The SawStop Zero Clearance Lock Down Insert can be used on all SawStop Table Saws using 8" dado blades. Made from high-quality, ultra strong phenolic core material covered on top and bottom with low-friction, wear-resistant melamine surface. Includes positioning screws that ensure a precise fit in the table. Features a positive locking latch allowing for tool-free operation.
(1) SawStop Zero Clearance Lock Down Insert
Brand | SawStop |
---|---|
Manufacturer Part Number | TSI-DLD |
Weight | 1.8000 |
Tech Spec |
|
4.9 / 5.0
11 Reviews
SAW STOP zero clearance insert.
What can I say, its a zero clearance insert that works as advertised.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Sawstop Zero Clearance Lock Down Insert for Dado Blade
After installing the Sawstop Dado Brake Cartridge and dado blade on my saw, I installed the Zero Clearance Lock Down Insert. Adjustments to the insert were easy to make so that it was flush with the saw table top. I turned on the saw and slowly raised the dado blade to cut through the insert. The blade cut cleanly through the insert and I have made multiple dado cuts for my current project (a dresser for my daughter). Everything works great.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
typical Sawstop product
Great product, seems like it will last a very long time. Well made and thought out.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Good Product
I needed an insert for my dado blades on my Sawstop and this one worked well.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Too complicated to make my own so bought this one
Fits like the original
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
easy to setup and use
I like the zero clearance. Cutting the lock down exactly to the blade also really helps with the setup of the cuts.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Works Great!
Thai is a tool I hope I don't have to use. At least now, I can set up my Dado set.
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
Zero clearance
saw stop has a lock down system on thier plates so your pretty well locked to buy only thiers but I don't go thru too many.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Must have for the SawStop Table Saw
Top of line fit and finish that I have come to expect from SawStop. Great design and easily removable.
- Was this review helpful? Yes (2) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions
Browse 2 questions
and 46 answers
I have a CNS175, but the insert must be held in place with a button head Allen screw. Will this insert work with that saw? Thanks.

SawStop Zero Clearance Lock Down Insert Dado Blade

BEST ANSWER: Cecil R: Thank you for your question. Yes, you can use both of these inserts on your SawStop Contractor Saw. You will no longer have to use the button screw with our current inserts. Have a great day.
- Reply
- Inaccurate
- SawStop S SawStop Expert on Sep 23, 2019