You'll get faster feed rates plus absolute splinter control- even on Oak/Birch ply veneers and melamine! Gives you refined cuts every time. The double hard C4 carbide teeth and high angle alternate tooth bevel (HiATB) design of the Forrest Duraline blade give you extra-clean cuts in melamine, hard and soft wood, and veneered plywood.
(1) Forrest 10" x 80 Tooth Duraline Melamine and Plywood Saw Blade
| Brand | Forrest |
|---|---|
| Manufacturer Part Number | D10807H125 |
| Weight | 2.1500 |
| Tech Spec |
|
| Kerf Width | 0.125" |
| Saw Blade Diameter | 10" |
| Material Cutting | Hardwood, Melamine, Plywood, Softwood, Veneered Plywood |
| Number of Teeth | 80 |
5.0 / 5.0
7 Reviews
I use lots of plywood and my 12 year Woodworker 2 blade was getting dull. I wanted to get a blade that is designed for cutting plywood. The blade is very sharp so I have to be careful when mounting this blade. It cuts plywood like it was butter.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
10"80T
What can I say this time. I know, same as always, "You get what you pay for". EXCELLENT BLADE! If you need to sand after a cut from this blade you need to adjust your saw, buy a new saw or quit working in wood. I get precise cuts within +=.001" every time. the 10"60T is more affordable for most or average task. Forrest puts out one of the most dependable products in woodworking. if you can't afford this, go buy an off brand 3pack on sale. this blade WILL outlast 2 3packs if used correctly. in center of picture was done with 10"80T
Forrest 10"80T is EXCELLENT! no sanding needed. Forrest Dependability!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Meet nice
Very smooth cuts in 3/4 ply, melted through it like butter, little to now sanding needed
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Best blade ever used for cutting plywood
Use it on expensive plywood - cherry and maple - and provides clean cuts without any tape...
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
I purchased this blade to use...
I purchased this blade to use for building projects from oak veneer 3/4 plywood, it does a excellent job of cross cutting and ripping with no tear out, buy this blade and you won't be sorry.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
March 25, 2008
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Why did you choose this?
Rockler Store
I am looking to get the cleanest cut I can on Baltic birch plywood for finer furniture projects.
Jim C
on Sep 14, 2019
same reason
Dennis G
on Apr 5, 2017
I am looking to get the cleanest cut I can on Baltic birch plywood for finer furniture projects.
Jim C
on Sep 14, 2019
its the best
Steve N
on Feb 19, 2018
Related Products
More Suggestions
