Store Locator
Grouped product items
Product Price Qty
Rockler T-Track Tape Measure Insert Kit, Left-Right
Rockler T-Track Tape Measure Insert Kit, Left-Right Item #32893
In stock
$12.99 Set
Rockler T-Track Tape Measure Insert Kit, Right-Left
Rockler T-Track Tape Measure Insert Kit, Right-Left Item #31193
In stock
$12.99 Set

Get Expert Advice

Return Policy

Rockler T-Track Tape Measure Insert Kits

Add easy measurements and fast setups to your T-track accessories—includes self-adhesive tape measure, plastic insert and hairline indicator.
Item #
GRP25133_1
Rating:
58% of 100

Need a measuring reference on your T-Track device? These 36'' plastic T-track tape measure inserts fit any universal T-Track to give you accurate measurements along your fence in increments of 1/16''. Use them for fast, foolproof adjustments of your fence stops or for general measuring. Ideal for use with all Universal T-Tracks, Multi Tracks, and Double T-Track Fence Caps. Each tape comes with a rigid plastic insert and an acrylic hairline indicator with adhesive backing that can be attached to Rockler Flip Stops (#26991 and #31214) or other homemade stops. The 48'' steel measuring tape is easily cut to match the 36'' plastic insert. The additional length allows you to cut the tape to start at a number greater than zero if you are a setting up a stop system on your cut-off fence.


Note: Metal fence components and material stop are not included.

