$29.99 Each
In stock

Rockler 24-inch Shop Stand Apron

Item #
45095
Rating:
96% of 100
Rockler 24-inch Shop Stand Apron Rockler 24-inch Shop Stand Apron Rockler 24-inch Shop Stand Apron
Rockler 24-inch Shop Stand Apron
Keep your tools in full view and within easy reach with the Rockler 24'' Shop Stand Apron. With a whopping 40 pockets of various sizes, you'll have room for your key tools at any given workstation, plus plenty more. The tool organizer features pre-installed grommets for easy attachment to the 24'' side of any Rockler Shop Stand (#48089, sold separately), or to the wall. If you have casters on your stand, you can freely move it around without worrying about items falling out. The pockets will keep everything neatly in place. Made of durable polyester weave with a backer board inserted for rigidity.

Features:

  • The 24-inch Shop Stand Apron is made out of a durable polyester weave
  • Four steel attachment grommets in the corners enable easy mounting to your bench, Rockler Shop Stand (#48089, sold separately), or the wall
  • Backer board inserted for rigidity
(1) 24-inch Shop Stand Apron
More Information
Brand Rockler
Weight 2.0500
Tech Spec Pocket sizes are as follows:
  • (10) 4.5'' W x 5-1/2'' H large pouches.
  • (10) 2'' W x 4-1/2'' H narrow pouches
  • (8) 2-1/4'' W x 4-3/4'' H slots.
  • (1) 4-1/2'' W x 4-3/4'' H slot
  • (3) 4-1/2'' W x 2-3/4'' H flat pocket (slot)
  • (8) 1'' W x 2-3/4'' H narrow pouches

  • Measures 24'' W x 29-1/4'' H overall
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

4.8 / 5.0
12 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
10
1
1
0
0
The apron solves some storage problems and I strongly recommend it.
May 28, 2019
Purchased
1 month ago
Woodworking Experience:
Advanced
Great & handy
They’re great. I have 3 of them. I attach them to the back of my lathes to hold lathe tools that I use frequently. Catches some shavings but when I vacuum I make sure to do it too. Tools are too heavy to get sucked up in vacuum
April 12, 2019
Purchased
3 months ago
Woodworking Experience:
Intermediate
Glad I don't rely on first impressions
My first impressions of this were frankly not good. I thought it looked kind of cheesy and even planned to build a door to put over it (I screwed it to the wall next to my workbench. I also thought that it would start sagging after a while.

I'm glad I don't rely on first impressions. I've used it several months now. It does a good job holding the tools I use most. They're readily accessible and easy to find. It turned out to be sturdy and hasn't sagged a bit. Once I got used to looking at it on the wall it feels like it's always been there.
October 11, 2018
Purchased
12 months ago
Woodworking Experience:
Intermediate
Ideal tool organizer for all my shops
Love this Shop Apron. I have a large property with workshops for wood working, cycling, and garden & misc. The workshops have peg boards that look great but the tools get stuck on the pegs and then pegs and tools come flying off when pulling tools off. I put up the 18" version of this shop apron in my bike shop next to the bike stand and all of my toots are now easily identified, within easy reach, and I can fit more tools into a smaller space than with peg boards. I got another 24" apron for the wood shop and plan on buying several more. Not even using the stand - I just put in a couple of screws on the wall where I want it and hang it up.
December 25, 2016
Woodworking Experience:
Intermediate
This is great for organizing most of my table saw tools and than some. love the smaller pockets for smaller tools.nice job
December 18, 2016
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
Very useful addition to the shop stand.
April 10, 2016
Purchased
over 3 years ago
great apron
fits lots of tools
February 12, 2016
Purchased
over 4 years ago
Woodworking Experience:
Advanced
tool pouch for tool cart
I bought this apron for my tool cart on wheels, and I move the cart where ever I'm working in my shop, It is working out great.
I hung it on the edge of the cart so the tools I use most are right there.
February 9, 2016
Purchased
over 3 years ago
Woodworking Experience:
Intermediate
Rockler 24-inch Shop Stand Apron
Hung it on the front door of a tool cabinet. Very handy.
October 25, 2015
Purchased
over 3 years ago
Woodworking Experience:
Intermediate
Very handy helper
I have a mobile shop table on wheels (built with Rockler shop stand legs, stretchers and locking casters) and found it annoying to have to work around small tools, etc, sitting on the table top. This apron solves the problem.

