Receive Free Shipping Every Day on Orders of $35 or More. Click Here to Learn How!
Receive Free Shipping Every Day. Click Here to Learn How!
Cart

51020 - Eagle Cane Head Handle Zoom

Solid Cast Brass Cane Heads

product name price quantity total
Regency Cane Head Handle Item #: 50984
In Stock
 
$19.99

Each 		$19.99
Find in Store
Eagle Cane Head Handle Item #: 51020
In Stock
 
$19.99

Each 		$19.99
Find in Store
Brass Oval Cane Head Handle Item #: 51044
In Stock
 
$19.99

Each 		$19.99
Find in Store
Regency Cane Head Handle Item #: 50984
In Stock
 
Price:
$19.99
Each
Quantity:
Total: $19.99

Find in Store
Eagle Cane Head Handle Item #: 51020
In Stock
 
Price:
$19.99
Each
Quantity:
Total: $19.99

Find in Store
Brass Oval Cane Head Handle Item #: 51044
In Stock
 
Price:
$19.99
Each
Quantity:
Total: $19.99

Find in Store

Overview

Distinctive heads for your accessory needs. Use one of these heads for your back scratcher, clothes brush, shoe horn, umbrella and walking cane hardware. You can also use common heads to develop a theme, and customize your set by turning stock from your favorite wood species.

What's included

(1) Solid Cast Brass Cane Heads

Technical Details

Product Warnings

WARNING This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product

Technical Downloads

Frequently Bought Together

Questions and Answers

Powered by TurnTo
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions Browse 6 questions and 48 answers
Why did you choose this?
Rockler Store
I have 3 of them now
ELDEN S on May 10, 2017
I have never used this item but considering the quality of previously ordered items I have no doubt that it is the quality that I expect.
John H on Dec 17, 2016
I have 3 of them now
ELDEN S on May 10, 2017
wife now needs a cane. I already made one for myself.
Dale B on Mar 8, 2017
I have never used this item but considering the quality of previously ordered items I have no doubt that it is the quality that I expect.
John H on Dec 17, 2016
I have assembled them before and like them very much Also, they fit my hand quite well!
max D.I.Y on Dec 1, 2016
To check quality for possible orders.
Robert R on Nov 17, 2016
I wanted top quality
Roger W on Nov 13, 2016
price
Michael J. B on Oct 28, 2016
same as above
Raymond S on Oct 14, 2016
Hobby project completion.
Leonard D on Aug 22, 2016
PRICE AND STYLE
Rusty T on Mar 16, 2016
I like the look and the symbolism
Edward K. W on Mar 13, 2016
To see if it will fit his great grandfathers cane
K J on Jan 18, 2016
I did note order the eage. I ordered the Regency cane head.
Terrence R on Jan 15, 2016
LIKE THIS CLASSY EAGLE
ronald u on Nov 7, 2015
I like the looks of the eagle.
Richard A on Oct 2, 2015
husband wanted it
Merri V on Oct 1, 2015
Personal project
Michael Albert S on Sep 26, 2015
Top seller for our canes.
Phill A on Sep 7, 2015
I like the eagle head.
William M on Sep 6, 2015
excellent reviews and a good price
nicholas s on Aug 14, 2015
Fits the Veteran/Cane program I do and easy to work with...ends up beautiful...American eagle for USA Vet...how appropriate.
Rick R on Aug 2, 2015
I'm replacing a broken one just like it for my grand pa.
Forest G on Jul 30, 2015
Have purchased before. Need another
William S on Jul 29, 2015
Because I wanted it !!!!!
Raymond M on Jul 26, 2015
ANOTHER PROJECT TO DO
THOMAS S on May 31, 2015
I have made my grandson a walking stick and want to put this on as a handle.
Eugene K on May 30, 2015
Have a order for this type head
Artty S on May 7, 2015
Good quality brass cane head
Michael S on May 1, 2015
wife now needs a cane. I already made one for myself.
Dale B on Mar 8, 2017
I have assembled them before and like them very much Also, they fit my hand quite well!
max D.I.Y on Dec 1, 2016
how long is the cane handle? I need 5 or more inches.
A shopper on May 15, 2015
BEST ANSWER: This cane handle adds 3 to 3 1/4 inches to the total length.
whats the best way to thread the wood shaft?
jim j on Apr 17, 2015
BEST ANSWER: You do not thread the shaft. The collar is meant to be screwed onto the shaft, we had to carefully sand-down the wood-shaft to the point of being able to screw the brass firmly onto the wood. We also filled the threaded brass with a high quality wood glue, it oozed a bit, but we cleaned it up, and after 24 hours we had a completed, good looking and fully functional Cane. Hope this helps. (We used an upright adjustable belt type sander to reduce shaft size to make the brass collar fit.
i have bought cane handles before that are really too small a man's hand. What size are these?
A U on Feb 11, 2016
BEST ANSWER: Handle aprox 3 3/4 inches. Very comfortable , my hand about 4 inches across under the fingers index to pinky.
Could I use a 1" walnut dowel for the cane shaft?
Glenn C on Jul 1, 2015
BEST ANSWER: Yes, just adjust the length and decrease the width to fit inside the brass as the brass has an out side diameter of about one inch. Have made canes from the oak, walnut and cherry. Have received the highest compliments on the cherry
I have an existing cane, and want to change the handle. The brass collar that screws onto the eagle styled handle does not match the 'Brass Cane Hardware' I purchased. I need a brass piece that will screw into the eagle collar that can be affixed to the cane shaft. I assumed these canes used a common technology, but clearly they do not. The existing cane shaft has a ⅜" fine threaded rod that is threaded and glued into the wood shaft, and can not be removed. The obvious solution would be to find a brass fitting that screwed into the collar that attaches to the handle on one end, with a female receptacle on the other end, mating both handle and shaft together. Any ideas on how to fix this?
Joseph G on Mar 4, 2017
BEST ANSWER: A possible solution would be to cut the end with the screw attached to existing cane shaft then follow the directions precisely to add new handle if any length difference it might be made up on the bottom of cane. As I stated this is a possible solution. Good luck. John

