Special Price $69.99 Each Regular Price $89.99 Each
Oversold Until 10/26/2018
A precise fit with the miter slot means virtually zero slop and the cleanest, most accurate cuts possible.

Incra® Miter V120 Gauge

Item #
26537
Rating:
88% of 100

Enjoy absolute accuracy and tight-fitting, low-friction operation with this premium miter gauge. Laser-cut AngleLOCK stops in 1° increments from +/- 60° (plus special stops at +/- 22.5°) give you ultra-fine precision across the board, while a GlideLOCK miter bar adjusts for a no-slop fit in any standard miter slot. The V120 offers the precision of far more expensive miter gauges without the high price-point. Designed for smooth, slop-free use on a wide variety of tools, it includes a removable T-clip to ensure compatibility with any tool with a standard, or near standard, 3/4" x 3/8" miter slot (many older or smaller tools have miter channels without the "T-slot"). Features all steel machined and laser cut components.

(1) Incra® Miter V120 Gauge
More Information
Brand Incra
Manufacturer Part Number V120
Weight 2.7000
Tech Spec N/A
Tech Docs
Prop 65 WarningWARNING: Cancer and Reproductive Harm. For more information go to www.P65warnings.ca.gov
Prop 65 Warning WARNINGDrilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. www.P65Warnings.ca.gov/wood.
4.4 / 5.0
71 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
47
13
5
3
3
Good upgrade
I have a 3hp SawStop. I recently read reviews on different saws gauge and was surprised my saw’s original wasn’t rated top of the line, as I would expect from the saw. I did some experimenting and decided to upgrade. I have the large Incra and really like it, but for little things it is a bit cumbersome. This one, once I fit it to my grooves is dead accurate, with positive stops. It will be nice when the large one is too much.
September 10, 2018
Purchased
1 month ago
Woodworking Experience:
Intermediate
Incra
As always Incra is a very good product. It works a lot better than the taht came with my table saw
August 25, 2018
Purchased
1 year ago
Right tool, right price
Needed the accuracy on my table saw, also had a budget. This miter gauge may be inexpensive, but it's not cheap. Tme manufacture was substancial, the accuracy is fabulous.
July 29, 2018
Woodworking Experience:
Intermediate
great deal for the price
I have used this unit on other projects and just bought another. I attach my custom rails based on different needs on my PM2000 table saw. I have found the one degree settings to be as accurate as I could measure. 45 and 22.5 degree frame cuts match perfectly. Highly recommended.
July 17, 2018
Purchased
2 months ago
Woodworking Experience:
Advanced
Excellent!
Does the job!
July 3, 2018
Purchased
3 months ago
Woodworking Experience:
Intermediate
Best for the money
This miter gauge is very easy to setup for accuracy and easy to make good accurate miter cuts. Strong and well made.
June 2, 2018
Purchased
4 months ago
Woodworking Experience:
Advanced
Great replacement!
Super replacement for my old and wobbly Craftsman.
April 28, 2018
Purchased
1 year ago
Woodworking Experience:
Intermediate
Top Quality
An impressive miter gauge. Very heavy duty and precise.
November 18, 2017
Purchased
10 months ago
Woodworking Experience:
Intermediate
Great
Wonderful to be able to adjust it to fit the miter slot perfectly and being able to adjust the head if it gets out of square.
October 30, 2017
Purchased
11 months ago
Woodworking Experience:
Intermediate
Best miter I've used. Accurate each time you change angles. Highly recommend to anyone.
October 24, 2017
Purchased
11 months ago
Woodworking Experience:
Advanced
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 10 questions Browse 10 questions and 64 answers
Why did you choose this?
Rockler Store
critical equipment for accurate cut of angles with adjoining pieces.
Spotswood M on Aug 20, 2018
I know incra makes good products plus you can adjust it to fit the slot.
Gerald H on Jul 21, 2018
critical equipment for accurate cut of angles with adjoining pieces.
Spotswood M on Aug 20, 2018
For use with my recently purchased router table.
John H on Jul 31, 2018
I know incra makes good products plus you can adjust it to fit the slot.
Gerald H on Jul 21, 2018
Need an accurate miter gauge
James C on Jul 20, 2018
Husband wanted , bday present
Angela H on Jul 15, 2018
need a new miter gauge
Vito P on Jul 6, 2018
on sale, good reviews
RON S on Jul 6, 2018
Good reviews and a sound basic miter bar.
Hugh S on Jun 29, 2018
I needed an upgrade and this gauge had great reviews for a reasonable price.
Arthur M on Jun 18, 2018
old one worn out
Eber R. C on May 23, 2018
Needed a replacement gauge and Incra has quality
Ralph S on May 12, 2018
never had one for this table saw.
Robert H on May 5, 2018
1 degree settings improve angle cuts
Hal L. W on May 4, 2018
Husband wanted to do our cabinets in kitchen and other projects around the house
Lisa T on Apr 1, 2018
I need it to fit my Rockler Router table. None of the others I have fit that table.
Daniel F on Mar 12, 2018
Great price compared to other retailers
Horace W on Oct 27, 2017
It one of the best made. I have an Incra router table and i love it. I also have an Incra table saw fence which works great.
John P on Oct 7, 2017
replacement for stock miter
THEODORE B on Sep 10, 2017
more stops for unusual angles. adjustable width to remove slop.
Roy H on Aug 26, 2017
Building a new router table
Monty W on Jul 30, 2017
Fits my needs perfectly.
George C on Jul 27, 2017
