VIEW
29961
$24.99
Each
In stock
The 8mm shank of this dovetail router bit is 25% larger than typical 1/4" bits for reduced chatter. It fits all existing Rockler dovetail jigs.
- Requires a router with a 1/2" collet, as well as a 1/2"-to-8mm collet adapter.
(1) Rockler 14° Dovetail Router Bit
| Manufacturer Part Number | TA91023-8S |
|---|---|
| Weight | 0.0700 |
| Tech Spec | |
| Bit Type | Dovetail |
| Diameter | 1/2" |
| Shank Size | 8mm |
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.govWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
2.7 / 5.0
3 Reviews
Excellent quality performance on multiple different hardwoods.
I have made over 40 dovetail drawers with this bit, it consistently gives top quality performance. I will buy another when needed.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
broke it before I could use it....
I agree. Why not just use a 1/2 inch bit? I had to destroy it removing from the collet doing a test fitting. Very difficult to get into the collet.
- Was this review helpful? Yes (0) No (2)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (2)
- Flag as Inappropriate
Strange size bit
I purchased this bit because I destroyed the original, that came with the jig, trying to get it out of the 8mm to 1/2 in bushing. This one jammed in the bushing as well, but I got it out after much struggle. I think the 8mm to 1/2 system is not a good one. Why not just offer 1/2 inch router bits with the jig? When trying to insert the bit + bushing in the 1/2 router collet, the bushing kept on slipping to the bottom of the collet. I think this system introduces too many, unnecessary parts. There are better options available.
- Was this review helpful? Yes (6) No (6)
- Flag as Inappropriate
- Was this review helpful? Yes (6) No (6)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions
Browse 2 questions
and 3 answers
Why did you choose this?
Rockler Store
Damaged my bit when it slipped and came in contact with the metal portion of the dove tail ji
Barry R
on Jul 12, 2019
mine broke
Mark
on Feb 8, 2019
Damaged my bit when it slipped and came in contact with the metal portion of the dove tail ji
Barry R
on Jul 12, 2019
Replacement for bit that came with my rockler dovetail jig
Barry R
on Feb 9, 2019
I have 2 routers - both with 1/4" collet. OnE is a Dewalt DWP611. This jig notes the need for a 1/2" collet. What do you recommend? And, another router is not an option.
BEST ANSWER: If another router (with 1/2" collet) isn't your option, there is no recommendation for you. Your 8 mm bit will not fit 1/4" router collet. Looks like you have to get a router with 1/2" collet.
- Reply
- Inaccurate
- Kaz P on Mar 24, 2019
are the dove tail router bit angles all the same angle?
BEST ANSWER: There are three router bits for this jig. The 14 degree dovetail bit is for the half blind dovetails and the other two bits (8 degree dovetail and a straight bit) are for the through dovetail. They work with the provided templates.
- Reply
- Inaccurate
- Jenny T on Apr 13, 2015
- Purchased on Jan 26, 2015
Frequently Bought Together
More Suggestions