Store Locator

Triton MOF001 2-1/4 HP Dual-Mode Plunge Router

Easy to control and simple to adjust, this router is suited equally well for table-mounted or hand-held use.
Item #

Get Expert Advice

Return Policy

The Triton MOF001 is a multiple award-winning plunge router with simple, intuitive adjustments and the unique capability to perform those adjustments from above the table when table-mounted. Think of it like a router with a lift built in—once mounted, just insert the winder wrench through the top of the table for precise adjustments. To change bits, just wind it all the way up. The bit extends well above the table and even automatically locks out the collet at the end of its travel. A single wrench is all you need to loosen the collet. This same ease of use extends to handheld operation. In free plunge mode, you can quickly plunge to rough depth. Rotate the handle for finer adjustments, then rotate the microadjuster for very fine adjustments. A 3-stage turret lets you immediately access commonly used depth settings. With its compact and powerful 2-1/4 HP motor and 8000-21,000 RPM variable speed with electronic speed maintenance under load, the Triton MOF001 is up to most any routing task. Includes extended base plate with fence for routing grooves and dados, plus a unique circle-cutting feature.

  • 1/4'' and 1/2'' collets for a greater range of bit selections
  • 2-1/4 HP electronically-controlled motor for maintained speed under load
  • Automatic spindle lock engages only when power switch cover is closed
  • Soft start and variable speed for all cutter types
  • Single button switches from plunge to fixed based router with rack and pinion adjustment
  • Micro winder enables continuous fine depth adjustment through the full plunge range
  • Above the table, single wrench bit changes
  • Electronic speed control ensures a fine finish on all materials
  • Removable plunge spring for easy bit adjustment when table mounted
  • 3-stage turret with direct reading scales for precise pre-set cut depths
  • Fully enclosed guarding provides maximum protection from the cut zone and assists dust extraction
  • Multi-function fence provides optimum control for hand-held use and circle cutting
  • Quick-fit pins for fast fitment and removal from the fence and the RTA300 Router Table
  • Side air vents reduce intake of dust into the motor casing when mounted upside-down in a router table
  • Excellent dust extraction for a cleaner, safer working environment
  • Easy access brushes for quick changes
  • Through the base single-wrench bit change is achieved with the automatic spindle lock
  • Safety switch shutter locks closed in bit-change mode to prevent router being switched on

(1) Triton MOF001 1400W Dual-Mode Plunge Router
(1) 1/4" collet
(1) 1/2" collet
(1) Collet wrench
(1) Table height winder
(1) Extended base plate
(1) Multi-function fence

Rockler Protection Plan

With the Rockler Protection Plan you'll get accidental damage coverage immediately upon purchase of your tool. Plus we will extend the manufacturer's warranty for your choice of an additional 1 or 2 years. We'll take care of all parts and labor for any repairs with no deductibles and no hassles. If your tool can not be repaired we'll gladly replace it. Available in the US only. Click here to learn more.

Standard Manufacturer's Warranty: 30 days 36 months with registration

More Information
Brand Triton
Manufacturer Part Number MOF001
Weight 16.450000
Tech Spec
  • Depth Adjustment Increments: Infinite
  • Electronic Speed Maintenance: Yes
  • Guide: Yes
  • Micro Adjustment: Yes
  • Power On Indicator: Yes
  • Height: 290mm (11-7/16'')
  • Width: 285mm (11-1/4'')
  • Product Length: 165mm (6-1/2'')
  • Safety Power Switch: Yes
  • Sound Pressure LP: 84.1dB
  • Sound Power LW: 95.1dB
  • Plunge Range: 0 - 59mm (0 - 2-5/16'')
  • Speed Maintenance Under Load: 8,000 - 20,000rpm
  • Compatible with 01: DCA300
  • Compatible with 02: RTA300
  • Compatible with 03: BJA300
Speed Range 21,000 rpm
HP 2-1/4 HP