Special Price
$989.99
Each
$1,099.99
Each
Direct Ship
No extra shipping charges through 1/27!
Ships directly from the manufacturer. Must be shipped within 48 Contiguous United States.
Estimated Delivery time: 15 business days.
15% restocking fee on all returned merchandise.
Please call customer service before returning product.
The JET Oscillating Edge Sander has the accuracy and durability you need, in one exceptionally well designed machine. Edge, face, bevel, and contour sanding are at your fingertips - with the power for big jobs and control for fine work; all with the power and durability you've come to expect from JET.
Features:
- Oscillating feature reduces heat build-up on sanding belt to reduce loading and burning which increases belt life
- Quick release lever and tracking control dial are conveniently located for replacing and tracking belts
- Belt platen is made from precision-ground steel plate for strength and durability
- Graphite covered steel platen runs cooler increasing machine and belt life
- Cast iron table moves up or down to provide exact workpiece positioning
- 4" dust port hooks up to your dust collection system for efficient dust removal
- Adjustable outer drum support table enables contour sanding
- Tilting sanding head for sanding bevels, angles and flat surfaces
(1) Jet® Oscillating 6'' x 89'' Belt Edge Sander
| Brand | Jet |
|---|---|
| Manufacturer Part Number | 708447 |
| Weight | 275.0000 |
| HP | 1-1/2 HP |
| Belt Size | 6" x 89" |
| Sander Style | Stationary |
| Speed | 3,900 SPFM |
| Dust Collection | 4" Port |
| Volts | 115 |
| Cord/Cordless | Corded |
5.0 / 5.0
1 Review
Glad to have in my Shop
Looks and sounds very powerful. Easy to adjust for square.
Easy to put together but heavy, have your buddy there.
Leave access to the back and belt change is a snap.
Just installed this but have other Jet sanders and they are Great. Look forward to using. The tracking on the belt was great right out of the box.
Easy to put together but heavy, have your buddy there.
Leave access to the back and belt change is a snap.
Just installed this but have other Jet sanders and they are Great. Look forward to using. The tracking on the belt was great right out of the box.
- Was this review helpful? Yes (3) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (3) No (1)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions
Browse 6 questions
and 14 answers
Why did you choose this?
Rockler Store
I've seen good feedback on this. Had good luck with Jet products.
Eric S
on Apr 30, 2019
Good reviews, good price, free shipping.
Michael S
on Apr 8, 2019
I've seen good feedback on this. Had good luck with Jet products.
Eric S
on Apr 30, 2019
reasonable online reviews, tolerable price
Philip R
on Apr 26, 2019
Where might I find the L bracket that is being used for the quick release pin to keep the edge sander square?
BEST ANSWER: Don't know...just build your own!
- Reply
- Inaccurate
- Wayne H on Aug 22, 2016
- Purchased on Nov 28, 2015
Can the voltage be changed 220 ?
BEST ANSWER: Yes, the instructions for changing the 115 volt pre-wired motor to run @ 230 volt (single phase) are on page 11 of the manual, Download the manual and you can check it out to be sure.
- Reply
- Inaccurate
- Ron M on Apr 15, 2019
- Purchased on Jul 16, 2017
What are the dimensions of the base of the edge sander?
BEST ANSWER: The base is 22 1/2" wide and 17" front to back.
- Reply
- Inaccurate
- Forbes I on Jan 9, 2017
- Purchased on Nov 30, 2015
I recently purchased the jet edge sander, have only used it a few times and noticed while sanding a 3.5" side wall box jointed drawer that its sanding more material away at the top and bottom edges..... the sanding belt is not flat against the graphite back plate. It is set up at true 90, belt is tracking and oscillating well. The belt seems as if it has stretched and is puckering along its length, am I doing something wrong? Al
BEST ANSWER: Al, I too have recently purchased this sander, so I do not have a lot of time on it, however I had a similar model (different mfg.) for 20 years. I have experienced the same thing from time to time with the 6 x 89, as well as a 6 x 48 sander and have come to the conclusion it is most often the belt. Try a quality belt and see if that does not do the trick. Chuck
- Reply(1)
- Inaccurate
- Charles J on Oct 17, 2019
- Purchased on Mar 10, 2019
what size is the foot print of this sander? with the belt and motor?
BEST ANSWER: 22" x 50" (with table laid flat)
- Reply
- Inaccurate
- Keith H on May 9, 2017
- Purchased on Dec 1, 2015
What is the minimum cfm for dust collection?
WARNING This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product