I have more traditional stationary storage options but I found myself constantly taking small items to the table to use them and then they were in the way unless I took them back to store away again. Not efficient if I know I will, or even might, want something again soon. After installing this apron I could temporarily store small items, completely out of the way, leaving my work surface clear. Yay!

Now that I've been using it for a while I find myself leaving some things stored nearly always at the table rather than where I'd originally kept them.

It was easy to install but keep in mind the mounting holes are located for use with Rockler shop table legs. If you want to use it on something else you'll be fine as long as you can drill to match the spacing of the grommets. The backer board is a plus as heavier items don't cause the apron sag.

I haven't had any trouble with wear yet. Haven't been using it long but it seems to be well constructed so I don't expect problems.

One of my favorite Rockler items. Well done!
May 9, 2015
Woodworking Experience:
Intermediate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 31 answers
Why did you choose this?
Rockler Store
More organization.
Ray S on May 7, 2019
I hang them on the back doors of my van and put my hand tools in them.
Harold O on Jan 21, 2019
More organization.
Ray S on May 7, 2019
This is great for small tools that are used in my shop frequently. It helps me keep my workbench clear and also cuts way down on the time needed to find a tool.
Devon F on Apr 24, 2019
I hang them on the back doors of my van and put my hand tools in them.
Harold O on Jan 21, 2019
helps keep workbench tools handy
RD B on Aug 17, 2018
Easy tool storage that can go anywhere you you can a screw
Nick L on Apr 26, 2018
help with organization of work space
Peggy H on Dec 20, 2017
More organized
Larry C on Apr 17, 2017
To see if it is useful
Keith B on Feb 20, 2017
Organize shop
Cherie N on Jan 25, 2017
Storage
Damon W on Dec 27, 2016
I recently built the Ultimate Shop cart as demonstrated by Stumpy Nubs. I bought the T track table and this side apron to go on the cart. I think i need another one but we will see.
Earl P on Oct 31, 2016
Fits my kreg table sides with lots of quick, handy storage.
Dennis B on Oct 21, 2016
I have limited storage space for my shop. This hangs right at the end of my table saws extension table and is very handy.
Morgan S on Aug 19, 2016
good
Enrique G on Jul 20, 2016
To provide a way to have oft-used tools close to the workbench.
Robert L on Jan 24, 2016
Great way to organize stuff and still be able to see it, grab it and use it!
Charles R on Jan 17, 2016
Convenient & handy organization during a project
Taliba Holliday N on Sep 24, 2015
Great idea to organize by installing at the end of a work bench.
Bob on Aug 17, 2015
I have build a multi purpose work station and this holder will fit nicely to hold miscellaneous tools and supplies.
Stanley J on Aug 2, 2015
To quickly move my selected hand tools from workshop to van to customers' homes in one transition.
Richard D on Jul 24, 2015
Get organized!
Marvin M on Jul 13, 2015
to store my tools works great
Leonard R on Jul 10, 2015
Needed to organize my tools
Thomas B on Jun 19, 2015
provides at hand storage and is not available from Australian source
Geoffrey D on Jun 18, 2015
MOUNT ON END OF SHOP WORK BENCH
allen l on Jun 18, 2015
Setting up new workshop
Francis C on Jun 18, 2015
convenience
john b on May 22, 2015
for a relative maybe they'll learn to keep tools in the right place. or i should say God willing and the creek wont rise.
john f on May 18, 2015
Tool storage for my table
Dennis P on Apr 18, 2015
It looks like a solution to my problem
Horndoggie on Apr 17, 2015
This is great for small tools that are used in my shop frequently. It helps me keep my workbench clear and also cuts way down on the time needed to find a tool.
Devon F on Apr 24, 2019
helps keep workbench tools handy
RD B on Aug 17, 2018
Why are the grommets offset on the Rockler 24-inch and the 18-inch Shop Stand Apron?
Gary M on Feb 2, 2019
BEST ANSWER: They are offset to accommodate the bolt pattern on the Shop Stand. If they were symmetrical, it would be crooked on the stand. As a stand alone piece, you can just adjust the screw placement.
More Suggestions