$0.00 Square Foot
In stock

A great decorative enhancement for entertainment centers, wine cabinets and racks, curio and china cabinets and kitchen dividers and cabinets.

Size & Quantity:
Width (in) Height (in) Qty Subtotal
$0.00
Add Another Size

Hand Woven Brass Grille

Item #
MCONFIG2494
Rating:
86% of 100

Only from Rockler Woodworking and Hardware - hand woven brass grille in widths up to 24'' and in any length you need! A great decorative enhancement for entertainment centers, wine cabinets and racks, curio and china cabinets and kitchen dividers and cabinets. May be used with or without glass panels.


Note:Because all woven wire grilles are made to order, returns are not accepted. Please allow 2 weeks for delivery.When your grille arrives, it may seem somewhat large. Just squeeze the grille vertically (with the length) to conform to the size you need.


Size restrictions:The Post Office and UPS will only ship grilles measuring 100'' in length and girth combined. Grilles exceeding these sizes are available, but they must be shipped by truck (an additional freight charge must be paid on delivery. If you need larger grille, please contact us for information.

(1) Hand Woven Brass Grille
More Information
Weight 1.0000
Tech Spec
  • #29827 Round Wire - 3/4'' mesh
  • #29835 Round Wire - 1'' mesh
  • #29843 Round Wire - 1-1/2'' mesh
  • #29850 Flat Wire - 1'' mesh
  • #29868 Flat Wire - 1-1/2'' mesh
Max Height (inches) 84
Max Width (inches) 24
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
4.3 / 5.0
12 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
9
1
0
0
2
Good product. can be adjusted to fit.
Can be adjusted to fit. Suggestions is to measure carefully and
decide what size diamond or square you want. I found the smaller diamond to give more color contrast and conceal what
is in the cabinets. '

l '' diamond screen allows for better view of items in the Cabinet such as sports memorabilia etc.......
January 9, 2017
Purchased
over 4 years ago
Wonderful product.
I have used this grille to face most of the radiator covers in my house. It's just gorgeous, easy to work with, amazing quality and just brings and elegance to any application you use it for.
October 29, 2015
Purchased
over 4 years ago
Woodworking Experience:
Advanced
Gorgeous, easy-to-work with, great customer service
So I ordered 6" square samples (in the polished brass) of the 3/4" size and the 1" size. I'd never worked with metal grille, or rather, flexible grille (just rad covers), so it was interesting to compress / open it up. I realized for my purposes (the open panel in cabinet doors -- the cabinets are on either side of our master bed fireplace, and one side houses all the AV equipment, so I both wanted it to literally breathe but also visually breathe [knew a solid door would feel too heavy]) the 1" would be fine. It was sent so securely sandwiched in between solid chipboard and then wrapped in shrink wrap (to keep all the little brass pieces [up in the corners] from wiggling free -- a few did as I was placing them but I just maneuvered them back in). I have to say I loved working with it, squeezing and then releasing to get it to fit perfectly in the openings (which had been cut with little channels for glass, I suppose). I think it's beautiful and looks much, much more expensive than it was (Rocker's prices are a steal). I wish I could attach a pic, but for this first-time user it was an easy, gorgeous project.
May 16, 2015
Purchased
over 4 years ago
The order arrived quickly and the...
The order arrived quickly and the size was perfect. I used the grille to replace the glass panels in our new home entertainment console to prevent heat build-up. I used the darkening agent to give the grille an antiqued look. Since my dadoes for the glass panel that the grille replaced were deep, I used some glass plate mounting points to secure the grille in the dadoes. This worked well and are nearly invisible. A lot less work than making strips of wood and staining them.
July 6, 2011
We had an entertainment center with...
We had an entertainment center with a nice glass front but the electronics inside were overheating even with a fan. The brass grille from Rockler was the answer, not only does the ventilation allow the equipment to run ok, it looks great also. The item was cut perfectly to size and arrived in about a week. I did have to cut and stain some wood strips to retain the grill on the inside but turned out great.
May 24, 2011
Needed your product to dress up...
Needed your product to dress up entertainment center. The brass grille dresses up the unit beautifully. You stated 2-3 weeks delivery, it arrived in less than one week.
April 9, 2009
I order this grille to replace...
I order this grille to replace a plexiglas in a component cover in a motorhome. They cut it correctly and shipped promptly. The material was top quality and worked and looked great.
February 22, 2009
My second installation of a built...
My second installation of a built in Wine Cellar with a smoked Glass Door. The brass mesh behind the glass adds a perfect professional touch to the set up as compared to just the plain glass opening. Great Product sent quickly and to exactly the correct size.
September 15, 2008
Very fast service for a special...
Very fast service for a special order.
March 22, 2008
Excellent quality; good gauge wire. Comes...
Excellent quality; good gauge wire. Comes unframed, needs to to be stabilized,; installed with wire stapler which gave excellent rigidity. Very bright brass, do consider darking solution offered for product.Editor's note: This grill is unlacquered, so it will also darken naturally over the course of time if left as it comes.
December 15, 2007
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 9 questions Browse 9 questions and 24 answers
How much does it need to extend beyond the opening for support? Also, can it be painted? If so, what kind of painting is recommended?
Thanks
Blanca O on Mar 27, 2017
How thick is round wire?
Faye P on Sep 19, 2015
BEST ANSWER: IT is about 1/16 indiameter and is fairly ridged.
For item 29843, is the brass polished or antique or other?
DANIEL K on Feb 20, 2018
can the hand woven grills (29868) be trimmed to fit opening?
David M on Dec 25, 2015
BEST ANSWER: Yes, I trimmed to fit. Good product, packaging/shipping and delivery timing was excellent.

The product design provides some flex in fitting. My suggestion is order to FIT--not larger and plan to trim
is it heat retardent? Want to use for a decorative heat vent cover.
Rose T on Jan 8, 2017
BEST ANSWER: Rose, good question, but I don't think you have anything to worry about. It's heat resistant as far as brass goes. The temperature of the heat coming out of your furnace isn't remotely close to the temperature required to any damage to the brass. If that is your concern. However it may experience a tiny bit of expansion, but again, little concern here as the brass is woven and free to move as necessary. I was very happy with my purchase, I used it to replace glass in an entertainment cabinet and was very happy with it. Hope this helps! Dave Easterday
If the grill is squeezed to adjust overall size, am I correct in assuming the grid pattern will change (i.e. squares will become diamond shaped)?
Adalisa F on Sep 2, 2016
BEST ANSWER: Well, if you don't cut it to size then sure, the proportions change. We had ours cut to size and when I went to install them I did first squeeze to get them into the channel, changing the shape. But once the width was in its channel the height adjusted and the shape returned to the original. Good luck!
How thick is the flat wire?
Danny E on Nov 7, 2017
BEST ANSWER: Wire itself is probably 1/16" diameter. With the bends necessary to make the grill, the entire assembly may be twice that as the wires overlap at the intersections.
does the grille come with the wooden frame?
Rose T on Jan 21, 2017
BEST ANSWER: Does not come in a wooden frame. It is quite rigid and easily mounts in the frame you provide yourself.
What are the dimensions of the openings in the mesh? We would like to use this in place of wooden lattice as a wine rack.
Abigail W on Apr 20, 2018
BEST ANSWER: There are 3 sizes. 3/4", 1" and 1 1/2". You an adjust the length and width by pulling or pushing the corners to a certain extent. The holes end up being parallelograms instead of squares when you do this.
More Suggestions