In stock
Continuous (piano) hinges, available in 36" to 72" lengths, countersunk screw holes every 2" with slotted holes at both ends, post-production nickel finish.
Grouped product items
Product Name Price Qty
Nickel, Slotted Piano Hinge, 36" L x 1-1/2" W
Nickel, Slotted Piano Hinge, 36" L x 1-1/2" W Item #: 30085
In stock
$16.99
Each
  • Buy 10 for $15.29 each and save 10%
Nickel, Slotted Piano Hinge, 36" L x 1-1/16" W
Nickel, Slotted Piano Hinge, 36" L x 1-1/16" W Item #: 37750
In stock
$15.99
Each
  • Buy 10 for $14.39 each and save 10%
Nickel, Slotted Piano Hinge, 72" L x 1-1/2" W
Nickel, Slotted Piano Hinge, 72" L x 1-1/2" W Item #: 39170
In stock
$24.99
Each
  • Buy 10 for $22.49 each and save 10%
Nickel, Slotted Piano Hinge, 72" L x 1-1/16" W
Nickel, Slotted Piano Hinge, 72" L x 1-1/16" W Item #: 33305
In stock
$22.99
Each
  • Buy 10 for $20.69 each and save 10%

Post-Plated Continuous Hinges-Nickel

Item #
GRP11292_1
Rating:
94% of 100
With deluxe post-plated finishes and end-to-end support, these piano hinges combine flawless appearance with unwavering stability, making them perfect for a wide range of applications. Countersunk screw holes every 2" ensure maximum strength, while slotted holes at both ends allow for simple installation and alignment. And since the rich nickel finish is applied at the end of production, there is minimal risk of marring during fabrication. Several sizes available from 36" to 72" long. Listed dimensions refer to length of barrel x open width.
  • There is an additional $7.00 shipping charge for item #33305 & #39170
(1) Hinge
Mounting Screws
More Information
Weight 1.6500
Technical Documents
4.7 / 5.0
7 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
0
1
0
0
Would buy again
Very good hinge. Holes are countersunk just enough to use a self centering bit. Had no problems installing.
December 31, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
hinge
Ease of ordering from site and timely delivery. Product works perfectly and was easy to install.
November 29, 2016
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
Works as advertised
September 1, 2016
Purchased
over 3 years ago
Woodworking Experience:
Advanced
Great packaging, good price and fast shipping.
May 9, 2016
Purchased
over 3 years ago
They are easy to work with and great for holding its weight limits.
June 5, 2015
Purchased
over 4 years ago
Woodworking Experience:
Intermediate
piano hinge
it's a hinge, nothing much to say. easy to install and works fine.
April 28, 2015
Purchased
over 4 years ago
Woodworking Experience:
Intermediate
Post plated continuous hinges
The hinges are nice looking and the installation went smoothly.
April 23, 2015
Purchased
over 4 years ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 9 questions Browse 9 questions and 6 answers
Why did you choose this?
Rockler Store
The reputation of Rockler
Rob on Aug 13, 2018
Fix a drop leaf table that has a rusted hinge
Donna J B on May 2, 2018
The reputation of Rockler
Rob on Aug 13, 2018
Needed to make jig
Dave S on May 14, 2018
Fix a drop leaf table that has a rusted hinge
Donna J B on May 2, 2018
color, function
PK K on Apr 30, 2018
Couldn't find it locally
Mike P on Mar 23, 2018
Will use this to attach my folding workbench section to my stable workbench.
Daniel H on Mar 4, 2018
Can be cut to length.
Alex L on Mar 3, 2018
Needed a piano hinge to install a folding table
William L on Feb 10, 2018
Building a desk
James G on Jan 27, 2018
Looking for quality
Fred B on Jan 2, 2018
wide size
Jon D on Dec 30, 2017
for a fold down table project
vulcaneet on Dec 29, 2017
To use as a hinge for the lid on the toy box I built for my grandson.
James M on Nov 29, 2017
to make kitchen cabinets
Andrew P on Nov 19, 2017
For the lid of a bench seat.
Jody T on Oct 23, 2017
making a 12'W x 36"L folding tray to set stuff on beside me while cooking on my gril
lonnie g on Sep 7, 2017
Building a cedar blanket chest
Thomas A. B on Jul 2, 2017
Strength of assembly
E Sam F on Mar 6, 2017
Working on a 48 inch toy box that requires this length hinge.
Ernest G on Feb 22, 2017
Price
Richard P on Feb 20, 2017
Takes care of several projects
Ross M on Feb 11, 2017
Toy box lid
Randall A on Jan 28, 2017
The oval holes for assembly and round holes used after fine tune
Brian's Automotive S on Dec 28, 2016
Size matters
John R on Oct 28, 2016
right size hinges to finish woodworking project
Kiryenski M on Aug 21, 2016
I have a 54" wide toy chest lid and this was pictured with similar lids I viewed and went well with the box lid supports I purchased. This should help keep lid uniformly closed and sealed nicely.
Paul C on Jul 16, 2016
Required for a project
Jeff R on Mar 13, 2016
same as above
Robin G H on Jan 23, 2016
Appropriate size for what I needed
Jonathan M on Jan 11, 2016
It will be used in a basement enviroment
Jimmy C on Jan 4, 2016
price
michael H on Nov 2, 2015
put a lid on a tact box
John on Oct 4, 2015
needed for desk top
Harry C on Aug 23, 2015
Needed 6 ft piano hinge ... couldn't find locally. I have confidence in Rockler products so spent a little more than some other internet options.
Hans S on Jul 16, 2015
Needed a hinge over 48"
Ronald A on Jul 2, 2015
Needed for a router table top.
Ed C on Jun 20, 2015
I'm tired of the gold tone hinges of the same type......
Charles P on Jun 10, 2015
Needed to make jig
Dave S on May 14, 2018
color, function
PK K on Apr 30, 2018
When mounted vertically, what kind of weight per foot can these hinges bear?
Nathan S on Mar 2, 2016
Curious, why is the 1 1/16" wide hinge more expensive than the 1 1/2"?
RoBanJo on Nov 18, 2015
I have a gable roof that fits over a wooden box approx. 4'x4' I want to know if a piano hinge will hold the gable roof to my box. The roof is approx. 85-90 lbs.??
bob p on Aug 26, 2015
can these hinges be cut to size?
A shopper on May 5, 2015
BEST ANSWER: Rockler does not offer any cutting services, however end user can cut this to any length needed using a metal cutting blade.
I'm mounting one side on a 3/4" edge of a box, the other side on the box lid. What is one leaf width? Is 1 1/2' hinge width the right size without overhanging the edge?
Stan T on Apr 14, 2017
BEST ANSWER: The 1-1/2 dimension is the width of the hinge when open and laying flat. It will measure 3/4" from center of pin to the outer edge. If your two mounting surfaces are 3/4" wide the hinge will fit with no room to spare.
What size screw is recommended ?
David W on Apr 8, 2015
BEST ANSWER: Be sure to use the right screws! This hinge calls for #6 sheet metal screw, which has threads all the way to the head. The head will be tapered so that it fits inside the indentation in the hinge, allowing for folding flat.
can this be cut to 35 inches?
Gary N on May 7, 2018
BEST ANSWER: Yes the hinge can be cut to length.
Is the finish on the nickel hinges a bright finish or more of a matte finish?
AmericanPatriot on Mar 8, 2016
BEST ANSWER: Bright, chrome like!
can I install this with lid stay torsion hinges?
Robert B on Apr 6, 2018