$5.49 Pack
In stock

Surface Mount Corner Brackets for Table Aprons

Item #
24279
Rating:
96% of 100
Surface Mount Corner Brackets for Table Aprons
Surface Mount Corner Brackets for Table Aprons

These brackets reinforce connections between table rails quickly and easily. No gluing and no clamping required.

(4) Surface Mount Corner Brackets for Table Aprons
More Information
Manufacturer Part Number 24279
Weight 0.7500
Tech Spec
  • Made from solid steel
  • Installation requires hanger bolts and wing nuts, not included
  • Size is 2-5/8" x 3-3/8" Flat
Hardware Type Corner Brackets
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

4.8 / 5.0
95 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
80
11
1
2
1
Good fit and good quality.
Small oak table
Small oak table
June 8, 2019
Purchased
4 weeks ago
Good brackets
They are made fine but didn't use them yet because of design change and now they don't work for this projet
March 31, 2019
Purchased
3 months ago
Woodworking Experience:
Intermediate
Worked well
March 25, 2019
Purchased
3 months ago
Easy connection
I'm saving these for a future project. I bought them for a dining room table project, but my legs were designed to fit inside the aprons instead of as shown in Rockler photo. Also my legs were rectangular. I was till waiting for these brackets to arrive, so I designed another way of fastening legs to table aprons. I built a box that fit around the pair of legs on each end and used my threaded inserts to fasten legs on 2 sides.
March 24, 2019
Purchased
3 months ago
Woodworking Experience:
Advanced
Just What I Needed
I have been looking for a sturdy corner bracket to use with the 3.50 inch square table leg and with information I received from Rockler I was able to secure the leg with no problem at all. Having the two bolt setup made attaching the legs to the apron with no wobble at all.
March 21, 2019
Purchased
3 months ago
Woodworking Experience:
Intermediate
Good quality
Highly recommend this product!??
March 11, 2019
Purchased
3 months ago
Woodworking Experience:
Intermediate
Excellent
Great for removable table legs
March 7, 2019
Purchased
4 months ago
Woodworking Experience:
Advanced
Sturdy, easy to use brackets.
After going to 3 box stores and 3 specialty hardware stores and no one having anything close. These were exactly what I was needing.
User submitted image
Added Feb 25, 2019
February 25, 2019
Purchased
4 months ago
Woodworking Experience:
Intermediate
Great!
The bracket worked perfectly for the table.
February 9, 2019
Purchased
4 months ago
Woodworking Experience:
Advanced
Excellent. Wish they come in a smaller size.
February 4, 2019
Purchased
5 months ago
Woodworking Experience:
Intermediate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 33 questions Browse 33 questions and 98 answers
Why did you choose this?
Rockler Store
A support brace on one of our dining room chairs broke. I'm hoping this will do the trick...
Wayne L on Jun 12, 2019
just what I needed
Steven G on Jun 8, 2019
A support brace on one of our dining room chairs broke. I'm hoping this will do the trick...
Wayne L on Jun 12, 2019
Couldn't find any other comparable hardware.
Teresa M on Jun 10, 2019
just what I needed
Steven G on Jun 8, 2019
could not find this anywhere else. I live in Canada!
Kris C on May 31, 2019
Rockler is the best choice when looking for woodworking items that no one else has and as usual they come through again thank you guys your the best I wish i could afford all the things i would like to get from your catalog but i buy what i can thank you again :)
Steve E on May 25, 2019
i wanted removable legs mounted with a table skirt
Marvin J on May 4, 2019
used before worked very well
Christine M. T on Apr 5, 2019
I believe they will work well to reinforce the leg-to-apron mortise and tenon joints on four tables in which the wood is splitting around the retaining dowel holes in the legs.
Chester M H on Apr 3, 2019
they fit to what I wanted
Bill on Mar 10, 2019
making a table
Kevin W on Mar 7, 2019
I need a way to break down dining table in case I ever have to move it. I'll need to make connection adapters since legs are not square and table apron goes around leg instead of as shown in photo.
