with Auxiliary Hose
Can these only be used with the DustRight Universal kit, or can they be used with any other standard-sized hose? It looks like the kit hose may be a non-standard size (2"?). Thanks.
Dan S on Nov 30, 2017
BEST ANSWER: I can't say that they could be used with all standard sized hoses, but they should work with most 1.25" hoses. The ID of the black end is 1.225", the max OD (ridge) is 1.532"and the min OD (valley) is 1.327" The ID of the blue end is 0.999" but is somewhat flexible so could expand slightly beyond that.