Store Locator

Triton TA1200BS 3'' Belt Sander

Everything you've come to expect in a standard 3'' x 21'' belt sander, plus the ability to turn it over and clamp it to the bench for use as a stationary sander!
Item #

As low as $209.99

In stock
$209.99   Triton TA1200BS 3'' Belt Sander (56070)



    Get Expert Advice

    Return Policy

    By moving the primary handle to the rear of the tool, Triton's engineers have created a belt sander that can be turned upside down for use as a stationary sander. The included clamps slip into a pair of openings in the housing, firmly holding the sander to the bench. This is an ideal feature for sanding small or delicate parts. The front bail handle can also be pivoted out of the way for this purpose, or pivoted vertically so you can get the nose up close to a wall when sanding wood floors, for example. One side of the sander is also flush with the belt for the ability to sand directly up against a wall. The powerful 10A motor with variable speed control promises rapid stock removal and the ability to tailor the tool to your task. Small diameter front roller improves sanding in confined areas and detail work. Side dust port connects to included dust bag or vacuum system. Includes inversion clamps, dust bag and sanding belt.

    • Powerful 1200W motor for rapid stock removal
    • Variable speed control improves versatility when working with different workpieces
    • Side dust port connects to the supplied dust bag or dust extraction system
    • Belt tracking adjustment for accurate alignment of the sanding belt
    • Lock-on button adds convenience with extended use
    • Small diameter front roller allows for sanding in confined areas
    • Power-on neon increases operator safety
    • Removable bail handle increases support & safety
    • Easy access brushes allows changing of worn brushes
    • Over-Moulded Grip for Comfort, Safety & Control as well as fatigue reduction
    • A Mabuchi RZ-735 Carbon Brush Motor for maximum efficiency
    • Belt clip to make transportation easier at job sites

    (1) Triton TA1200BS 1200W 76mm Belt Sander
    (1) Sanding belt
    (1) Dust extraction bag
    (2) Inversion clamps

    Rockler Protection Plan

    With the Rockler Protection Plan you'll get accidental damage coverage immediately upon purchase of your tool. Plus we will extend the manufacturer's warranty for your choice of an additional 1 or 2 years. We'll take care of all parts and labor for any repairs with no deductibles and no hassles. If your tool can not be repaired we'll gladly replace it. Available in the US only. Click here to learn more.

    Standard Manufacturer's Warranty: 30 days 36 months with registration

    More Information
    Brand Triton
    Manufacturer Part Number TA1200BS
    Tech Spec
    • Material - Primary Construction: Rubber over-moulded plastic and aluminium
    • No Load Speed: 656-1475 ft/min
    • Power: 1200W/1.6 HP
    • Power On Indicator: Neon
    • Product Height: 145mm (5-3/4")
    • Product Length: 410mm (16-1/8")
    • Product Width: 120mm (4-3/4")
    • Product Weight: 4.8kg (10.5 lbs)
    • Safety Power Switch: Lock-On button
    • Sanding Area: 76 x 150mm (3" x 6")
    • Sanding Belt Size: 76 x 533mm (3" x 21")
    • Sound Pressure LP: 101dB
    • Sound Power LW: 90dB
    • Finish: Brushed aluminum
    • Compatible with 01: TBSIS
    • Compatible with 02: TASB40G
    • Compatible with 03: TASB60G
    • Belt Adjustment: Yes
    • Dust Extraction: Yes
    • Power Lock On: Yes
    • Suitable For Inversion: Yes
    • Variable Speed: Yes
    • Gear Casing: Cast Aluminium
    Belt Size 3" x 21"
    Sander Style Hand Held
    Speed 656-1475 ft/min No Load
    Dust Collection Dust Port
    Cord/Cordless Corded