Store Locator
$799.99 Kit
Additional Shipping and Handling Charge: $20
Temporarily Oversold

Get Expert Advice

Return Policy

Rockler ProMax Cast Iron Router Table Top, Router Lift FX, 32'' ProFence and Stand

Solid cast iron for the ultimate in durability and stability—includes 32'' ProFence, stand and the Router Lift FX for easy adjustments above the table!

Item #
65200
Rating:
20% of 100

Nothing beats cast iron when it comes to a sag-free, dead flat surface and reliable performance year in and year out. The Rockler ProMax Cast Iron Router Table Top hits those points, and builds in all the best features, too. A one-piece top weighing in at over 50 pounds and measuring a full 32'' wide, it provides vibration-dampening heft for the smoothest possible operation. Spin the largest bits your plate and router can accept—the table won't bat an eye. And with a host of premium features like our dual-track accessory/miter slot, 10-point plate leveling system and pre-tapped holes to accept our optional Dust Right Dust Bucket and Dado Dust Chute, the ProMax delivers professional router table performance that will last for generations. Plus, this package includes the Rockler FX Router Lift, which lets you make easy height adjustments from above table and a sturdy steel stand. Topped off by the 32'' ProFence, a precision-milled aluminum fence with two MDF sub-fences, jointer bars, front and rear T-tracks, a 2-1/2'' dust port and an integrated bit guard.

Features:

  • Strong, durable 1-1/2'' thick solid cast iron table is machined flat and weighs over 50 pounds to reduce vibration for smooth routing results
  • 32'' x 24'' tabletop provides more than five square feet of work surface and is designed to stand up to heavy use
  • Dual Track with Universal T-track and miter slot is machined directly into the table's surface
  • 10-point plate-leveling and locking system maintains a perfectly flush surface and prevents plate from shifting during cut
  • Underside of tabletop features tapped holes (and included screws) for mounting Dust Right Dust Bucket (#56248, sold separately), Dado Dust Chute (#57495, sold separately), and the included Steel Stand
  • One-piece aluminum fence frame is fully machined on the front and bottom surfaces, ensuring the ProFence is flat, true and square
  • MDF sub-fences adjust without tools, perfect for zero-clearance setup
  • ProFence includes heavy-duty bit guard and dust port on the back of the fence
  • ProFence also features EZ-Load Universal T-tracks that accept 1/4'' and 5/16'' T-bolts as well as 1/4'' hex bolts - perfect for hold-downs, stops and other accessories such as featherboards
  • Top is pre-drilled for the included Rockler Router Table Steel Stand, which also has pre-drilled holes for adding a cabinet

Includes the Rockler FX Router Lift for easy height adjustments from above the table!

Adjust bit height quickly and easily from above your router table, and enjoy sag-free support thanks to the heavy-duty plate. The plate is perfectly sized to fit all of our new router tables, while the lift housing accepts a wide range of small- to medium-sized routers.

The Router Lift FX accepts the following routers:

  • Bosch 1616
  • Bosch 1617
  • DeWalt 610
  • DeWalt 616
  • DeWalt 618
  • Bosch 1618
  • Porter-Cable 690 series
  • Porter-Cable 890 Series
  • Compatible with large opening inserts

(1) Rockler ProMax Cast Iron Router Table Top with hardware
(1) 32'' Bench Dog ProFence
(1) Set of jointer shims
(1) Bit guard
(1) 2-1/2'' Dust port
(1) Rockler Router Lift FX
(1) 8-1/4'' x 11-3/4'' aluminum router plate
(1) Insert ring (1-1/2'' I.D.)
(1) Lift winder
(1) Rockler Steel Stand

More Information
Brand Rockler
Weight 54.3500
Tech Spec

Top, Stand and Fence:

  • Table Top Dimensions: 32'' x 24'' x 1-1/2''
  • Stand Material: Steel
  • Stand Dimensions: 18''D x 26''W x 32''H
  • Top Material: Cast iron
  • Fence Dimensions: 3-1/2''H x 32''L
  • Fence Material: Aluminum and MDF
  • Plate Leveling: Yes; 10-point system
  • Dust Port I.D.: 2-1/4''
  • Dust Port O.D.: 2-1/2''


Router Lift FX:

  • Plate Dimensions: 8-1/4'' x 11-3/4'' x 3/8'' thick
  • Plate Inside Diameter: 3-11/16''
  • Insert Ring Inside Diameter: 1-1/2''
  • Vertical Travel: ~5-1/2'' (varies w/ installation)
  • Adjustment Rate: 1 revolution = 1/16''
1.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
0
0
0
1
Poor quality control
Finally got my table set up. For the price I am not impressed at all. The cast iron has a sag in the middle and towards the back. The knobs to lock the fence in place just spin unless I reach under and grab the bolt head. The fence comes with mdf sub fence- without a laminate face, but if U buy the fence by itself it is faced with laminate. And as stated by a lot of other reviews the router lift increments are off. I wanted a cast iron router table so it would b flat and am not happy. I wish I would have checked it out when I bought it so I could return it. Very poor quality control.
June 28, 2020
Purchased
1 month ago
Woodworking Experience:
Advanced
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Will this table accept triton router?
Lawrence S on Jun 8, 2020
BEST ANSWER: Yes, you will need the Rockler router table C insert for the Triton. You will need to drill it for the lift to be accessed.
Prop 65 WarningWARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov/product

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood