Rockler Rolling Utility Ladder - Track Hardware, Zinc
Use our Ladder Design Wizard to pick the ideal style for your application and to receive a full list of products suggested to build your Rolling Utility Ladder!
Item #
GRP32636_2
Build a ladder for easy access to the highest shelves in your garage or workshop! Our Utility Ladder Hardware Kit features a locking roller system that captures the top rail, resulting in a ladder that rolls smoothly and quietly to wherever it is needed. The bottom legs of the ladder are fitted with rubber pads that grip the floor for stability. To move the ladder, you simply lift it slightly and roll it along the rail to the location you want. The locking wheel assembly rides along the top rail, guiding the ladder as it's re-positioned. Once you've retrieved what you need, you can push the ladder up against the wall or cabinet, and out of the way. You can purchase as many tracks as you need to span a wall, or have multiple tracks on several walls with a single ladder that is moved from track to track. The basic hardware kit makes an 8' ladder with seven steps, and additional steps can be purchased to make a taller ladder. To make constructing your ladder as fast and easy as possible, we also offer pre-machined oak Wood Kits as an accessory - just sand, finish and assemble.
Use our Ladder Design Wizard to customize your own ladder system to your application and preference. After selecting your options and features, you will obtain a Bill of Materials that is your guide for ordering.
Notice: Wood is not included (sold separately).
Utility Ladder 6' Track (#47579):
(1) 6' Utility Ladder Track
Utility Ladder Track Bracket, Vertical Mount (46973):
(1) Utility ladder track bracket
(2) #12 x1-1/2'' Pan head mounting screws
Utility Ladder Track End Cap (#46640):
(1) Track end cap
(1) M6 Hex wrench
(1) 6' Utility Ladder Track
Utility Ladder Track Bracket, Vertical Mount (46973):
(1) Utility ladder track bracket
(2) #12 x1-1/2'' Pan head mounting screws
Utility Ladder Track End Cap (#46640):
(1) Track end cap
(1) M6 Hex wrench
| Brand | Rockler |
|---|---|
| Weight | 7.5000 |
| Tech Spec | Utility Ladder 6' Track (#47579):
Utility Ladder Track Bracket, Vertical Mount (#46973):
|
4.2 / 5.0
5 Reviews
Perfect for my shop with 12' ceilings.
I have a cabinet shop with 12' ceilings and I installed some cabinets up high to store tools, hardware etc... This ladder is very convenient to use and was easy to install. I would like to have wheels on the bottom instead of rubber feet though.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
excellent quality
the parts are well made and designed well. Works perfectly.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Looks nice, installs easily
Can be a little bit of trouble to install in you have less than 6 feet clearance on one of the side of your shelves. I built 11 ft. long shelves in a 12 ft. room, so I had to pre-drill holes for the brackets, place the brackets on one length of track, and install.
The end caps need about 1-1/2 inch for clearance from the brackets, though the instructions say 1-1/8 inch is sufficient. I found that was no enough, and had to cut the rubber stopper in half to get one end cap to fit.
The end caps need about 1-1/2 inch for clearance from the brackets, though the instructions say 1-1/8 inch is sufficient. I found that was no enough, and had to cut the rubber stopper in half to get one end cap to fit.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
July 15, 2018
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Rolling ladders
Customer didn’t like it, too industrial looking.
- Was this review helpful? Yes (0) No (2)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (2)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 13 questions
Browse 13 questions
and 26 answers
Why did you choose this?
Rockler Store
Adding on to what I already have.
Kevin W
on Sep 29, 2017
Ease of installation
Warren P
on Oct 11, 2015
Adding on to what I already have.
Kevin W
on Sep 29, 2017
Price and ease of shopping
Fredrick Webster, C
on Oct 9, 2016
Price and ease of shopping
Fredrick Webster, C
on Oct 9, 2016
match current
James H. N
on Jun 29, 2015
I need the rollers/hardware shown in your picture.....cant find them on your site?
BEST ANSWER: I'm sorry, the main components for this ladder style are no longer available.
- Reply
- Inaccurate
- David Staff on Jul 25, 2017
where are the track unions. can't find them in search or hardware
BEST ANSWER: Item 46973
This is what I would use to not only support the rail (track), but to join two together, thus forming a union.
I hope this helps you.
This is what I would use to not only support the rail (track), but to join two together, thus forming a union.
I hope this helps you.