Kenneth E on Mar 2, 2019
Having a 3.50 inch table leg, I asked for assistance as to which corner bracket would be best to use and I received information from Rockler that this bracket would be best for me to use for my project.
Thomas C on Feb 28, 2019
Seems to be simplest way to connect corners securely.
Derek S on Feb 26, 2019
Had a outdoor bench with wood version. It rotted and broke. So Iooked for a replacement and decided to replace all four corners.
Court S on Feb 20, 2019
Looked like it would do the job for the farmhouse table I'm building.
Matt S on Feb 20, 2019
same
vincenzo a on Feb 19, 2019
Building a farmhouse style dining table. Trying these brackets for the first time, hoping they make assembly and delivery much easier
Josh E on Feb 15, 2019
There will be build a bracket that holds the table leg good
John D on Feb 12, 2019
This is a quick and easy way to attach a leg to a table.
Kristopher D on Feb 11, 2019
Looks like this product will solve a problem with mounting legs to a kitchen island. We'll see.
RAYMOND B on Feb 7, 2019
Good reviews and I like the fact they screw into the table top as well.
James H on Feb 4, 2019
building a drop leaf table, would more stabilize the legs.
Stanley S on Jan 19, 2019
Need to stabilize table legs
Steven S on Jan 15, 2019
Table building
Justin M on Jan 14, 2019
I am building a table
Richard N on Jan 8, 2019
Perfect answer for my project
Dean O T on Jan 5, 2019
Stronger and more versatile.
Brave E on Dec 22, 2018
Refinishing old table need new hardware
Gary L on Dec 20, 2018
3 way connection to construct table
chris ronan A on Dec 10, 2018
Hoping for a lower profile in corners. Converting an existing table into a (board) gaming table. Building a lower box under the current table top. Converting tabletop into a series of removable sections.
Alexander L on Nov 17, 2018
Need to repair an older vanity bench that used mortise and tenon joints.
Mark S on Nov 13, 2018
Need to fix legs that are loose on my dining room chairs. I want to see if these will work.
Wendell R on Nov 9, 2018
WWGOA recommendation on a wood plan.
Danny M on Oct 22, 2018
I am making a farmhouse table and need mounting brackets.
Rhiannon M on Sep 23, 2018
Look like a well made bracket.
Arthur V on Sep 5, 2018
easy to use and strong connection
Robert L. H on Aug 14, 2018
I needed them
Roy L on Aug 11, 2018
To have a strong leg support.
Charles B on Aug 9, 2018
Making farm tables with removable legs. this will make that easier.
Robert T on Aug 8, 2018
I'm looking a corner brackets for my chairs , it come out your company and see this corner brackets for the table, ill try if this is the answer for that i'm looking for , if not can i return it back
CORAZON D on Aug 5, 2018
I liked this bracket having two hanger bolts and also being able to attach to the table top
Mark T on Jul 31, 2018
To finish a project
JON S on Jul 13, 2018
I have used them before and they work well.
Will on Jul 11, 2018
have used before and they worked well
jerry w on Jun 26, 2018
strength and ease,
Virgil W on Jun 23, 2018
needed for furniture...best price I could fine
Ronald J on Jun 20, 2018
to repair table legs
Brian K on Jun 20, 2018
Best way to firmly secure table legs.
Ronald G on Jun 10, 2018
I have used these in the past on a really heavy table. They made the corners very strong>
Kenneth M on May 5, 2018
I need something sturdy and easy to install for a new dining room table
James S on Apr 26, 2018
Couldn't find any other comparable hardware.
Teresa M on Jun 10, 2019
could not find this anywhere else. I live in Canada!
Kris C on May 31, 2019
What is the spread between aprons? (Actual dimension between the 45 degree bends) didn't see a tech drawing.
Nick H on Jan 11, 2017
what size hanger bolt go with these mounts?
