WARNING: Cancer & Reproductive Harm - 
VIEW
36767
$24.99
Pair
Out of stock
Add to your jig and fence making capabilities with these specially designed hold downs. A slotted T-track connector head is molded into the body and allows you to secure any T-track device to your work surface to create fences, straight edges and jigs. Steel threaded shaft and large ergonomic handle make adjustment easy. Works great with the new Multi-Track (#34262 and #35605, sold separately). Aluminum body.
(1) Rockler T-Track Hold Down
| Brand | Rockler |
|---|---|
| Manufacturer Part Number | No |
| Weight | 0.6500 |
| Tech Spec |
|
| Tech Docs |
|
| Type | No |
| Size | No |
3.9 / 5.0
17 Reviews
T - track hold down
this item works great on my drill press, positioning the guides for repeated drilling.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
I may buy more.
These worked great. I used them to hold a fence in place on my old band saw so that I could do some resawing.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Helpful tool
Great..would be better if it had a quick release...
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Turn it over- here is another use.
I mounted track in my miter saw side benches and use these clamps to hold my fence in position. Easily move/remove the fence and the entire bench is available for other uses.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
My Best Use
I use these with multi track on my drill press table and on the router table They are very convenient for that use. They are sturdily built.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
T-Track Hold Down
great for my homemade jigs. tough and sturdy and will hold most of my work without slipping.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Very useful
From my drill press table and other T-track jigs, to using a pair with a separate piece of T-track as a saw guide, these very high quality cast-aluminum clamps are great. They clamp very tightly without marring the material.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Great on drill press table
Added these to the drill press table I made based on a Rockler video.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Track hold down assembly
I have a blank of aluminum that has tracks that this clamp will slide in. I can hold that track to my work surface as needed.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Well made
I would have given it a 5 if it had the ability to be used at 90 degrees to it's present position. Other than that it's another well made Rockler innovation.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions
Browse 6 questions
and 32 answers
Why did you choose this?
Rockler Store
To use with Rockler multi track as a fence.
Kathleen S
on May 24, 2018
For track saw
Bob the rebuilder
on Jun 5, 2016
To use with Rockler multi track as a fence.
Kathleen S
on May 24, 2018
My father-in-law asked me to get it for him.
I have given him other Rockler products in the past.
I have given him other Rockler products in the past.
Marie and Ed G
on Mar 3, 2017
My father-in-law asked me to get it for him.
I have given him other Rockler products in the past.
I have given him other Rockler products in the past.
Marie and Ed G
on Mar 3, 2017
To hold down straight-edge guide.
David O
on May 5, 2016
How many t-track clamps are included...one or a pair?
BEST ANSWER: There are two t-track clamps per package.
- Reply
- Inaccurate
- Robert M on Apr 26, 2015
- Purchased on Mar 11, 2015
Anyone know if these will fit in 10 series (1") 8020 extrusions? Thanks very much!
BEST ANSWER: I have purchased T- track and the pair (2) hold down to fit my drill press table fence and now I am very happy
drilling 3 Cribbage boards for Christmas gifts. I make a storage box for 2 decks of cards and game pegs hinge
the cribbage board as a lid on top. Use earth magnets to hold the lid tight to the box when not playing the game..
Hope this helps----Emil Hlas
drilling 3 Cribbage boards for Christmas gifts. I make a storage box for 2 decks of cards and game pegs hinge
the cribbage board as a lid on top. Use earth magnets to hold the lid tight to the box when not playing the game..
Hope this helps----Emil Hlas
- Reply
- Inaccurate
- Emil H on Jun 6, 2017
- Purchased on Jul 29, 2015
Will these also fit the universal T- Tracks?
BEST ANSWER: It will fit the Rockler T track, and it fits some T track from Woodpeckers (though the fit was rather tight), and it even fit some T track in my cast iron router table.
- Reply
- Inaccurate
- David A on May 5, 2017
- Purchased on Jun 18, 2015
What are the dimensions of the Rockler T-track hold downs?
BEST ANSWER: The clamp is 3 1/4" for the body of the clamp and the maximum clamp opening is 2 3/16". The overall height of the clamp when opened all the way is 6 5/8". The clamp thickness is 5/8". I hope this info answers your question.
- Reply
- Inaccurate
- Bill F on Apr 7, 2015
Will this fit the Festool saw guide slots?
BEST ANSWER: I fit mine on Rocklers tee track.
I don't know what Festol uses.
I don't know what Festol uses.
- Reply
- Inaccurate
- Gilbert N on Nov 13, 2017
- Purchased on Feb 20, 2016
Frequently Bought Together
More Suggestions