Reviews

Powered by TurnTo
4.7 / 5.0
26 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
20
4
1
1
0
Good looking Eagle Head casting. Good...
Good looking Eagle Head casting. Good feel in the hand. I'd buy this product again without question.
March 2, 2011
One good lookin' and tough handle!...
One good lookin' and tough handle! Our first barley twist cane with this solid brass handle brought us many more sales. We've ordered more! Great product and very sturdy.
December 1, 2010
Nice detail on the eagle head,...
Nice detail on the eagle head, no casting lines. Threads were pristine and without flash.The package arrived within four days of ordering. I'd ordered a number of things on the same day, but this beat their arrival by nearly a week! I hand carved the stick and added three coats of gloss black. Any 19th century gentleman would have been proud to own this cane.
September 23, 2010
I used the Oval Handle on...
I used the Oval Handle on a 130 year old Ebony Cane that had a leather handle that had become lost. I was able to mount the cane on my lathe and cut a tenon on the handle end. I was lucky the cane and handle were the same size and it looks like they were made for each other. High quality.
January 14, 2010
Looks great
I used solid walnut for my cane shaft. I don't have a lathe so after I cut a 1 1/2 inch square piece off a 2 by 8 board, I rounded it with a router, then used a benchtop sander to refine it. I waited until the cane head arrived to sand to the final size. After staining and polyurethane, I screwed the head onto the top of the shaft, cut to length, and added a cane tip. People who see it simply cannot believe I made it myself. I did buy the hardware set as well, but I didn't use it will probably return it, or keep it for a future cane. I'm sure the kit is fine, just not for this project.
February 16, 2015
Guys!!! I took this Eagle head...
Guys!!! I took this Eagle head to [local home center], & it screwed onto the threaded end of a piece of 7/8 black waterpipe, like it was born there! Took a 4 ft length of that home, cut it down, sanded & sprayed it gloss black, popped a rubber cane tip on the other end, & now I have a generic looking Trojan Horse walking stick, For less than $25!
January 12, 2010
I hand carve very unique walking...
I hand carve very unique walking sticks and hiking staffs. I purchased two of Rockler's Brass cane heads and attached them to pieces of highly carved Teak Wood. They're beautiful, very fine quality, and added an very high touch of class to the pieces. Shipping was fast and after dealing with other companies for over 30 years, Rockler is now my choice for not only cane heads, but all my hardward needs.
May 6, 2008
cane heads
Have bought 2 different heads. Well made and look classy
February 22, 2017
Purchased
 4 months ago
Woodworking Experience:
Intermediate
Brass cane head
Great product with good quality. fast delivery.
January 19, 2016
Purchased
 1 year ago
Woodworking Experience:
Advanced
Makes a fine showpiece for Granddad
Makes a great looking cane. Very sturdy and durable. Combined with a beautiful hardwood this makes a cane you can be proud of.
November 20, 2015
Purchased
 1 year ago
Woodworking Experience:
Beginner

More Suggestions

Feedback X