(1) 36'' long plastic insert
(1) 48'' long self-adhesive tape measure
(1) Plastic hairline indicator
More Information
Brand Rockler
Weight 0.5300
Tech Spec
  • Plastic Insert Length: 36''
  • Tape Measure Length: 48''
2.9 / 5.0
13 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
1
2
2
4
just what I wanted
Works ideally for my application
May 13, 2015
Purchased
over 4 years ago
Woodworking Experience:
Advanced
Great product. My only problem with...
Great product. My only problem with the double T Trammel was thre was no pre drilled holes on the leg of the piece to mount it to the ridget fence. So I drilled them and countersunk the unit and I am extremley happy with it and the mounting of the stop block and tape on top is super.
June 8, 2011
I needed a fence for the...
I needed a fence for the radial arm saw. I found this item in the Rockler catalog and decided to give it a try. Installation was easy. Added the measuring tape and now the task of measuring has been simplified to a point that I save time and repeat any measurement in a very efficient way. I highly recommend this product.
April 22, 2011
I saw an article in ShopNotes...
I saw an article in ShopNotes Magazine Nov/Dec issuewritten by Bryan Nelson about T-Track Trammel. Well I needed one myself so thats why I ordered parts from Rockler . I attached the tape to the top of T-Track, made the heads from so maple scrap that I had. It all works very well . I'm very pleased with Rockler Products that I've ordered so far.
December 6, 2010
Very Useful
Used this on top of the fence for my miter saw. It stuck to the 1" x 4" I used to make the fence with no problem at all, easy to position properly so the cuts are dead on. Nice to not need a tape measure to cut a few boards.
April 21, 2017
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
T-Track Tape Measure
I found it EXTREMELY hard to install the strips into the track. It was shaving off on the edge.
User submitted image
Added Apr 12, 2019
April 12, 2019
Woodworking Experience:
Intermediate
T-track tape measure
It does what it is supposed to do. Easily installed and accurate.
April 12, 2017
Purchased
over 2 years ago
Woodworking Experience:
Advanced
Less than expected
The arm is. It long enough to provide a stop for some wood. It depends on the height of the fence. So, if the fence is high enough to cut a 2 x4 then the arm wont reach down to less thick wood.
July 27, 2017
Purchased
over 2 years ago
Woodworking Experience:
Advanced
Won't slide into track!!
I had no issue receiving my order as in the past. The problem is the tape would not slide into the T-track and I tried both sides to see if it would work but neither one fit. I emailed the Q&A and was told to sand the length of the rubber tape till it fit. Took some tome but that did in fact work. After all that it does work rather well.
October 11, 2015
Purchased
over 4 years ago
Woodworking Experience:
Advanced
Doesn't fit Rockler t track system as advertised
It doesn't fit into their t double t track system as advertised... I should have read the reviews before buying.... I guess the kreg system was a better choice after reading reviews and questions and answers.
April 13, 2019
Woodworking Experience:
Beginner
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 12 questions Browse 12 questions and 22 answers
Why did you choose this?
Rockler Store
tape is sheilded from damage in the double T-Track
Walter Q on Jun 30, 2018
to plut on my table saw sled.
Jeffrey S on Apr 16, 2018
tape is sheilded from damage in the double T-Track
Walter Q on Jun 30, 2018
Appropriate for tasks
Dan W on Jun 20, 2018
to plut on my table saw sled.
Jeffrey S on Apr 16, 2018
need for jig
Michael A on Jan 27, 2018
Measuring miter stop.
L J on Jan 3, 2018
Ease and accuracy
Dave B on Dec 8, 2017
Operational accuracy for jigs
Gary N on Nov 27, 2017
ease of operation
Vincent O on Nov 15, 2017
I an making a router fence
WILLIAM T on Sep 4, 2017
Making a cross cut sled
Helen R on Apr 18, 2017
I am building a table saw sled and I think this will help improve the accuracy of my cuts.
Mark L on Apr 16, 2017
A HANDY ADDITION TO MY MANY TOOLS
JOHN B on Feb 28, 2017
To build a cross cut sled for the table saw.
Vernon U on Jan 26, 2017
This will make it a little easier to set up the Flip Flop Stop on my Cross Cut Sliding table.
Robert W on Dec 22, 2016
I am an older woodworker, but I firmly believe in utilizing measuring tools that aid in accuracy and efficiency when working with power tools. Remember the old adage "measure twice, cut once?" Nice to have a measuring aid close by to double check my measuring.
Alan on Sep 23, 2016
to make jigs
Irving B. F on Sep 10, 2016
FOR RADIAL ARM SAW
Dale on Jul 14, 2016
shop
Robert E on May 2, 2016
Building a new miter saw station and want to put rulers in the t-track.
Monna D on Apr 9, 2016
setting up router table
ROBERT M on Apr 6, 2016
How else are you going to keep good measurement?
Mac M on Feb 28, 2016
For my chop saw
Robert S on Jan 29, 2016
I needed this to add to my cross cut fence I was making , so far it is working out well.
James B on Jan 19, 2016
to get free shipping.
William R on Jan 7, 2016
because it works great with my radial arm saw.
Greg on Nov 27, 2015
For a drill press fence
Todd O on Aug 20, 2015
This will work in conjunction with the stop on the table saw. I have a dual track on top of my Biesemeyer fence so the tape measure will slide in along with the stop. Saves measuring.
wayne b on Aug 19, 2015
"I build Adirondack furniture. I am going to use this to set up my miter saw for quick and easy set up for the multiple cuts I have to make to build this furniture."
Doc T on Aug 18, 2015
"needed for new project"
flaplante on Aug 2, 2015
Recommended in the plans I am working on.
Valerie S on Jul 14, 2015
I bought this to use on a miter saw fence.
Robert R on Jun 18, 2015
Don't know. It doesn't work with anything I bought from Rockler.
Thomas on May 17, 2015
Making jigs
Jerry C on May 4, 2015
Extended my capability for measuring boards at the table saw and miter saw when used with the fence cap
Ray on Apr 14, 2015
Appropriate for tasks
Dan W on Jun 20, 2018
need for jig
Michael A on Jan 27, 2018
is it available in metric?
A shopper on Jun 1, 2015
BEST ANSWER: Sorry no, this is not being offered in metric.
Do I need two tracks?one for the stop and one for the tape?
michrkhd m on Dec 15, 2015
BEST ANSWER: NO get one track by Kreg DO NOT get the tape insert kit because it does not slide in , you have to fight it and sand th back down!!! the kreg fence cap the tape lays right on top!!
What is the difference left to right and right to left which one do I buy?
M T on Jul 23, 2018
BEST ANSWER: The difference is which way the measurements go. For example the right to left means that the right side starts at 0 and counts up the farther you go to the left.
Which one you buy is up to which direction you need to measure. If the stock you want to measure feeds out to the right, get the left to right. If it feeds out to the left, get the right to left.
Hope this helps. Enjoy, I love all of mine
Mine seems to tight. Plastic is shaving off and I can only shove it in my top track a few inches. Is this normal?
Dustin B on Apr 29, 2017
BEST ANSWER: I did not have that issue. i would check the squareness of the object your inseting it into. i have found that even my huge table saw goes out of square over time,
Does this work with the table saw small parts sled?
Missy G on Oct 2, 2018
BEST ANSWER: You could make it work for your table saw but you got to think about how you're going to set it up
Can the ruler be in centimeters?
Jacek on Apr 15, 2018
BEST ANSWER: Rockler only sells tapes with “inch” scales; either left-to-right or right-to-left.
Have you t track tape in cm?
Mundo B on Jun 11, 2017
BEST ANSWER: Sorry, we do not.
How do you compensate for the flip stop if indicater is on the opposite side of it and your miter fence rite agaist saw blade to start at zero to make a exact cut when indicater is setting on the leagth you need to cut but it is 3/4 inch off for thickness of the flip stop?
Birdhouse on Nov 19, 2018
BEST ANSWER: The T-Track Tape Measure Insert is adjustable in the T-track in order to calibrate it to allow for the thickness of the flip stop when using the indicator, whether you are cutting to the left or right of the blade. This can be accomplished by measuring from the cutting edge of the blade to the flip stop at 12" (for example). You would then adjust the T-Track Tape Measure Insert to 12" on the indicator. You can do this for the left side of the blade and again for the right side of the blade. You should check it periodically to maintain calibration. It's a great system and has worked well for me.
Rockler provides a hair line plastic viewer with the measuring tape, but the line does not line up with the actual stop. So your cut will always be longer than what the tape reads at the hair line?????
Bosley on Jul 29, 2018
BEST ANSWER: The tape is adjustable. You measure from the edge of your blade over to the stopper, then adjust your tape directly under the line. Then set the tape with glue to keep it in place.
what is the name/code of the product supporting fence in 90 degree in the picture?
Hongjik K on Mar 8, 2017
BEST ANSWER: No longer available. You could use a combination of item#35961 and item#34262.
What I have a fence that is 6' feet long and I want to attach you double track with the flip stop to act as a stop for cutting longer stock than 48". Is there a tape that measures 6'?
Nick W on Feb 12, 2017
BEST ANSWER: amazon has tapes that are six feet or longer.
Is there any other scale that could be used to provide either metric and/or finer 1/32" graduations? I know this one doesn't have that but if one could purchase one from say incra or ?
EDWARD L on May 14, 2016
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov