Store Locator

Get Expert Advice

Return Policy

Rockler CNC Table

With its spacious top, and included controller storage, this table serves nicely as mission control for all things CNC.
Item #
47740
Rating:
96% of 100

At 28" x 40", it's large enough to accommodate any CNC Shark, as well as most other consumer CNC routers. Your controller hangs conveniently below the table in a saddle-shaped bracket, and is easy to access for emergency shut-downs. With its sturdy steel stand as a foundation, you'll get rock-solid stability, and plenty of storage potential, and the included leveling feet ensure that your router bed stays flat for precise results.


Steel Stand Features:
  • All legs and stretchers are pre-drilled to easily add sides, bottom and hinged doors for a built-in cabinet, and have square holes for easy assembly with carriage bolts
  • Legs are heavy-duty 1/8" steel to support any shop application
  • Includes 4"x 1/2" heavy-duty adjustable levelers for various height settings
  • Includes four 32" legs and all mounting hardware (carriage bolts and nuts)
  • Top stretchers can be mounted flush with top or 4" down to add drawer or woodworking vice
  • All parts coated with durable black sand paint
  • Optional casters can be mounted in place of the adjustable feet (#47034, sold separately)

CNC Controller Bracket Features:
  • Compatible with controllers for CNC Shark routers
  • Inside width of CNC Controller Bracket is 11-3/4"
  • Inside height is 5-1/2", which leaves space for the controller to hang below the top stretcher
  • Sturdy steel construction
(1) Rockler CNC Table Top (45996)
(1) CNC Controller Bracket (49540)
(1) Rockler 24" x 36" Shop Stand (48089)
(1) Assembly Hardware Pack
More Information
Brand Rockler
Weight 78.0000
Tech Spec
  • Table Top Measures: 28" x 40"
  • Table Top Material: 1-1/8" thick Melamine-Coated MDF with 3mm Black Edge Banding
  • Steel Stand Base Measures: 24"W x 36"L x 3"H
4.8 / 5.0
9 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
8
0
1
0
0
CNC Table
Great table for my Shark HD4, was able to mount both the controller and the spindle controller to the deck and added the pendant stand as well. This makes a nice movable table when I added the casters. Below I added another shelf where I was able to keep the water reservoir and my other accessories associated to my CNC
Complete movable CNC unit on Rockler CNC Table
Complete movable CNC unit on Rockler CNC Table
April 7, 2020
Purchased
2 months ago
Woodworking Experience:
Intermediate
Sturdy and easily assembled
January 19, 2020
Purchased
5 months ago
Woodworking Experience:
Intermediate
Great table
Great table. Nice and heavy
December 22, 2019
Purchased
6 months ago
Woodworking Experience:
Advanced
CNC Work table
Great quality
June 10, 2018
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
Stable Table
Bought table to mount the CNC I bought. Table is very sturdy and was easy to assemble.
March 18, 2017
Purchased
over 3 years ago
Woodworking Experience:
Advanced
CNC table with conversion of spindle to shark hd
The CNC table from Rockler works well and fits my shark perfectly. Also modified the router to the water coole spindle, which caused a dilemma as to the reservoir. Suggested is a 5 gallon bucket, however an acrylic aquarium seems to fit the bill quite nicely. The use of an auxiliary 18"x 60" table along the back not only holds the reservoir but holds the computer and other controls quite nicely.
User submitted image
Added Apr 21, 2016
April 21, 2016
Purchased
over 4 years ago
Woodworking Experience:
Intermediate
CNC Table
A must item for CNC. and routers. Sturdy and has enough room for CNC piranha and router table
May 20, 2015
Purchased
over 5 years ago
Woodworking Experience:
Intermediate
good table
Fits my Shark Pro HD3 well
April 27, 2015
Purchased
over 5 years ago
Woodworking Experience:
Advanced
Solid but a pain to assemble
Overall this is working out really well for me. But assembly was frustrating, particularly because they have you positioning the controller shelf after everything else is assembled. It is hard to know where the supports need to go before placing the CNC on it. Once you've done that, though, marking, drilling and attaching the supports involves twisting that makes plumbing under a bathroom sink seem comfortable. I'd much rather have an adjustable drawer that I could mount early in assembly and then adjust as needed to fit my controller.
May 13, 2020
Purchased
1 month ago
Woodworking Experience:
Intermediate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 6 answers
Why did you choose this?
Rockler Store
Goes with the CNC
Linda O on Oct 22, 2019
I needed a good stand for my Stepcraft D840 CNC , #3D printer, I will be building and adding a 5 Drawer ply wood case to the inside of the stand for storage.
Rick D on Apr 21, 2019
Goes with the CNC
Linda O on Oct 22, 2019
For my Shark 2
Scott M on Jun 28, 2019
I needed a good stand for my Stepcraft D840 CNC , #3D printer, I will be building and adding a 5 Drawer ply wood case to the inside of the stand for storage.
Rick D on Apr 21, 2019
To go under my new Shark II CNC machine.
Joey L on Dec 5, 2018
Hoping it will match well with the HD4 CNC I also purchased.
kenny v on Jun 2, 2017
Used to sit the Shark HD CNC upon. Works great. Does require tightening the nuts to the frame bolts occasionally.
Gregory L on Feb 9, 2017
I will buying a shark router soon.
Douglas S on Mar 10, 2016
To but the Cnc machine on..
Jeff B on Feb 25, 2016
right size and price
F E S on Feb 20, 2016
This is what I used for my cnc shark hd3 w/extended bed but I had to buy the 60" extenders
Danny W on Dec 17, 2015
wanted it
Robert O on Nov 1, 2015
perfect for a general work table to match the height of my t-track and router tables
Michael S on Apr 21, 2015
TO USE AS A TEMPORARY OUT FEED TABLE FOR MY TABLESAW
Robert F on Apr 18, 2015
for CNC machine
waltfr on Apr 12, 2015
For my Shark 2
Scott M on Jun 28, 2019
To go under my new Shark II CNC machine.
Joey L on Dec 5, 2018
will this table work with the shark HD4 extended bed H2O cooled unit ?
steve k on Jul 10, 2017
BEST ANSWER: This stand would not be a good choice for the HD4 Extended. The CNC Shark Extended Bed is 63" long and this stand is only 36" long.
How are you supposed to attach the table top to the stand? It didn't come with any hardware for that and it doesn't have any holes in the table top to attach it to the steel stand.
Rick on Jan 9, 2020
BEST ANSWER: Flip the table upside down and center the legs on the table top. You can use any screw, but you should pre-drill the holes. I used a relatively fine pitch self drilling screw with a large head - which worked well with the press board top.
Can I buy replacement feet for this table?
Michael L on Mar 7, 2020
BEST ANSWER: don;t see why not I put casters on mine
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov