Store Locator
Special Price $19.99 Each $29.99 Each
In stock

Get Expert Advice

Return Policy

Rockler Double Featherboard

Add stability and control when routing taller pieces on your router table.
Item #
90% of 100

Apply pressure at table-level AND the top of your fence - ideal when routing workpieces on edge. Super stable, with unique expandable miter track bars. For use with table saws, router tables, drill presses or any tool with a standard miter slot. Ideal for use with any tool that has a standard 3/8" x 3/4" miter slot. Expandable miter track bars provide maximum holding power. Perfect for getting clean cuts on raised panels.

  • Two easy-to-grip locking knobs that safely position featherboard in place.
  • Unique, expandable miter track bars provide maximum holding power.
  • Snug hold allows for safer, cleaner cuts when ripping, routing and drilling.
(2) Featherboards
(2) Knobs
(2) Risers
More Information
Brand Rockler
Weight 1.5500
Discountable Yes
4.5 / 5.0
64 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Best Featherboard Available
Excellent design and functionality compared to the competition. Must have for safety reasons when re-sawing on your table saw.
February 12, 2020
4 months ago
Woodworking Experience:
Just get em. You need them.
These feather boards are the cats meow. They hold your work piece tight against the rip fence while your fingers stay safely away from the blade. That’s exactly what I’ve been looking for.
February 9, 2020
1 month ago
Woodworking Experience:
Rocker Double Featherboard
Works great!!
January 27, 2020
1 month ago
Woodworking Experience:
It was the right height for the fence on my router table to cut the 45 degree interlocking mitre joints to make the Luminary
December 5, 2019
3 months ago
Woodworking Experience:
Double feather board
I use this with my table saw holding the materials at a point before and after the saw blade. This allows me more control when pushing materials through the saw.
October 22, 2019
over 3 years ago
Woodworking Experience:
double featherboard
This product works well either as a single or double.
October 3, 2019
5 months ago
Woodworking Experience:
Great. Works wonders.
August 28, 2019
6 months ago
Woodworking Experience:
Worth buying
It works great for ripping tall boards. Give solid and even pressure against fence.
May 17, 2019
over 2 years ago
Woodworking Experience:
Good for resawing.
It does a great job of holding the wood flat against the fence when resawing.
March 16, 2019
12 months ago
Woodworking Experience:
Very convenient and easy to use.
March 13, 2019
1 year ago
Woodworking Experience:
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 8 questions Browse 8 questions and 68 answers
Why did you choose this?
Rockler Store
Eric G on Feb 20, 2020
Good deal on this versatile featherboard.
Tatiana L on Feb 15, 2020
Eric G on Feb 20, 2020
To use on a jet shaper to run stock.
william c on Feb 17, 2020
Good deal on this versatile featherboard.
Tatiana L on Feb 15, 2020
To hold boards vertically on my table saw for resawing.
Steve L on Feb 10, 2020
Looked like a great deal. I had the single feather board and due to a mishap I destroyed it and need to replace it
Alan R on Feb 9, 2020
I want to try these feather boards on my table saw.
Donald C on Feb 3, 2020
Table saw ate my other ones
MICHAEL G on Jan 8, 2020
safer vertical routing
DAVE O on Dec 14, 2019
On my son's wish list.
Donna K on Dec 12, 2019
Safety concern
Walter G on Oct 8, 2019
Making crown moldings and need to keep the work close and tight.
SCOTT N on Sep 28, 2019
Better than the DIY wood ones for sure
David F on Sep 5, 2019
Saw a review on Stumpy Nubs and realized that this was an excellent replacement for my makeshift solution!!!!
Ray G on Apr 28, 2019
Added safety routing a piece vertical using a lock miter bit.
Joshua M on Feb 22, 2019
Needed and on sale
Cheryl F on Feb 22, 2019
Boards of a feather flock together.
John O on Feb 18, 2019
It is a very good price.
Mike on Feb 17, 2019
Brand name - adaptability to stock size.
JOHN S. on Feb 17, 2019
Will act better as a pair to hold wood properly
DAN G on Feb 14, 2019
I already have one, but oflten times I’m in need of another
M N on Feb 13, 2019
needed it for a job
Jerry F on Feb 13, 2019
Upgrade from shop made feather board.
