Dust Port for Drill Press Fence
This dust port fitting is designed with a very slim profile that minimizes interference with the drill press column. It allows the fence to get as close as possible to the column, meaning you can enjoy up to 3'' more of the total throat depth of your drill press when compared with using a typical dust port. The port is also angled upwards so that the hose does not catch on the table edge and obstruct movement of the fence along the table top. The hole pattern is the same as our older drill press fence dust port, so users of the older model can upgrade without need for modifications. It is also an identical replacement for the one included with our Drill Press Fence (#53648, sold separately).
1 month ago
2 months ago
3 months ago
Why couldn't Rockler just use a "real" website for shopping and provide options for shipping, such as UPS Air, UPS Ground, USPS, etc. ? PATHETIC.
4 months ago
1 year ago
7 months ago
It works great on my drill press fence
8 months ago
10 months ago
1 year ago
I attached it at the center of my home mad fence. I designed it so that I could raise and lower from flat on table to the top of the fence (3 1/2") it to accommodate the thickness of the material that I will be drilling .
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.