Leonard E on Apr 11, 2015
BEST ANSWER: It looks like the hole on the bracket would accommodate up to about a 3/8 inch bolt. I don't have the table handy now, so I can't tell you what size I actually had. It was an existing table.
I need complete dimensions for this. I am going to try to use this to reattach a leg that has broke the wooden apron brackets?
meher on Jun 14, 2015
BEST ANSWER: From edge to edge [Keep in mind, the ends are angled at 45 degrees) 3 1/4" wide, 2 5/8" tall. the two angled edges that bolt to the table apron are 3/4" wide X 2 1/2" long and the top edge that bolts to the table top is 3/4" wide X 2 1/4" long.
How far apart are the holes on these brackets?
katja s on May 8, 2015
BEST ANSWER: 2 holes one above the other are 1-1/8" center to center.
Do these brackets come in smaller sizes, for smaller tables?
Poopops! on Jun 24, 2016
BEST ANSWER: I used them on child's table! Worked fine.
Would this be suitable for attaching 3x3 legs? Or should I try and find something bigger
haim m on May 30, 2016
BEST ANSWER: These brackets will work just fine. I also used them on 3" legs. I had no problem, they are very sturdy brackets
Are they a need to use pocket screws or other joinery to attached the apron to the legs using this? Thanks
Wayne C on Mar 16, 2016
BEST ANSWER: No.
Two screws tie the bracket to the table top.
Four screws tie the apron to the bracket.
Two wood screws to machine bolts are used to tie the legs to the bracket.
The length of the apron determines if the legs wobble or not.
The wood screws to machine bolts squeeze the legs against the apron.
If the apron is to loose the legs will not tighten up.
Does this leg have mount for hanger bolt or dado? Can it be used with these corner braces?
Hongjik K on Oct 10, 2016
Surface Mount Corner Brackets for Table Aprons
Surface Mount Corner Brackets for Table Aprons
Queen Anne Style Legs - Choose wood and apron height and overall height
Queen Anne Style Legs - Choose wood and apron height and overall height
Corner Brace Kits for Table Legs and Kitchen Island Legs
Corner Brace Kits for Table Legs and Kitchen Island Legs
BEST ANSWER: It uses pre-drilled pocket holes to mount the brace to the apron. It uses bolts to mount the leg to the brace. You could use hanger bolts to mount the leg to the brace.
How do you install the table leg brackets so that they hold the pieces together firmly? Do you put the screws along the edge of the bracket in first and then tighten the nuts of the two bolts in the center? Should there be some space between the bracket and the leg so it bends slightly and pulls the aprons into the leg tightly?
Dale C. on Oct 25, 2015
BEST ANSWER: I installed the bracket to the table aprons first, then attached the leg. Yes, I think there is some clearance between the bracket and the leg--the leg is positioned primarily by the aprons, and is just held tightly against them by the lag screws and nuts.
Could you just use some lag bolts to tighten up the legs?
samnormaniii s on Jul 26, 2016
BEST ANSWER: Yes. Provided their not to long.
The advantage of using a part that has wood threads and machine bolt threads is
the ease of removing and installing the table legs.
Wing nuts can then be used.
Table legs loosen from the humidity changes and table movement.
Wing nuts can be tightened easily, where lag bolts will require a wrench each time.
How many are in a package?
A shopper on Apr 16, 2015
BEST ANSWER: 4 in a pack. They look good, plenty heavy. and we plan on using them on our custom tables.
Distance between centers of hanger bolt holes?
Edward M on Dec 11, 2017
BEST ANSWER: Center to center dimension is 1 3/16 inches.
kerf mount corner bracket------what size mount will i need for a 3 1/2 inch post ?
david e c on Nov 16, 2016
BEST ANSWER: You should be able to use bracket shown.
To properly center the post in the corner some adjustment will be required.
Either adding a spacer to the apron or shaving the corner of the leg.
