Combines good looks and practicality. Add a touch of class to your finest tables with this lock. Secures leaves and adjoining table halves to prevent gaps.
(1) Solid Brass Table Lock
| Brand | Rockler |
|---|---|
| Weight | 0.1500 |
| Tech Spec |
|
| Discountable | Yes |
| Hardware Type | Locks |
4.3 / 5.0
6 Reviews
Did the trick!
Used these for a customer who had used cheap replacement table locks. They were impressed with how well these were constructed as well as how well they worked. Well worth a little more money to have a quality product that will last.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Simplicity works
Looked to be a pretty basic latch for my purposes and it worked very well. Used 4 of them on a restored dining table with a single 24" leaf to hold the various pieces together. Recommend cocking the individual two pieces 1/8" to effect a variable tightening latch ability. Kit includes three types of straight slot brass screws, but only the flat head screws are usable as the oval heads will not clear the latch. Would recommend using Phillips, Allen or Torx head screws in hard wood instead of what is supplied.
- Was this review helpful? Yes (6) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (6) No (0)
- Flag as Inappropriate
Table lock found!
We replaced a missing table lock and it works beautifully! Thank you for stocking a needed item.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Nice latch
This was a replacement for an old iron table latch on an antique table. It did the job nicely and looks very nice as well. Over time, I hope it develops a nice antique brass patina.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Look good but work very poorly
They are expensive and look very nice. The lower cost Rockler clamps which I purchased previously for a different project don't look as nice, but work very well. These are almost impossible to operate.
- Was this review helpful? Yes (1) No (2)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (2)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions
Browse 5 questions
and 10 answers
Why did you choose this?
Rockler Store
used on a previous project, and liked them very much.
SCOTT K
on Jun 17, 2019
Seems to be a good quality product.<br />Hope it proves to be true :)<br />Why do you have my husband's name and year of birth????<br />Alix
Philip S
on Feb 1, 2019
used on a previous project, and liked them very much.
SCOTT K
on Jun 17, 2019
Solid brass construction.
DWIGHT FORCE R
on Apr 14, 2019
Solid brass construction.
DWIGHT FORCE R
on Apr 14, 2019
Wanted a high quality, relatively easy to operate set of table locks for a table with two removable leaves.
John M
on May 30, 2018
What is the size of the smaller half moon? With a 2 inch diameter it would be a 1 inch radius, but it doesn't appear to be split in half, so what is the "height?" I want to use this as a vertical latch on a box but the lid is thin,~0.75 inches.
How long are the brass screws for attaching to the table?
BEST ANSWER: 9/16" or 10mm (same thing as far as I can tell), from flat of head to tip of thread
- Reply
- Inaccurate
- James R on Jul 31, 2015
- Purchased on Sep 12, 2014
I have a small folding table so two half moons need to be held together. The diameter of the round thus created is only 15.5 inches so intend to put this item in the middle to hold the two moons together robustly from the underneath clearly. The timber is 1/2 inch thick and table is only 20 inches high so quite light etc. Would this do the job?
BEST ANSWER: I used it on a much larger table (48" )and it worked fine. I placed one on each end of the seam. For 20 inches, you may get by with just one, or use two smaller locks.
- Reply
- Inaccurate
- Benny H on Jan 13, 2017
- Purchased on Aug 4, 2015
Are two required, one on each side?
BEST ANSWER: We used two on a 45" table. Possibly if your table was narrow. 36" or less, one might work.
- Reply
- Inaccurate
- Carolyn S on Oct 11, 2015
- Purchased on Jan 27, 2015
The locks I am replacing measure 2 1/2". Will these still be suitable?
BEST ANSWER: Ours are 2" - would probably work for you
- Reply
- Inaccurate
- June F on Feb 29, 2016
- Purchased on Jan 6, 2015
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.govWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Related Products
