VIEW
57664
$149.99
Each
In stock
Gentle downward air flow draws most of the dust away from your workpiece and out of the air. It's sides and back can be raised to assist in containing dust, or lowered/removed to accommodate larger workpieces.
Orbital sanders stir up lots of fine dust, which tends to stay afloat and eventually settle on everything in your shop. That's where the Rockler Downdraft Table can be a huge windfall for the air quality in your shop. It generates just enough downward airflow to get the dust to drop down into the table and out the chute to your dust collector. Its sides and back can be raised to assist in containing dust, or lowered/removed to accommodate larger workpieces. Internal baffles efficiently direct dust toward the 4'' port. When not in use, the unit can be easily hung on the wall of your shop using the keyhole slots. The panels are removable and tuck neatly inside the unit during storage.
Features:
- Its sides and back can be raised to assist in containing dust, or lowered/removed to accommodate larger workpieces.
- Grid of rubber grommets supports your work without risk of marring
- Orange stops fit into the grommets to hold your work in place while sanding
- 16-1/2'' x 20'' working area with sides/back raised—lower or remove the sides and back for larger workpieces
- 4'' dust port allows easy connection to your dust collector (sold separately, minimum 650 CFM recommended)
- Sturdy metal construction with a durable powder-coat finish
- Carrying handles for easy transport
- Adjustable rubber feet provide a firm footing
(1) Dust Right® Downdraft Table
(6) Orange material Stops
(6) Orange material Stops
| Brand | Dust Right |
|---|---|
| Weight | 23.7000 |
| Tech Spec |
|
| Technical Documents | Instruction manual for the Dust Right® Downdraft Table |
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.govWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
5.0 / 5.0
4 Reviews
No wood lung
Great for keeping fine wood dust out of your lungs, nose ,and throat. No more "shop cough".
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Works great!
Does a good job. Easy to set up and to store.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Very nice, works well
I was going to build my own - but this one is much nicer and portable.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Nice Unit
This is a very sturdily constructed item with an excellent finish that should hold up for a long time. I have used it a fair amount for sanding 5-part cabinet door pieces and it really does a good job of reducing dust in the surrounding area and air. There's not even noticeable accumulation on the table it sits on. My only quibble is the fairly high price and the fact that the 4-inch Quick Change Handle doesn't fit very snuggly on the dust port (see my question above). As for the orange stops, they seemed like a good idea, but unless you are working on numerous pieces that are the same size, I think it would get tedious moving them all the time. I haven't used them at all and just hold whatever I'm sanding by hand. They would be more utile if they just fit snuggly in the holes and you could just push/pull to move them instead of having to flip each top section and then attaching a nut to each on the back. For these reasons, I wouldn't rate it a full 5, but it does what it's supposed to do (reduce dust) well and that's the most important thing.
- Was this review helpful? Yes (11) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (11) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions
Browse 6 questions
and 12 answers
Why did you choose this?
Rockler Store
Good reviews - Now I can do some sanding in the garage at night.
Paul Y W
on Aug 24, 2019
Price
Jeffrey B
on Jul 8, 2019
Good reviews - Now I can do some sanding in the garage at night.
Paul Y W
on Aug 24, 2019
To keep the work area cleaner.
Thomas F
on Jul 15, 2019
To keep the work area cleaner.
Thomas F
on Jul 15, 2019
because of its designed function.
JohnMichael B
on Apr 16, 2019
Will it work with a shop vac?
BEST ANSWER: I have not tried it yet. Don’t know
- Reply
- Inaccurate
- Charles F on Jun 3, 2018
- Purchased on May 13, 2018
Has anyone used this with a shop vac? If so, how well did it work?
BEST ANSWER: I bought this unit and accessories to use with my shop vac. After making all the connections and setting up to use, I found that the sander and vac noise was incredible even with ear protectors. The metal box seemed to increase the noise. Additionally the depth of box on my work surface require a step stool addition to get to a comfortable working height. Then I found that the rubber spacers left marks on my finished surfaces and I could quite figure out how to use the pegs to stabilize my pieces. So I am considering a return.
- Reply
- Inaccurate
- Margaret-Ann R on Mar 1, 2019
- Purchased on Jun 30, 2018
How big are the inlet holes?
BEST ANSWER: Larger holes are about 1"
the smaller holes are about 1/2"
the smaller holes are about 1/2"
- Reply
- Inaccurate
- Rick H Staff on Jun 26, 2018
The Quick Change Handle is somewhat loose when attached directly to the table. In the 2nd picture above in the product description, the quick change handle is shown attached to a fitting which is clamped to the outflow port. Which fitting is shown? I'd like to solidify the connection to make sure all suction is going through the table.
Dust Right® Downdraft Table
What’s the noise level compared to a shop vac?
Frequently Bought Together
More Suggestions