Would this be suitable for attaching 4x4 legs? Or should I try and find something bigger (suggestions welcome)?
Ryan L on Apr 25, 2016
BEST ANSWER: These will work, but the skirt will not line up with the center of the 4"X4" leg.
You may wish to had a shim to the back of the skirt on each side.
How many are in a pack or just one per pack?
Wayne C on Mar 21, 2016
BEST ANSWER: They come in packs of four
What size wood screws are needed for the table corner brackets?
Jay on Jan 18, 2016
BEST ANSWER: DEpends on thickness of the skirt board. Use a flat or binding head screw, #8 or 10
I am building a bar height oak dining table. Am wondering if I should use a mortise and tenon joint and use these to reinforce? Any thoughts?
Jesse on Jan 4, 2019
BEST ANSWER: It sounds like it would be a good reinforcement. A bar height table would put a lot of stress on the joints so any reinforcement would be beneficial.
How many brackets per pack?
Ernie on Oct 21, 2018
BEST ANSWER: 4 per pack
Are these stainless steel wanted to use for an outdoor farmhouse table?
P B on Jul 6, 2018
BEST ANSWER: I have used these corner brackets on two different tables. Easy to install and they provide strong leg-to-table support. Best, for me, is that legs can easily be removed if table needs to be taken apart for storage or transport.
If I want to use the "Surface Mount Corner Brackets for Table Aprons" (Item #: 24279) to attach these to the apron, what size hanger bolt is recommended?
Michael S on Jun 7, 2018
Surface Mount Corner Brackets for Table Aprons
Surface Mount Corner Brackets for Table Aprons
Country Table Legs-29
Country Table Legs-29" Long Leg
Steel Hanger Bolts-Steel Hanger Bolts
Steel Hanger Bolts-Steel Hanger Bolts
BEST ANSWER: The holes in the corner bracket are sized for the 1/4" or 5/16" hanger bolts
What is a complete list of screws bolts nuts etc. To install these?
Debra on Aug 3, 2017
BEST ANSWER: Hi Debra, For the table I used the brackets on I think I used 5/16x2 hanger bolts with nuts and flat washers the screws that are on the sides that go into the skirt boards #8x3/4 pan head screws, you can also use 8/x3/4 screws into the top material but be sure tour top is at least 3/4 thick or you may want to use 1/2 inch screws or clip tie tips a little. Have fun, Kurt
can i use these brackets to attach 6x6 farm table legs ?
Lorne G on Aug 2, 2017
BEST ANSWER: Should be able to fit any size legs. You may have to cut flats on leg to accept bracket for a 6x6 leg
what size do the leg need to be?
$adi0411 on Dec 22, 2016
BEST ANSWER: Depends on apron spacing, mine were 2” round
Do these brackets come in smaller sizes for shorter aprons?
Frank H on Dec 25, 2015
BEST ANSWER: This style is only available in one size. For other styles see http://www.rockler.com/kerf-mount-corner-brackets-for-table-aprons-kerf-mount
I am a beginner; using these brackets to fasten wooden legs to apron table top to make a potting bench. Legs are 3 1/2 " square at the top. What size steel hanger bolts do I need to order with this surface mounted corner bracket? Thanks! JH
Janet on Sep 17, 2015
BEST ANSWER: Janet, I always like to use the largest bolts that I can for holding the legs in place. I used 3/8" X 3 " bolts to secure the legs to these corner brackets.
ordering the no.24279 corner brackets. which hanger bolt do I need? one answer says 5/16 - 18 X 2 1/2. is this correct? John T
JOHN T on Apr 20, 2018
Need to attach vanity seat to bench frame what kind of hardware do I need?
Janice S on Dec 26, 2017
I need the bracket the table leg screws into?
Jabbo on Oct 4, 2017
How much gap should be left between the bracket and the leg?
Larry on May 4, 2017
my table legs are 1x1 what size bracket should I use?
$adi0411 on Dec 22, 2016
More Suggestions