VIEW
34487
$12.99
Each
In stock
A tapered replacement pilot bit for the exceptionally clean-cutting #6 Pro Tapered Countersink (#33141, sold separately). This 9/64" tapered pilot bit features a flattened shank for a no-slip connection to the countersink.
(1) #6 Replacement Pro Tapered Pilot Bit
| Manufacturer Part Number | TACB-06-B |
|---|---|
| Weight | 0.0300 |
| Bit Size | #6 |
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.govWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
4.3 / 5.0
9 Reviews
First replacement, holding up well, cutting clean.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Great replacement for broken bit.
Great replacement for broken bit.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
A MUST HAVE BIT
I have used mine in most of the drilling I do. I know it is a drill bit no ment for the use it did with it in metal. I would grab it first then go bigger, it would start most of the time without a center punch used.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Great product - Keep a spare bit handy
Tapered bits are great!
I have made quite extensive use of my tapered pilot bet/countersink set. IMHO, if you use it enough, you will eventually break the point off the bit. With a broken tip, the tapered bit is pretty much kaput. It is a specialty item and hard to find anywhere except at Rockler. Having a spare bit will save the day!
I have made quite extensive use of my tapered pilot bet/countersink set. IMHO, if you use it enough, you will eventually break the point off the bit. With a broken tip, the tapered bit is pretty much kaput. It is a specialty item and hard to find anywhere except at Rockler. Having a spare bit will save the day!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Tapered drill
It fits and works as expected.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions
Browse 2 questions
and 20 answers
Why did you choose this?
Rockler Store
This works great not only in a countersink bit, but also work great to drill holes when attaching kitchen cabinets together after countersinking since the countersink bit is typically not deep enough.
Larry W
on Sep 12, 2019
broke off another bit. this makes 3 so far. this is a great counter sink and I use it a lot but...
Jack K
on Jun 4, 2018
This works great not only in a countersink bit, but also work great to drill holes when attaching kitchen cabinets together after countersinking since the countersink bit is typically not deep enough.
Larry W
on Sep 12, 2019
Other one broke
JONATHAN M
on Dec 29, 2018
Other one broke
JONATHAN M
on Dec 29, 2018
I broke my old one. My fault, not the bit's...
Mike H
on Apr 22, 2018
what sized screw is the #6 bit for?
Frequently Bought Together
More Suggestions