Triton WorkCentre Package with Router Table, Contractor Saw and Project Saw with Free Accessories

Short on space? No problem. The TWX7 WorkCentre from Triton lets you make the most of what you have by packing maximum functionality into minimum space. Designed with multi-functionality in mind, this package comes standard with an MDF clamping table insert with a grid of forty 20mm dog holes. This is easily lifted out and replaced with any of three included power tool inserts: the Router Table Module, Contractor Saw Module and Project Saw Module. A heavy-duty switch with a large stop button is pre-installed on the table to accept power cords from your router or saw. The legs of the WorkCentre fold up for easy transport to the jobsite, or for convenient storage beneath the workbench in your shop. It can also be used in the folded form as a benchtop unit or off the tailgate of your truck. In addition, two casters on the legs let you effortlessly roll the entire unit around your shop or on smooth surfaces at the jobsite. Dual T-track rails accept accessories.

Router Table Module:

The precision Router Table Module TWX7RT001 features an extruded aluminum main fence with two adjustable sub-fences, and rear-mounted micro-adjusters. The table includes four featherboards, a dust port, bit guard, insert rings, guide pin, and a cleverly designed set of cruciform fence spacers for jointing. Micro-adjusters and integral scales let you adjust the fence with extreme precision, while the dust port and bit guard work in tandem to reduce airborne dust. The router table accepts all three Triton plunge routers (TRA001, MOF001 and JOF001) without modification, and these routers mount quickly and easily with the innovative bayonet mount.

Contractor Saw Module:

The TWX7CS001 Contractor Saw Module features a powerful 15A motor and a 10'' precision carbide-tipped blade. A large handwheel lets you adjust the blade height from zero to 3-3/8'', and the bevel angle from 0-45° for bevels, chamfers and compound miters. The rip fence is secured quickly with the cam levers, and folds up for compact storage when not in use. A miter gauge is also included for use in the dual miter tracks of the WorkCentre table. Last but not least, two dust ports come standard—one on top in the blade guard, the other below the table surface. An optional Outfeed Support (#54905, sold separately) and Side Support (#50280, sold separately) are available for use with larger panels and sheet goods. Includes push stick.

Project Saw Module:

The Triton WX7PS001 Project Saw is ideal for flooring projects. Thanks to its portable design and integral carry handle, you can bring it into small rooms, meaning you won't have to walk back and forth to a table saw outside. Though perhaps most well-suited for composite wood flooring such as laminates and engineered hardwood floors, the Project Saw is capable of crosscutting and ripping material up to 3/4'' thick, meaning it will work with solid wood flooring as well. To crosscut, butt the material against the fence, tighten the clamp and pull the saw through the workpiece as with a sliding miter saw. To rip, use the tool-free knobs to move the fence so that it's parallel to the blade, lock the motor carriage in place, then feed material through as on a table saw. The saw can be used on the floor, a bench, or installed in the Triton TWX7 WorkCentre. Laser cut line for easy alignment. Multi-function protractor fence for miters, rips and right angle cuts.