$11.99 Each
In stock
  • Buy 10 for $10.79 each and save 10%
  • Buy 25 for $9.71 each and save 19%
  • Buy 50 for $8.25 each and save 31%

Summit Fancy Pen Hardware Kit - Gold

Item #
47196
Rating:
78% of 100

The Fancy Summit pen hardware provides a beautiful window to the wood it wraps around, making this classic pen a fine writing choice for anything from wedding guestbooks to corporate contracts. Twist operation, with a smooth-writing, carbide-tipped Schmidt® refill. Use the bushings, drill bit, and mandrel listed below.


Turning Accessories Needed:
  • Necessary Blank Size: 3/4" x 5" (sold separately)
  • Pen Turning Mandrel (sold separately)
  • Fancy Summit Bushing Set (#49156, sold separately)
  • 7mm Drill Bit (#36372, sold separately)
(1) Gold Summit Fancy Pen Kit
More Information
Manufacturer Part Number RZ-EFPB-G
Weight 0.0700
Technical Documents
Finish Gold
Type Pen
Style Summit
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
3.9 / 5.0
11 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
4
2
0
1
Beautiful pen
Great product everyone that sees it wants one. My husband turns the top a little small so the fancy part spins freely and people love it. It is a fidget for an adult. You can spin that rather than clicking or twisting the point in and out wearing out the pen mechanism.
March 31, 2019
Purchased
6 months ago
Woodworking Experience:
Intermediate
Love this kit
I started this pen once but was unhappy with how it was turning out. I saved the tubes and put it away for a few months. I just recently pulled it back out and this is the result. It has had a larger response than any I have posted so far. Not the easiest one I have done, but not the hardest either. Time and patience is the key. Will purchase more in the future.
User submitted image
Added Mar 2, 2019
March 2, 2019
Woodworking Experience:
Advanced
Great pen
As long as you are willing to stop frequently to check size of blank as you are turning, the filigree fits on perfectly. Looks great!
December 11, 2018
Purchased
10 months ago
the pen great looking and people love it
May 26, 2017
Purchased
over 2 years ago
Woodworking Experience:
Advanced
Makes a very nice pen
I've only made two so far, and they were both very well received. The quality is good (one kit had significant scratches at the nib-end). Fitting the filigree takes a little extra time and effort, but the result is worth it. The filigree really dresses-up the pen.
User submitted image
User submitted image
May 6, 2017
Woodworking Experience:
Advanced
It's different.
My wife really likes this one.
December 18, 2016
Purchased
over 2 years ago
Woodworking Experience:
Advanced
Beautiful, but work intensive.
This kit is a beauty, but be prepared for some extra work as it may take several steps to get the filigree to fit snugly without scratching the blank. I would build again, but go into with eyes wide open.

Also, the diameter difference between the upper and lower is significant. Just bear that in mind.
User submitted image
Added Sep 18, 2016
September 18, 2016
Woodworking Experience:
Intermediate
Just shy of perfect.
Apparently the bushing kit has changed since the instructions were created. There are only four bushings instead of five, but I made it work. The short tenon is just a little bit tricky, but when this pen is finished, it is a stunner and I recommend it for one of your higher end pieces.
August 23, 2016
Purchased
over 3 years ago
Woodworking Experience:
Intermediate
Looks great, but a pain the backside that could’ve designed better
This kit could have been designed better and the instructions could be improved. Having to turn a tenon is silly. This could easily have been designed to make the center band press on (as the cap does) vice turn a tenon. Plus, the directions to use CA glue to keep the center band in place would then be unnecessary. Further, a simple instruction note to verify the filagree piece slips over the upper before pressing the cap into place should be added vice waiting until after the cap is on. If it doesn’t, you’ll have to take the upper apart to adjust.
User submitted image
User submitted image
User submitted image
April 19, 2019
Purchased
5 months ago
Woodworking Experience:
Intermediate
This pen looks great, but it goes together tough.
December 30, 2018
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 14 answers
Why did you choose this?
Rockler Store
For wedding pen
Kevin B on Sep 15, 2019
I one before....turned out great
Jerry T on Jun 12, 2018
For wedding pen
Kevin B on Sep 15, 2019
Something new.
Chris S on Aug 21, 2019
I one before....turned out great
Jerry T on Jun 12, 2018
I love the gold, bling!
Robert P on Dec 11, 2017
Intrigued by design
Seeker on Feb 21, 2017
price
Billy S on Feb 16, 2017
wanted to try
james z on Jan 20, 2017
Too rough too handle
Everett H on Dec 17, 2016
To use as a closing gift for clients at house closings and contract signings
Jeff L on Jul 28, 2016
Just looking for a new pen style to offer.
W K on Jul 28, 2016
For gift to friend
Jack M on Apr 4, 2016
liked the design
david e on Mar 11, 2016
business stock
Thomas S on Jan 12, 2016
Something new.
Chris S on Aug 21, 2019
I love the gold, bling!
Robert P on Dec 11, 2017
What is the exact length of the tubes? I lost one of them and it does not specify the lengths in the instructions.
Jeffrey P on Jan 2, 2018
BEST ANSWER: Upper tube 2.091”, lower tube 2.364”