$19.99 Pair
In stock

Drop Leaf Support for tables without aprons

Item #
29652
Rating:
80% of 100
Drop Leaf Support for tables without aprons
Drop Leaf Support for tables without aprons
Frequently bought together
  1. Drop Leaf Support for tables without aprons
  2. +
  3. Butt joint hinges are yellow zinc plated
Total price: $0.00

Drop leaf support for tables without aprons. Perfect for tables with a large overhang, the 2-1/4" high mounting bracket on this specialty drop leaf support doubles as an instant apron.

(2) Drop Leaf Support for tables without aprons
More Information
Brand Rockler
Weight 1.0500
Tech Spec
  • Made of steel with a brass finish
  • Size: 12''
Technical Documents
Hardware Type Supports
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
4.0 / 5.0
12 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
3
1
1
1
Just what I needed
They worked beautifully as designed. Very easy to install and adjust. The instructions were straight forward. The mechanism is solid.
April 2, 2018
Purchased
9 months ago
Woodworking Experience:
Beginner
Worked perfect
February 28, 2018
Purchased
10 months ago
Drop leaf supports
Easy to install and rock solid
May 22, 2015
Purchased
over 3 years ago
Woodworking Experience:
Advanced
They are installed on the table...
They are installed on the table and doing a fantastic job. You were the only place I could find this product. Your prices are reasonable also.I bought them too big, didn't realize there were different sizes. If you could put some description for the lay person that would be great.
March 15, 2011
My Mother-in-law had been asking for...
My Mother-in-law had been asking for years about repairing her drop leaf table. She was thrilled when I had these hinges installed in less than 20 minutes.
April 29, 2009
The hinge was just what I...
The hinge was just what I needed to finish my daughter's drop leaf desk area. Thanks so much for a quick delivery and a good product!
January 31, 2008
Converted a round table into 2 drop leaves
4 stars only because I thought these would be a little more sturdy, definitely do not put your weight on the leaf to get up from the table! Otherwise they were fairly easy to install but I did need to download the datasheet since this was my first time making a drop leaf. Leveling the leaf is really the hardest part of the whole installation (excluding the planning for the cuts on the table). I would use these again.
User submitted image
User submitted image
I had to remove the decorative trim and cut  notches with a hand saw for the leaf to drop into.
I cut 2 leaves opposite the main  pedestal with a circle saw
June 22, 2016
Woodworking Experience:
Intermediate
Drop leaf hinges
These drop leaf hinges were perfect for my application and hold the weight of the leaf and a person leaning on it with no issue. Only problem is even pre drilling the holes to mount the hinges the screw heads snapped off . Stronger screws are required
March 28, 2016
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
Drop Leaf Support for tables without aprons
Worked great. Just what I needed.
December 22, 2015
Purchased
over 3 years ago
Woodworking Experience:
Intermediate
These supports are for a table...
These supports are for a table without aprons. I liked the fact that the supports would snap into place when the leaf was lifted. Installed easily but found them too flimsy for the intended job. Used two 12 inch supports on 16 by 58 inch leaf but angle too shallow and mounting bracket not sturdy enough. Too much movement when 15 to 20 pounds weight on leaf. I suspect that they would be fine for lighter weight and the apron version would make a better bracket.
March 10, 2013
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 10 answers
Why did you choose this?
Rockler Store
need to replace old hardware
Tom A on May 5, 2018
WALL-MOUNTED DROP-LEAF WORK TABLE, WITH PIANO HINGE FOR LEVEL CONTINUITY WITH WALL MOUNT SHELF
Brad S on Mar 10, 2018
need to replace old hardware
Tom A on May 5, 2018
Needed for a drop leaf wall mounted table.
Tammy K on Mar 30, 2018
WALL-MOUNTED DROP-LEAF WORK TABLE, WITH PIANO HINGE FOR LEVEL CONTINUITY WITH WALL MOUNT SHELF
Brad S on Mar 10, 2018
Looking for something to support a fairly heavy drop leaf
Joe V on May 23, 2017
For drop down wall mounted desk
THOMAS G on Dec 11, 2015
I needed this to complete a project.
Stanley S on Jul 22, 2015
I needed to repair my table and this was a perfect fit.
Richard S on Jun 30, 2015
Needed for a drop leaf wall mounted table.
Tammy K on Mar 30, 2018
Looking for something to support a fairly heavy drop leaf
Joe V on May 23, 2017
My drop leaf table has legs (at 70 degree angle) under the leaf not the table top. Consequently the drop is at the hinge joint not at the end of the leaf. Will this "drop leaf support for tables without aprons" work to hold the hinged joint at 180 degrees without sagging?
Carol G on Aug 12, 2016
BEST ANSWER: I would think it would unless the leaf is greater than 24 inches. you have to look at the length that it has to hold up.
I'm debating between these and the metal drop lead supports. These looks like they support more poundage, but it doesn't say. Can anyone tell me the poundage per support they hold?
Anna-Marie P on Apr 30, 2016
BEST ANSWER: They are pretty strong and can hold a couple hundred pounds.
My drop leaf table has legs (at 70 degree angle) under the leaf not the table top. Consequently the drop is at the hinge joint not at the end of the leaf. Will this "drop leaf support for tables without aprons" work to hold the hinged joint at 180 degrees without sagging?
Carol G on Aug 12, 2016
More Suggestions