Gary B on Feb 11, 2019
Needed for my Delta shaper
John H on Feb 10, 2019
I already have a Rockler featherboard and it’s better than Woodpeckers, so I’m buying more.
Marty C on Feb 6, 2019
Great price
Scott H on Feb 6, 2019
Only place I've found to get this!
David E on Feb 1, 2019
Because I want to make Raised Panels for my closet door. I can stack and reverse the feathers as needed.
David S on Dec 1, 2018
This stackable featherboard will make using my router table a lot safer. I bought two sets, one for the incoming side and one for the outgoing side. When doubled up they will hold the lumber against the fence while the lumber is in the vertical position.
Gerald F on Nov 10, 2018
Look like just the thing I need
John S on Oct 31, 2018
Chose this because of the good reviews I read. Hope it's as good as people say it is.
Guy Peterson O on Sep 23, 2018
most economical option.
Michael L on Sep 4, 2018
I wanted two for added support on longer work pieces.
william earl p on Jun 30, 2018
Safety and Quality
Brad M on May 29, 2018
Student Safety
Paul T on May 19, 2018
Keep the wood aligned with the fence on my home built router table
Mark K on Apr 15, 2018
Doug R on Apr 15, 2018
Just tried one standing tall wood on edge through table saw and it worked great. Need one for myself.
Ronald P on Mar 28, 2018
I chose this item because Woodsmith Magazine ran an article about feather boards and specifically mentioned the usefulness of a double feather board. Also because i need to upgrade may table saw safety gear.
Robert G on Mar 18, 2018
A have for the shop.
JOEL V on Mar 18, 2018
needed it for use on my router table in handling wood on edge higher than the fence
James T on Mar 14, 2018
needed it
James K on Feb 17, 2018
Needed a good feather board that will be repositioned frequently and am trusting the Rockler name to provide a quality product
Ken D on Feb 12, 2018
For better control & finish on routing table
Lawrence J on Feb 3, 2018
Larry on Jan 26, 2018
accessories for my new router table top.
Thomas N on Jan 7, 2018
Replace shop built ones.
Charles L on Dec 28, 2017
Better result, less waste
YU T on Dec 24, 2017
Father wants for Christmas
Debbie C on Dec 3, 2017
appears to be a good value and i can use with my router table or table saw
Paul S on Nov 12, 2017
needed extra support for taller wood
Edgar L on Sep 27, 2017
To use on a jet shaper to run stock.
william c on Feb 17, 2020
To hold boards vertically on my table saw for resawing.
Steve L on Feb 10, 2020
I bought this a while ago for my husband's portable router table. The slot on his table is 5/8", instead of 3/4". Is there a set of 5/8" slotbars for this system? Any suggestions?
Sarah on Mar 18, 2019
Would this work with a DeWalt table saw? I purchased the saw about a year ago.
Mark L on Mar 1, 2016
BEST ANSWER: Yes, use it regularly
Has anyone ever gone higher than two? I resaw boards as high as 12" and would love a bit more pressure near the top.???
Bret R on Aug 1, 2019
BEST ANSWER: I wouldn't recommend going 3 high the feather boards would not create enough pressure at the top. You might want to try microjigs 3D push block which would let you apply more pressure at the top.
Bolts at 2.5 in long ?
jerry c on Oct 23, 2016

Please excuse my lateness in answering your question. I recently had open heart surgery and am now just starting to work through my e-mails. To answer your question: the bolts on my featherboard are 4"long. They may have packed the wrong ones with yours.

Gregg Pollack
Is this reversible? My band saw has the miter slot on the right side of blade and my table saw has the miter slot on the left side of blade, so I would need to turn it over depending on which saw I was using.
Randy F on Nov 10, 2015
BEST ANSWER: Yes this can be reversed.
What is the height of the double feather board?
Mark G. on Jun 21, 2017
BEST ANSWER: Each feather board is 3/4" thick and the spacer is 1.5" thick for a total stack of 3". You can stack the two feather boards on top of each other to make one 1.5" thick but you lose the alignment feature that the spacers provide.
Will these work on a Kreg phenolic router table?
ken s on Feb 17, 2019
BEST ANSWER: Yes they should. The fit any standard slot for table saws, shapers, and band saws
Prop 65 WarningWARNING: Cancer & Reproductive Harm -