Easily cut or miter our flexible retainer with a knife or scissors.
(1) Groove-Type Plastic Panel Retainer
| Weight | 1.0000 |
|---|---|
| Tech Spec |
|
| Hardware Type | Retainer Clips |
5.0 / 5.0
3 Reviews
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Perfect solution!
This product is exactly what I needed! The old retainer in the doors of my China closet was cracking and falling out. I was not sure what to buy until I saw this. It was very easy to use, and the color matches perfectly! I am extremely pleased.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Plastic Retainer for glass in cabinets
Continues to provide what it is meant for!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions
Browse 5 questions
and 16 answers
Why did you choose this?
Rockler Store
Need it to retain glass for grandfather clocks
Kenneth Z
on May 20, 2018
I have a walnut china closet / hutch that needs new supports for the glass in the doors. The plastic that holds the glass in has dried in spots and is falling out, making the doors rattle.
Wanda T
on Jan 18, 2018
Need it to retain glass for grandfather clocks
Kenneth Z
on May 20, 2018
to be used on a grandfather clock
Gary H
on Feb 25, 2018
Panel retainer groove type requires 1/8" kerf. How deep of a groove? How far inset from side of frame member (stile or rail)?Recommended router bit?
BEST ANSWER: A 1/8in wide x 1/4in deep groove is required to accept the extrusion. Groove should be almost flush (< 1/32") to the edge of the glass panel.
- Reply
- Inaccurate
- Dan on Aug 29, 2015
- Purchased on Jan 19, 2015
how does the strip place into grove? Nail, staple, or glue?
BEST ANSWER: The bottom portion of the strip has barbs on it. They are designed so it is easy to push into the saw kerf you cut and holds firmly in place by friction. You can pull the strip out if needed without to much effort. It's important to use a saw blade with the recommended size kerf.
- Reply
- Inaccurate
- Ronald S on Jan 4, 2016
- Purchased on Mar 4, 2015
Which of the two colors for the plastic is the lighter in brown value? Fruitwood or Walnut?
BEST ANSWER: Fruitwood is lighter in color.
I used walnut as the wood I made the doors with was.....walnut!
This stuff is placed in back of panels against glass/mirror, etc and in my case never shows
I used walnut as the wood I made the doors with was.....walnut!
This stuff is placed in back of panels against glass/mirror, etc and in my case never shows
- Reply
- Inaccurate
- Laurence S on Aug 30, 2015
- Purchased on Feb 13, 2015
I have cut the 1/8" kerf using a 1/8" router bit. Finding it not so easy to push the molding into this groove. Any suggestions?
BEST ANSWER: I use paste wax . You are correct it is not easy !
- Reply
- Inaccurate
- Bailey M on Mar 28, 2016
- Purchased on Feb 18, 2015
Does it come in white?
BEST ANSWER: These retainer strips are available in walnut and fruitwood only.
- Reply
- Inaccurate
- David Staff on Apr 3, 2018
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.govWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Related Products
More Suggestions
