$29.99 Each
In stock

35 mm Diameter x 4'' Long Shank Carbon Steel Forstner Bit

Item #
10104
Rating:
70% of 100

Perfect for doweling, mortising, pocket holes, hardware installation and more! Features a 4'' long shaft and 3/8'' diameter shank.

(1) 35 mm Diameter x 4'' Long Shank Carbon Steel Forstner Bit
More Information
Manufacturer Part Number TA701961LC
Weight 0.2500
Tech Spec
  • Diameter: 35mm (1-3/10")
  • Shank: 3/8"
  • Shaft Length: 4"
  • Material: Carbon Steel
Bit Material High Carbon Steel
Bit Size 35 mm
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
3.5 / 5.0
49 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
25
2
8
1
13
Clean cut
I have cut 40 some holes now for my kitchen cabinets project and still cutting smooth and clean.
May 20, 2019
Purchased
3 months ago
Woodworking Experience:
Intermediate
replacement for dulled bit
Works as intended
May 4, 2019
Purchased
4 months ago
Woodworking Experience:
Intermediate
35mm bit
This bit is the perfect bit for drilling cup holes for the Euro concealed hinges. Along with the Jig-It concealed hinge jig and the stop set it makes perfect holes every time.
April 27, 2019
Purchased
4 months ago
Woodworking Experience:
Advanced
Worked great on 2 cabinet doors.
August 10, 2018
Purchased
1 year ago
Woodworking Experience:
Intermediate
Works great in my drill press. I am converting cabinet doors from visible to non visible hinges. My challenge is that the doors are not square on the edges, but are routed roundish, is I have a minimal margin to drill the hinge hole without tearing through. The drill does a very neat job; hope it stays sharp fr 50 or so doors!
April 18, 2018
Purchased
1 year ago
Woodworking Experience:
Intermediate
Perfect Match for Deluxe Jig
Cuts through hardwood with ease. I have used it on MDF also and shaves right through the wood fibers leaving a clean and well defined hole.
User submitted image
Added Apr 7, 2018
April 7, 2018
Purchased
1 year ago
Woodworking Experience:
Intermediate
Will work great
I have not had a chance to use it yet, as it arrived after I had to get the project done.
February 25, 2018
Purchased
1 year ago
Woodworking Experience:
Advanced
Bit
I needed this bit to use it with the Jig it tool I purchased
December 11, 2017
Purchased
1 year ago
Woodworking Experience:
Advanced
I like how it cuts a clean hole in hard wood with no tear out. I would recommend this product. I used it for cupboard door hinges.
November 22, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
Rockler has never let me down ever since I became a customer.
I would recommend this bit anytime for its quality and durability, and the efficiency.
October 21, 2017
Purchased
1 year ago
Woodworking Experience:
Advanced
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 5 answers
Why did you choose this?
Rockler Store
Wanted a precise cut
James A on Aug 11, 2019
Need it to prep for concealed hinges on multiple cabinet doors
keith b on Jul 30, 2019
Wanted a precise cut
James A on Aug 11, 2019
couldnt find anywhere else
Hilltop C on Aug 5, 2019
Need it to prep for concealed hinges on multiple cabinet doors
keith b on Jul 30, 2019
European style hinges
Ronald G on Jul 15, 2019
Need to install hinges with a jig that requires this bit
Steve W on Jul 7, 2019
for hinge installation. recommended by Rockler tech support
Pamela B on Jul 5, 2019
Goes with the installation jig
Johanna U on Jun 29, 2019
used for concealed hing drilling system
Jeffrey P on May 25, 2019
required for hinge jig
Charles W on May 10, 2019
i got the jig. this is the only bit that fit
Onn A on Apr 28, 2019
It’s the only Forstner bit that works with the Jig it cabinet door system.
LUIS V on Apr 23, 2019
Its the only one I could find that will fit my Rockler Hinge Jig. Warning to others to avoid delays in your work is to purchase this at the same time you buy the jig.
Renzo B on Mar 30, 2019
Needed for Jig it Hinge system
G U on Mar 26, 2019
hinge bore bit to accompany rockler jig
Matt R on Mar 21, 2019
Not sure where my other one is.
Roy B on Mar 3, 2019
Item needed to properly install the hinges.
William T on Feb 26, 2019
needed this to use with the Jig-It system
Gary C on Feb 10, 2019
It's needed to use with the Jig It Hinge system.
Steve Z on Jan 26, 2019
Bought to use with the Concealed Hinge Drilling System
Craig T on Jan 12, 2019
Lost my job... and I'm venturing into possibilities of making kitchen cabinets etc..
Miguel P on Jan 7, 2019
Need it for the cabinet door jig
GRAHAM V on Jan 6, 2019
To use with JIG IT concealed hinge system
David A on Jan 1, 2019
concealed hinges
Stuart B on Dec 24, 2018
It is suggested/needed when using the deluxe concealed hinge jig-it.
N A on Dec 24, 2018
It is a good companion to the jig
Kenwyn P on Nov 30, 2018
ease of installation of hinge
Kevin W on Nov 28, 2018
to go along with jig
David J on Aug 6, 2018
recommended by rockler when I selected the hinges to my shopping cart
Elizabeth W. B on Jul 18, 2018
Planning to convert old cabinet hinges to concealed hinges in kitchen.
Gail S on Jun 27, 2018
Needed new bit
Michael S on Jun 3, 2018
It was recommended and the pricing was in line
Gerard M on May 8, 2018
Just needed a 35 mm bit. Hope it is as good as advertised
Jim on May 7, 2018
Quality product
Tony F on Apr 21, 2018
Cost
Scott S on Apr 11, 2018
Because that’s what I need for my boring kit for cabinet doors.
Mike L on Apr 4, 2018
Needed to install hinges
Paul R on Mar 26, 2018
I use this for my concealed hinge boring
Stuart B on Mar 26, 2018
needed to go with the JIG IT
Clifford J on Mar 2, 2018
To use with the Jig It concealed hinge installation jig. Needs the longer shaft.
Fritz on Feb 5, 2018
Need to bore flawless holes for concealed hinge cups.
Paul A on Jan 16, 2018
For my hinges
Robert H on Dec 27, 2017
need it for door hardware jig I purchased
Ron on Dec 25, 2017
to go with jig it system
Myra L on Dec 24, 2017
Quality
Frank B on Nov 29, 2017
To use with a rocker door jig I previously purchased
Eric R on Nov 26, 2017
to replace my previous bit on which one of the cutting spurs broke off. (Not a good sign given the very limited number of times I have used it).
Mike on Nov 23, 2017
For a Cabinet door project.
Cindy H on Nov 16, 2017
Internet size for hinges
Pat M on Nov 1, 2017
Watch a you tube video-recommended this to drill the holes
Korin C on Aug 1, 2017
replacement bit for hinge drilling jig
Joseph B on Jul 28, 2017
couldnt find anywhere else
Hilltop C on Aug 5, 2019
European style hinges
Ronald G on Jul 15, 2019
What is the correct size of this bit? Text say both 35mm and 1-3/10’’ diameter but 1-3/10’’ is only 33mm (5/64" difference)
A shopper on May 2, 2015
BEST ANSWER: The correct size of a 35mm bit in fractions is 1-3/8"
is this made in china?
junjie on Oct 24, 2017
BEST ANSWER: I don't know where is made, but it work very well, and after 3 years of use it keep the sharpness like the first day. I'm a cabinet maker and using it at least once a week.
What is the length of the pilot?
Fred B on Sep 22, 2016
BEST ANSWER: pilot on th 5 inch forested not is about 1/8th inch.
More Suggestions