The Incra V120 miter gauge has positive stops at every degree. I have enjoyed using the Incra V27 for many years. While I love it, some jigs I am making require different angles than it offers. To keep the jigs as accurate as possible, I chose this miter gauge. I see using both miter gauges throughout my woodworking days, as they both have plenty to offer. The V27 for its simple elegance and fabulous repeatability, and now the V120 for those special needs projects.
John E on Jul 17, 2017
Reliable Incra quality and features.
Raymond B on Jul 8, 2017
My Delta miter gauge broke and I needed a replacement. I chose the Incra V120 for its stops every degree
sam o on Jun 25, 2017
I lost mine,
paul t on Jun 3, 2017
Seems to be a better item then the one that I got with my table saw
Jim M on Apr 24, 2017
I wanted to replace the miter gauge that came with my Craftsman 10-inch table saw (circa 1980).
Paul S on Apr 15, 2017
I like the single degree graduations.
Delmer F on Mar 24, 2017
for more precise miter gauge fitment in my table saw
Mike R on Mar 17, 2017
I have the Incra sled and a 1000HD miter but needed one I could use with a shop fence and do not like the Saw Stop miter - love Incra products.
Donald E on Mar 13, 2017
I wanted to upgrade the stock miter gauge that came with my table saw and the Incra design is very impressive.
Gordon B D on Feb 21, 2017
To improve my miter gauge.
Vernon H on Feb 3, 2017
Christmas suggestion from my husband
Peggy T. H on Dec 8, 2016
ACCURACY AND SIZE
Jerry L on Nov 29, 2016
gift
Laura B on Nov 21, 2016
I need a miter gauge for my router table
Noel S on Nov 19, 2016
Choose the V120 to replace the factory miter gauge on a Dewalt 7491rs table saw. It received good reviews on both Rockler and Amazon. Let's hope it works.
Justin Vander L on Oct 26, 2016
I like the positive angle stops and adjustable width on miter bar .very accurate and easily repeatable angle changes.
paul g on Oct 25, 2016
INCRA is known for quality and accuracy. I own an INCRA jig.
JAMES B on Oct 24, 2016
I was looking to upgrade my stock dealt miter gauge and the reviews on this were great. I'm looking forward to trying it out.
Doug R on Oct 19, 2016
accuracy
Richard B on Oct 18, 2016
new saw old gauge is too sloppy
Hal M on Oct 11, 2016
My original equipment doesn't retain setting in use
Robert F on Oct 9, 2016
Too many 45 degree jigs... need for one small.
RICHARD Z on Oct 5, 2016
5 star
rick j on Sep 16, 2016
I wanted another accurate miter gauge.
Fred M on Jul 26, 2016
I needed a more accurate miter gauge for cutting picture frames on my table saw. I have an old INCRA 2000 GAUGE & you have to take it apart to switch to the opposite 45deg angle quickly with the jig I am making.
M K on Jul 20, 2016
on sale
Tom K on Jul 12, 2016
Angle adjustment features allows fine, accurate angle adjustment/settings.
JoAnn T on Jun 23, 2016
More accurate cuts.
Bob M on May 24, 2016
For use with my recently purchased router table.
John H on Jul 31, 2018
Need an accurate miter gauge
James C on Jul 20, 2018
Does the Incra V120 Miter guage fit a DeWalt DWE7491RS table saw slot ?
A shopper on Sep 4, 2015
Is it works with Bosch PTS10 table saw ?
Alber G on May 9, 2016
BEST ANSWER: I have a Bosch PTS10 (bought in Norway). It does not fit the track in the saw. The t-track on the saw is to narrow (probably based on some metric value).
Whats the difference between the v 27 and the v 120 ?
mark g on May 24, 2015
BEST ANSWER: Both are great gauges with the biggest difference being the number of positive stops on each one. The v27 has 27 positive stops that cover all of the most common angles used but the v120 has a positive stop every 1 degree making it more useful for those "weird" angles.
Can I use this with an incra fence from my incra 5000 miter sled?
Robert L on Sep 30, 2016
Will it work with Bosch 4100-09? Thanks.
Henry P on Dec 22, 2015
BEST ANSWER: The Incra MitreHD/1000 fits my version of this saw (purchased early 2014), so I would assume the V120 does as they use the same mitre bar.
Incra Miter 1000HD Miter Gauge
Incra Miter 1000HD Miter Gauge
will this item work on a Delta 36-725 table saw?
A shopper on May 17, 2015
BEST ANSWER: Yes! I use it on mine all the time.
Will this fit a craftsman table saw # 315.228390?
Roger B on Nov 20, 2016
BEST ANSWER: If the miter slot on the saw is 3/4 inches it will work. Some Sears saws have a 5/8 inch slot. If it will work, you will love it.
Hi, Will the Incra V120 work on a Bosch RA1181 benchtop router table?
William W on Oct 15, 2017
BEST ANSWER: Not sure since I only used it for a table saw. If router table takes the same with it should work but I would think Rockler could check with Incra to make sure.
What is the bottom of the miter gauge made of? Slick plastic, metal, painted metal, what? I have a new JET table saw and the standard JET miter gauge is starting to rust on the bottom surface that makes contact with my steel table saw top. I've conditioned the steel table saw top, however, the JET standard miter gauge leaves streaks of rust, causing me to clean and condition the steel table saw top daily. I'd like to have a miter gauge with a very clean bottom surface if possible.
Kathy P on Sep 15, 2017
BEST ANSWER: The part that rests on the saw top is a hard plastic with a textured surface. It slides easily on my cast iron top. I have found this to be a real nice upgrade from the OEM gauge. I use paste wax on my table top. Have you tried cleaning the rust from your gauge and coating with a protective material like wax or a commercial product?
More Suggestions