Rockler Convertible Benchtop Router Table
Quickly pull out the router for freehand use—base converts easily from benchtop mode to wall-mount mode.
Item #
BDL7893
As low as $219.99
In stock
- Required Insert Plate Kit is sold separately. Insert Plate Kits are available: one for compact routers (#53910), for mid-sized routers (#55512) and for the Triton spindle sander (#53061).
The folding base on our Convertible Benchtop Router Table can be quickly reconfigured for benchtop use, wall-mounted use, or folded up for storage or transport. In addition, the unique router plate (sold separately) lets you quickly remove the router for freehand use, then dock it again for table use—the compact size of the plate makes it light and nimble in freehand applications. Compact and portable, yet full-featured, the table is ideal for small shops and jobsite use. Triangulate the base and mount it to the wall of your shop or to stud walls on the jobsite. Use it on your benchtop or on the tailgate of your truck, then fold it and tuck it under the bench or into the truck cab.
Features:
- Four modes in one table: benchtop, wall-mount, freehand routing and storage/transport
- Base converts quickly from freestanding to wall-mounted—quick-release pins lock the legs in place
- In wall-mount mode, the router can be removed and the top folded flat against the wall when not needed
- Large non-slip feet clip into the base framing for rigidity in the various configurations
- Pull out the router with plate (sold separately, see below) for freehand use; dock it in the table for table use
- Keyed mounting holes are 16'' on center for easy wall-mounting
- 3/4'' miter track accepts most standard miter gauges
- Accessory slot in fence accepts featherboards and stops
- Tall ergonomic fence knobs for fast fence adjustments without skinning your knuckles
Will my router fit? The Rockler Convertible Router Table will accept most compact and mid-sized routers. It will NOT accept plunge routers or large routers like the 3-1/4HP Porter-Cable. It will also NOT accept the Porter-Cable PCE6430 Laminate Trim Router, due to its unique base design.
55512 is pre-drilled for many common routers, and can be drilled for other routers.
Pre-Drilled for the Following Mid-Size Routers:
- Bosch 1617
- Dewalt DW616
- Dewalt DW618 series
- Hitachi M12VC (not M12V)
- Makita 1100 series
- Porter-Cable 100
- Porter-Cable 690
- Porter-Cable 890 series
53910 is pre-drilled for many common routers, and can be drilled for other routers.
Pre-Drilled for the Following Compact Routers:
- Porter Cable, Bosch and DeWalt Fixed-Base Compact Routers
- Porter-Cable 7301, PCE6435 and 450
- Bosch Colt
- DeWalt 611
- Dewalt D26204K
(1) Router Table Top
(1) Fence with MDF sub-faces
(1) Convertible metal base
(1) Bit guard
(1) 2-1/2'' dust port
(1) Fence with MDF sub-faces
(1) Convertible metal base
(1) Bit guard
(1) 2-1/2'' dust port
| Brand | Rockler |
|---|---|
| Tech Spec |
|
- Rockler Convertible Benchtop Router Table Instructions
- Convertible Benchtop Router Table Baseplate for Compact Routers Instructions
- Mid-Size Router Insert Plate Kit for Convertible Benchtop Router Table Instructions
- Router Plate Drill Guide for Rockler Router Jigs
- Instructions for installing the Convertible Benchtop Router Table Baseplate For Triton Oscillating Spindle Sander
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.govWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood. 
