Let's face it, no woodworker particularly enjoys cleaning saw blades or router bits, so the easier we can make it, the better. This kit does just that, combining an extremely effective saw blade cleaning solution with two conveniently-sized containers that allow you to soak your blades and bits and let the blade cleaner do the brunt of the work for you. A brass brush is also included to whisk away the more stubborn particles. With clean, cool-running cutters, you'll get more precise cuts, a longer cutter life and spend far less on sharpening costs.
- The jumbo sized "blade bath" features a raised inner ring, which prevents the blade from suctioning to the bottom.
- 14" inside diameter accepts a 12" blade with plenty of room at the edges for easy removal.
- Kit includes 14" plastic blade bath with lid, 1 quart (makes 1 gallon) of Pitch and Resin Remover-a highly effective saw blade cleaner-brass-bristled scrub brush and a 6 oz. plastic jar with lid for cleaning router bits.
- (1) 14" blade bath with lid
- (1) Quart of Pitch and Resin Remover (makes 1 gallon)
- (1) Brass-bristled scrub brush
- (1) 6 oz. plastic jar with lid for cleaning router bits
Excellent ProductPosted January 19, 2014
I rarely write reviews for products, but had to make an exception for this blade/bit cleaning solution. After using it to clean a single saw blade and experiencing how well it works, I went on a rampage cleaning every blade and bit in my shop. Even ones that I had tried to clean using other products. The results are very good. My only complaint - the bristles came out of the brass wire brush half way through the first saw blade. This would have received 5 stars if it weren't for that.
Save your money! The tub had...Posted September 9, 2013
Save your money! The tub had a warped bottom and it took twice the amount of solution to cover the blade. I had some blades that had been used only a few months and some that had not been cleaned in years. None of the blades cleaned up very well at all. I'm going back to my spray cleaner!
Lid out of the box was...Posted May 30, 2013
Lid out of the box was warped and would not seal. Used brush on one blade and it showed significant wear after use. Blade was not that dirty but cleaned up well as advertised.Cannot store solution in container with seal issues as noted Requires a large amount of cleaner as well to fill to the point to cover single 10 in. blade (app. 25% of included cleaner solution).
I used this in the same...Posted May 26, 2013
I used this in the same manner as the wood whisperer demonstrated in a video tutorial. Good lord how it completely rejuvenated my router bits! Very Impressed.
The cleaning solution is fine. The...Posted April 28, 2013
The cleaning solution is fine. The blue tub is 14" in diameter, which is very large. That's a fault for two reasons: First, it takes too much fluid to fill for a 12" or 10" blade, let alone for a smaller blade! and second, it is pretty large for storage when shelf space is limited anyway. If you're running a good ol' sawmill, the tub would be too small, but for the normal woodworking shop, better to just get the cleaning solution and find a couple of nesting RubberMaid tubs that fit the blades we normally use.