VIEW
GRP40093
In stock
These V-Groove Bit is ideal for making signs and adding decorative accents to furniture and plaques.
Commonly used for sign-making, these V-groove Bits provides excellent shadow and definition for letters and text. It is also ideal for fluted columns, or for adding a bead-board effect to panels. Top quality bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes. 1/2" shank.
(1) V-Groove Router Bit
| Brand | Rockler |
|---|---|
| Manufacturer Part Number | No |
| Weight | 0.1800 |
| Tech Spec | No |
| Technical Documents | No |
| Bit Type | No |
| Diameter | No |
| Cutter Height | No |
| Shank Size | No |
| Flutes | No |
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.govWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
5.0 / 5.0
3 Reviews
no problems; order processing and shipping was fine, bit exactly as described
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Great Bit
I use this bit on my CNC router and it cuts through plastic and wood with very clean results.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question
Browse 1 question
and 2 answers
Why did you choose this?
Rockler Store
I have a bunch of Rockler router bits and have come to trust them as I do all Rockler products.
James K
on Oct 12, 2017
Add decorative detail on furniture legs
Daryl O
on Aug 11, 2017
I have a bunch of Rockler router bits and have come to trust them as I do all Rockler products.
James K
on Oct 12, 2017
Rocker bits are great........
Gary G
on Aug 19, 2017
What is the height of the angled section of the 90º bit, please?
BEST ANSWER: In a perfect world, anytime you have a 90-degree V-Bit, the depth will always be one-half of the diameter. The diameter is listed as 3/4"; so half of that is 3/8" (0.375") which would be the maximum depth you could get before the sides become parallel. The bit I measured was 0.005" wider than 3/4" D specification which resulted in a slightly deeper grove from 0.375" to about 0.400". With this Rockler brand bit, drilling any deeper than 0.400" will result is a parallel recess above the 90-degee V-cut.
- Reply(1)
- Inaccurate
- Greg S on Dec 27, 2016
- Purchased on Feb 7, 2015
Frequently Bought Together
More Suggestions