Store Locator

Rockler Phenolic Router Table with Pro Fence, Rock-Steady Stand, Dust Bucket Kit and SL Lift

Enjoy the Pro Fence with jointer bars and dust port, a low-friction phenolic top, the SL Lift with button-release insert rings, and a Rock-Steady stand with our Dust Bucket below deck.

Item #
$979.99 Kit
In stock

Get Expert Advice

Return Policy

This package outfits our tough, low-friction Phenolic Router Table with the SL Router Lift, featuring Snap-Lock button-release insert rings, the Pro Fence, featuring jointer bars and tall knobs for comfortable adjustments, and our Rock-Steady steel stand with a Dust Bucket for collecting shavings both above and below the table. Our Pro Phenolic Router Tables feature one-piece 3/4'' solid phenolic construction for an ultra-flat, low-friction surface that won't warp, dent, scratch or delaminate, and a whiter, brighter finish for improved visibility. The 3/4'' T-profile miter slot accepts precision aftermarket miter gauges, while universal T-tracks in both the fence and table accept stops, hold-downs, featherboards and more. The Pro Fence features twin adjustable faces and includes a bit guard and dust port.


  • Large, low-friction table provides over five square feet of surface area
  • 8-point plate leveling system with two locking points
  • Includes Rockler Pro Fence with extruded aluminum backer, and integral jointing system
  • Tall ergonomic T-knobs for easy fence adjustment
  • Opening in fence is easily adjustable to accommodate large router bits
  • Accessory T-tracks in Pro Fence accept 5/16'' T-bolts, 1/4'' T-bolts, and 1/4'' hex bolts
  • Fence includes a 2-1/2'' OD (2-1/4'' ID) dust port
  • Bit safety guard helps keep fingers away from the cutting area
  • Dust Bucket includes dual port that captures routing debris from both above and below the table
  • Heavy-duty steel stand with powder-coat finish: 14-gauge for stretchers, 10-gauge for legs
  • Holes in legs are spaced 32mm apart for attaching optional hinge brackets, drawer slide/shelf brackets and panels

Includes the SL Lift, featuring the Snap-Lock insert ring system for easy bit changes!

For woodworkers looking for an affordable mid-sized router lift with solid performance and features, the Rockler Snap-Lock Router Lift rises to the top. It satisfies the basic requirements of a good router lift: a flat, low-friction plate and smooth lifting action for comfortable, aboveboard bit height adjustments. Add to that our much-loved Snap-Lock insert ring system, which lets you change rings with the push of a button. This means you can quickly raise the router to its highest point for easy, above-table bit changes, without having to search for tools or remove screws to get the insert ring out.


  • Adjust bit height and change bits easily and comfortably from above the router table
  • Rigid 3/8'' thick phenolic plate for flatness and low-friction sliding
  • Award-winning Snap-Lock technology: just push the button to release the insert ring for fast bit changes—no tools to search for; no screws to lose
  • Includes one insert ring with a 1-1/2'' opening; additional Snap-Lock inserts available separately (e.g. #55415)
  • Lift housing accepts a wide range of medium-sized routers (see below)
  • Includes starter pin for routing without fence using bearing-guided bits

Will the SL Lift fit my router?

The SL Lift accepts router motors with a 3-1/2'' diameter (10.99'' circumference). If you are unsure of your router motor's diameter, check the manual, or measure the circumference with a tailor's tape. The SL Lift is confirmed to be compatible with the following routers (not a complete list):

  • Bosch 1616
  • Bosch 1617
  • DeWalt 610
  • DeWalt 616
  • DeWalt 618
  • Bosch 1618
  • Porter-Cable 690 series
  • Porter-Cable 890 Series

Rockler Phenolic Router Table with Pro Fence, Basic Stand, Dust Bucket Kit and SL Lift
(1) Rockler Pro Phenolic Router Table
(1) Rockler Pro Fence
(1) Set of jointer bars
(1) Dust port
(1) Bit guard
(1) Rockler Rock-Steady Router Table Stand with leveling feet and hardware
(1) Router Table Dust Bucket with Dual Port
(1) Dust hose, 36'' long x 2-1/2'' diameter
(2) 2-1/2'' Stainless Steel Hose Clamps
(1) Rockler SL Router Lift
(1) Hex wrench
(1) Lift wrench
(1) Starter Pin

More Information
Weight 100.070000
Tech Spec
  • Brand: Rockler
  • Manufacturer Part Number: 65117, 49428, 47905, 56248, 54030, 52309, 34203

Phenolic Top, Pro Fence and Stand:

  • Top Dimensions: 24'' x 32'' x 3/4''
  • Top Material: Solid Phenolic
  • Compatible Plate Dimensions: 8-1/4'' x 11-3/4''
  • Stand Dimensions: 26'' wide x 18'' deep x 32'' high
  • Stand Material: 14-gauge steel for stretchers, 10-gauge steel for legs
  • Stand Finish: Durable black powder-coat
  • Stand Leg Hole Spacing: 32mm
  • Stand Stretcher Mounting Location: Flush with top or about 5-1/8'' down
  • Fence Material: Aluminum and MDF
  • Fence Length: 32''
  • Effective Fence Height: 3-1/2''
  • Dust Port I.D.: 2-1/4''
  • Dust Port O.D.: 2-1/2''
  • Plate Leveling: Yes; 10-point leveling
  • T-Track Compatibility: 5/16'' T-bolts, 1/4'' T-bolts, and 1/4'' Hex bolts

SL Lift:

  • Compatible Motor Diameter: 3-1/2'' (10.99'' circumference)
  • Plate Dimensions: 8-1/4'' x 11-3/4'' x 3/8'' thick
  • Plate Material: Phenolic
  • Insert Ring Inside Diameter: 1-1/2''
  • Vertical Travel: Approximately 5-1/2'' (varies w/installation)
  • Lift Adjustment Rate: 1 revolution = 1/16''

Dust Bucket:

  • Material: Steel
  • Finish: Blue powder-coat
  • Bucket Width: 13''
  • Bucket Depth: 10''
  • Bucket Height: 13''
  • Mounting Tab Width: 1-1/2''

Prop 65 WarningWARNING:
Cancer and Reproductive Harm. For more information go to
Prop 65 WarningWARNING:
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to