In stock
Grouped product items
Product Name Price Qty
Table Saw Hood - 12-1/4" X 12-1/4" X 2-1/2" High
Table Saw Hood - 12-1/4" X 12-1/4" X 2-1/2" High Item #: 88460
In stock
$12.99
Each
Table Saw Hood - 14" X 14" X 2-1/2" High
Table Saw Hood - 14" X 14" X 2-1/2" High Item #: 88478
In stock
$14.99
Each
Jointer Dust Hood - 8" X 8"
Jointer Dust Hood - 8" X 8" Item #: 21025
In stock
$7.99
Each

Table Saw and Jointer Hoods-Table Saw Hoods

Item #
GRP16972_1
Rating:
82% of 100

Bring dust collection to your Table Saw or Jointer! This Table Saw or Jointer Hood eliminates dust and debris from your table saw or jointer operations by directing dust collection from your tool to your collector in an easy manner. It also allows you to add dust collection capabilities to your Table Saw or Jointer.

(1) Dust Hood
More Information
Brand No
Manufacturer Part Number No
Weight 0.9300
Tech Spec
  • Table Saw Hood available in two sizes: 12-1/4" x 12-1/4" x 2-1/2" high or 14" x 14" x 2-1/2" high
  • Jointer Saw Hood available in: 8" x 8" square (fits most 6" and 8" Jointers)
Tech Docs
Size 4"
Material Plastic
Type Hood
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
4.1 / 5.0
26 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
12
9
2
2
1
Table Saw Dust Collection For Delta Contractor Table Saw
My Delta Contractor Table Saw is a 1993 unit, Model 34-444. Saw dust collected under the saw after each use, and filled the air. I found this Table Saw Hood, P/N 88460 in the Rockler Catalog for Delta Table Saws, and hoped this would solve my dust problems. This hood fit my Delta Contractor's saw perfectly. You can tilt the saw to a 45 degree angle and insert from the back of the saw. I placed Scotch Brand double sided hanging tape around the perimeter of the hood, and inserted into the opening of the table saw. The tape held the hood in place, and is very strong. A plastic cover plate was made to cover the back opening of the contractor's saw, to seal off the back of the saw

Dust Right 4" to 2-1/4" Shop Vacuum Tool Port Adapter, P/N 52906 was used to reduce the Table Saw Hood opening down to 2-1/4 inch to align with my dust collection system. Rockler 2-1/2" Swiveling Hose Adapter, P/N 31660 was used to mate with the tool port adaptor and my 2-1/2 dust collection hose.

