$9.99 Each
In stock
Create your own customized cabinet pulls in the material of your choice!

Rockler Custom Pull Turning Kit, Modern

Item #
52441

As we all know, good hardware can really set your furniture and cabinetry apart from the crowd. Our Custom Pull Turning Kits provide a unique and creative way to achieve that goal. Use the wood species (or alternative material) of your choice, and whatever shape best suits your project to add that extra bit of ''oomph.'' You can achieve a flawless match between wooden pulls and wooden drawer fronts (or doors) by using the same piece of wood for both—a fantastic effect when using figured woods. Of course, you can use acrylics and a wealth of other materials as well.


For best results, use Rockler's bushings for Rockler Custom Pull Turning Kits (#58077, sold separately).

(2) Cabinet Pull Bases
(1) 7mm x 4-1/2'' Brass Tube
(2) 8-32 x 1'' Pan Head Bolts
More Information
Brand Rockler
Weight 0.2500
Tech Spec
  • Kits use a standard 7mm pen tube to support the handle section, and a 4-1/2'' tube is included for a pull with a maximum 5-1/2'' center-to-center dimension
  • Trim the tube to any length, or purchase longer tubes if a longer pull is desired
  • The ability to vary the center-to-center dimension makes the kits ideal for retrofitting pulls to pre-drilled holes
  • Available in Modern and Traditional styles
  • Finish: Brushed Nickel
  • Maximum Center-to-Center Dimension (with included tube): 5-1/2''
  • Brass Tube Length: 4-1/2''
  • Brass Tube Diameter: 7mm
  • Hardware Projection: 1-9/16''
  • Technical Documents
    Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

    There are no reviews for this item. Write Review
    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 2 questions Browse 2 questions and 3 answers
    Why did you choose this?
    Rockler Store
    Looks like a fabulous for precut holes!
    Rochelle M on Sep 14, 2019
    Looks like a fabulous for precut holes!
    Rochelle M on Sep 14, 2019
    Want to add a personal touch to my standard desk at work.
    Gisele C on Mar 27, 2018
    Want to add a personal touch to my standard desk at work.
    Gisele C on Mar 27, 2018
    What is the role of the 7 mm tube? And what is the outer diameter of the base where it meets the handle? The 7 mm tube, about the diameter of a pencil, is most likely too narrow to be a handle. Looks like the bases have "tendons" -- I take to be 7 mm, in diameter -- that would engage a hole in each end of a larger diameter handle to hold the handle in place.
    Larry D on Jul 5, 2018
    BEST ANSWER: the handle is meant to be turned like a pen would be on a lathe. . the metal tube is meant to installed inside of a piece of wood that is to be put on a turning mandrel be made into the desired shape. there are bushings to be used so that the outside diameter matches the hardware. good luck.
    More Suggestions