- Reply
- Inaccurate
- Bobby R on Feb 22, 2016
- Purchased on Jun 3, 2014
I don't see listed the roller bracket attachment to the ladder??
BEST ANSWER: Those are part of 45805 http://www.rockler.com/rockler-rolling-utility-ladder-ladder-hardware-zinc
- Reply
- Inaccurate
- Steve Staff on Feb 10, 2016
is there a product that allows you to turn a corner to slide it out of sight when not in use??
BEST ANSWER: No, but if you purchase the ladder hardware that hooks to the rail, you can then lift the ladder off and hang it on another rail or lean it off to the side.
- Reply
- Inaccurate
- Carl T on Jul 13, 2016
- Purchased on Dec 2, 2014
can you lift the utility ladder off the rail?
BEST ANSWER: Yes. The lower plastic piece under the rail has two positions. You change it from locked to unlocked by rotating this piece 90 degrees. In the unlocked position the ladder can be lifted off.
- Reply
- Inaccurate
- Andrew R on Jul 24, 2015
- Purchased on Jun 17, 2014
Is there an handle accessory kit for the top of the ladder?
BEST ANSWER: There is not. The track brackets stand the track off far enough from the wall that it makes for a sturdy grab bar. If you want to climb higher you an always design the side rails of your ladder to extend past (above) the track height and install a dowel between them. Using Rockler's hardware we've built several rolling ladders, including one for a local distillery with a platform at the top deep enough to stand on. The hardware is very well made.
- Reply
- Inaccurate
- Carl T on May 29, 2016
- Purchased on Dec 2, 2014
Are ladder shoe pads and brackets included in rolling ladder kit? Are they sold seperately?
Rockler Rolling Utility Ladder - Track Hardware, Zinc
BEST ANSWER: Peter C.,
My recollection is that it was all included in the kit. I didn't purchase any additional hardware and had all I needed to assemble my latter. I did order extra rail, but I had two separate areas that required use of the ladder.
John C.
My recollection is that it was all included in the kit. I didn't purchase any additional hardware and had all I needed to assemble my latter. I did order extra rail, but I had two separate areas that required use of the ladder.
John C.
- Reply
- Inaccurate
- John C on Sep 6, 2017
- Purchased on Jan 3, 2016
Can the ladder be cut?
BEST ANSWER: I don’t see why not. It comes unassembled so you can cut to length per your needs easily
- Reply
- Inaccurate
- Dustin G on Apr 30, 2018
- Purchased on Jun 7, 2016
How do I lock the wheels on the rolling library ladder so when I step on it, it does not move?
BEST ANSWER: No wheels on the bottom of the ladder. Only rollers on the top of the ladder that runs on the bar. Just lift the bottom of the ladder and roll along the bar. Works great.
- Reply(1)
- Inaccurate
- George S on Jun 4, 2017
- Purchased on Jul 30, 2015
Hi I am after the track mounts that come straight off the wall, the vertical mount but you only seem to have them in the zinc finish. I want them in satin black. Can you help?
BEST ANSWER: If you are making the utility ladder then we only have the mounts that come straight out from the wall. Other brackets will not work with the rollers on this ladder
- Reply
- Inaccurate
- Rick H Staff on Oct 7, 2015
We need a ladder for our cupola. It's a tight space so needs to go flat against the wall when we aren't using but want it easy enough for kids to pull out to use. What is the hardware needed for this? Thanks!
BEST ANSWER: You can go on to Rockler.com and go through our ladder wizard.
http://rollingladder.rockler.com/
http://rollingladder.rockler.com/
- Reply(1)
- Inaccurate
- Rick H Staff on May 21, 2018
Where is the vertical mount? It doesn't appear in the ordering list at the bottom. I only see track, brackets, unions and end caps.
BEST ANSWER: Sorry, but it appears that the utility ladder has been discontinued for our ladder line.
- Reply
- Inaccurate
- Rick H Staff on Sep 20, 2017
Can I order custom length tracks, ladders, etc?
BEST ANSWER: Track sold in 6 foot lengths. You can cut track as needed or use the splice offered to create any length needed. Wood ladder kits for this utility ladder are offered in 8, 9 and 10 foot length http://www.rockler.com/rockler-rolling-utility-ladder-wood-kits
You can cut these down as well.
You can cut these down as well.
- Reply
- Inaccurate
- Steve Staff on Apr 7, 2017
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.govWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Related Products
More Suggestions