I am very happy with the dust collection system listed above and would recommend for Delta Contractor Table Saws. I am in the process of installing a self and a cabinet with drawers below the saw to house saw blades and tools for the saw. This area was totally unusable before.
Table Saw Hood, P/N 88460, installed on Delta Contractor's Saw
Table Saw Hood, P/N 88460, installed in Delta Contractor's Saw
Table Saw Hood, P/N 88460, Vacuum Tool Port Adapter, P/N 52906 and Swiveling Hose Adapter, P/N 31660
August 14, 2018
Woodworking Experience:
Beginner
Nice to collect dust.
There was no dust chute on my jointer. The dust chute plus 4 well placed sheet metal screws worked wonders. I'm picking up dust with my dust collector instead of spewing it out on the floor.
October 13, 2017
Purchased
12 months ago
Woodworking Experience:
Advanced
replaced a smaller one I had and made all the difference
May 14, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
Perfect Application
This table saw dust hood fit my Rigid table saw perfectly and connected to my dust collection system as designed. I would recommend its use
April 5, 2017
Purchased
1 year ago
Jointer hood
Works great on my 1970s Grizzly 6" jointer.
September 7, 2016
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
Just what I needed
Fit perfect on my Craftsman table saw
April 28, 2016
Purchased
over 2 years ago
Woodworking Experience:
Advanced
sawdust collection
This added sawdust collection function to my Delta table saw when coupled to my wet/dry vac.
April 24, 2016
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
Universal dust connection
This works well. I was able to make an enclosure for my table saw with this.
March 3, 2016
Purchased
over 3 years ago
Woodworking Experience:
Intermediate
works great
used on a Delta contractor saw older style it works great
March 3, 2016
Purchased
over 3 years ago
Woodworking Experience:
Intermediate
Mounted this hood on the back...
Mounted this hood on the back of a shop made router cabinet, easy to drill mounting holes and the 4" flex hose fits well.
January 17, 2009
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions Browse 5 questions and 57 answers
Why did you choose this?
Rockler Store
I finally got tired of vacuuming underneath the table saw
Benjamin N on May 10, 2018
For table saws
AVKESQ on Mar 4, 2018
I finally got tired of vacuuming underneath the table saw
Benjamin N on May 10, 2018
This item looks like it will fit my Delta Contractor saw
Kevin M on Mar 25, 2018
For table saws
AVKESQ on Mar 4, 2018
I needed a table saw hood
Jean C on Jan 4, 2018
needed a dust collector for my table saw. it looks to be a good solution
Mark L on Dec 30, 2017
dust collection from older Delta table saw
Ed D on Dec 29, 2017
connect to dust collection
Michael D on Dec 10, 2017
Dust Collection Modification for Delta 36-725
Holly A on Nov 25, 2017
Size of table saw
Robert H on Nov 8, 2017
Replace one that broke. Connected to a 4" Rockler Elbow and hose. I guess the combined weight was too much.
Robert H on Nov 8, 2017
Dust collection for my table saw
Nathan W on Oct 25, 2017
For Table saw
Ronald S on Jul 31, 2017
Dust Collection Project
Nevin L on Jul 28, 2017
Building a hood for my miter saw
William S on Jul 11, 2017
This accessory will allow me to use my dust collector with my bench saw.
Phil M on Jul 2, 2017
I need it for my contractor table saw
Dr Buff on Jun 26, 2017
dust collection
Larry M on May 6, 2017
Only place I could find one was your store
REYNALDO P on Apr 23, 2017
I need to lower the dust level in the shop.
Stephen A on Apr 19, 2017
the right size
Larry W on Apr 11, 2017
Primary dust collection for 113 series Craftsman contractor saw
Gary L. S on Mar 2, 2017
fits my need
Warren G on Feb 20, 2017
under mount on craftsman 10" 3hp table saw
Eric K on Feb 16, 2017
Tha ones I make are too bulky
Randy P on Feb 2, 2017
I chose this to help me collect wood chips and sawdust produced by my Table Saw.
GARY K on Dec 21, 2016
Parts for new dust collection system
Joe S on Dec 6, 2016
I have a table saw and I hope this will work on it?
Freddie C on Nov 4, 2016
Used on my jointer
Frederick J on Nov 2, 2016
This item will eliminate MOST of the saw dust from under my table saw. It works very well.
B R on Oct 3, 2016
Contractor Table Saw Dust Collection
Ryan B on Aug 28, 2016
To help collect the sawdust from my table saw. Works with 90 % efficiency, of the sawdust being collected.
Robert S on Aug 8, 2016
good for dust collecting with dremel tool
lois j on Jul 27, 2016
My table saw produces 85% of the saw dust so by mounting under the saw my DustRight Collector and Dust Separator will minimize my cleanup. It is the perfect size to fit under the saw.
PATRICK M on Jul 14, 2016
Size
Rick S on Jun 13, 2016
needed for my table saw
Gary C on May 20, 2016
I needed dust collection for my jointer.
Robert P on Apr 29, 2016
my present tablesaw has no ports for dust. hoping this hood will relieve some or all of dust problem
Anthony G on Apr 19, 2016
To rig up another Table saw in my shop to the dust collection system.
Jean C on Dec 28, 2015
To fit under or table saw.
Charles H on Dec 23, 2015
I need a way to catch table saw dust
John G on Dec 2, 2015
Had it previously
Mel C on Dec 1, 2015
largest saw hood; will have to mount it to plywood apron all around under the saw.
Bruce L on Oct 29, 2015
I have an older Craftman contractor-type saw which currently has no dust control.
Gary M on Oct 14, 2015
Dust control on a contractor type saw is difficult at best. This dust hood helps contain the dust and gives me a connection for my shop vac.
Gary B on Sep 5, 2015
Allowed proper dust collection addition to my older belt drive contractor saw.
Mark S on Aug 11, 2015
by meet my needs in my hobby (joinery)
Luiz H on Jul 23, 2015
table saw
ART V on Jul 17, 2015
I liked the color
mike m on Jul 16, 2015
addition to system
Dennis N on Jul 15, 2015
Investment
Stephen O on May 14, 2015
This item looks like it will fit my Delta Contractor saw
Kevin M on Mar 25, 2018
I needed a table saw hood
Jean C on Jan 4, 2018
how does this connect to a sears table saw
John T on Mar 3, 2016
BEST ANSWER: I am using this with a Craftsman 3hp Contractor Series table saw from the 90's. Unfortunately, it is smaller than the opening on the bottom of the table saw so I had to make a smaller opening to attach it to. Dust settles around the edges on the inside of the table saw, and i'm not very happy with how it performs as is, so eventually will change it out for something that fits the larger opening. Hope this helps someone.
what is the actual inside and outside diameter of the dust port?
Steven S on Nov 17, 2016
BEST ANSWER: I hope this is what you need to know. It is 4inches for it will fit a 4 inch hose. I use the Rockler Quick dust mate product and am very happy how it all worked..
Will the 4" end fit over the 4" opening on item # 88460?
todd r on Nov 15, 2017
Table Saw and Jointer Hoods-Table Saw Hoods
Table Saw and Jointer Hoods-Table Saw Hoods
Dust Right® 4'' to 2-1/4'' Shop Vacuum Tool Port Adapter
Dust Right® 4'' to 2-1/4'' Shop Vacuum Tool Port Adapter
BEST ANSWER: Yes
Do the hood dimensions represent the overall dimensions of the hood or the size of the opening that the hood fits into? If the dimensions represent the overall size of the hood what size opening will the hood fit into?
peter l on Nov 1, 2017
BEST ANSWER: I am unable to answer your question without seeing the actual band saw.
More Suggestions