Store Locator
Special Price $25.49 Each $29.99 Each
In stock

Get Expert Advice

Return Policy

Clear Flexible Dust Collection Hose - 2-1/2'' Diameter

Reinforced with steel wire, this hose is designed to last and last. Transparent PVC lets you easily find blockages in the event they occur.
Item #
22784
Rating:
88% of 100

The clear medium weight PVC dust collection hose is wire reinforced and has an inside diameter of 2-1/2" and is 10 feet long. The Clear Flexible Dust Collection hose is ideal for any work shop. The extreme flexibility allows you to easily position the dust collection hose exactly where you want it.

(1) Clear Flexible Dust Collection Hose - 2-1/2'' Diameter
More Information
Manufacturer Part Number 8171025002A
Weight 3.5000
Style Flexible
Size 2-1/2"
Length 10 ft
4.3 / 5.0
179 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
92
21
16
6
5
Just as described works great thanks again rockler
July 4, 2020
Purchased
1 month ago
Woodworking Experience:
Intermediate
HOSE
WORKS FINE
June 24, 2020
Purchased
5 months ago
Woodworking Experience:
Intermediate
Great product!.
I am using it to vacuum my router table, both the dust box and fence dust pickup.
June 20, 2020
Purchased
1 month ago
Woodworking Experience:
Intermediate
perfect
despite the usps problems. once it arrived it was perfect
June 12, 2020
Purchased
2 months ago
Woodworking Experience:
Beginner
Dust system flex hose
Easy to use and install although expensive. I like the fact that I can see the dust moving in the system and where any material clogs might be located.
June 1, 2020
Purchased
2 months ago
Woodworking Experience:
Intermediate
Hose
When hooked to my DC, this hose sucks.
May 29, 2020
Purchased
2 months ago
Woodworking Experience:
Advanced
Works great
Used this hose to connect my router table ports to Dust Deputy cyclone and shop vac
May 26, 2020
Purchased
9 months ago
Woodworking Experience:
Intermediate
Used for an alternate purpose
Purchased this for heater hose where needed in my boat. Needed this smaller size than most heater hose
May 22, 2020
Purchased
2 months ago
Dave
Great flexibility and fit
May 16, 2020
Purchased
3 months ago
Woodworking Experience:
Intermediate
Good solid product!
Just as expected. I use it with my dust collection system to collect missed dust/chips. Smaller than the 4" and much easier to handle and works with old shop vac attachments to get into small areas.
May 5, 2020
Purchased
3 months ago
Woodworking Experience:
Advanced
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 20 questions Browse 20 questions and 93 answers
Why did you choose this?
Rockler Store
Amazing Compact Mobile Workbench<br />PROJECT PLANS
Dartagnan S on Jun 28, 2020
Great hose used where ever I use 2 1/2 hose
Bill E on Jun 4, 2020
Amazing Compact Mobile Workbench<br />PROJECT PLANS
Dartagnan S on Jun 28, 2020
Purchased to help with wood shop dust collection
Thane L on Jun 15, 2020
Great hose used where ever I use 2 1/2 hose
Bill E on Jun 4, 2020
needed ,& able to see any clogs
JOHN S on Jun 1, 2020
dust collection upgrade
Gary R on May 26, 2020
Connecting from my router fence to the dust collection port.
Curt W on May 25, 2020
This hose allowed me to complete the connecting of my dust collection system.
James P on May 21, 2020
Need this to attach to my table saw
Monica T on May 17, 2020
Making the router table a little more moveable.
Thomas S on May 15, 2020
need more hose to add the dust chute to my system. hope it works as well as the powertec that i usually use. fingers crossed
Aaron P on May 12, 2020
built a new dust collection system
Seth D on May 9, 2020
replacement
Brian W on May 4, 2020
I replaced
Santiago C on Apr 29, 2020
Easy to see if any plugs
Derrick P on Apr 29, 2020
You can see if you get a clogged tube.
John S on Apr 26, 2020
Added a machine to the shop
George on Apr 23, 2020
Connecting table saw with two collection points
Keith P on Apr 10, 2020
Saw on home built workshop YouTube video
Dan B on Mar 26, 2020
I needed more of this
Barbara J on Mar 12, 2020
See thru
Donnie on Mar 6, 2020
I have used before good quality
Mel H on Mar 2, 2020
To clean up my shop
Ronald H on Feb 29, 2020
Clean my shop!
cristopher h on Feb 23, 2020
clear makes it easier to see if it gets clogged
Richard H on Feb 22, 2020
not as heavy as the 4" and easier to use
Cathy H on Feb 18, 2020
For my shop
Nathan T on Feb 10, 2020
Needed it.
Peggy D on Feb 3, 2020
Building router table
William M on Jan 20, 2020
Use to connect to fixed 2.5” to 4” adapters on tools.
Josh Geiger T on Jan 12, 2020
Needed a new hose.
Don C on Dec 19, 2019
need it
Greg W on Dec 17, 2019
needed it to complete project
shane s on Dec 16, 2019
Same as above
Spry guy on Dec 6, 2019
Recommended on line
David Z on Nov 4, 2019
to add to my 2-1/2 inch sytem
Tom W on Oct 21, 2019
To add to present system.
ANTHONY D on Sep 28, 2019
for my router
isaac d on Sep 22, 2019
they work
Thomas G on Jul 27, 2019
My old Craftsman vacuum 2-1/2 hose was deteriorating.
JASPER F on Jul 1, 2019
What I have used in the past. Works well.
Tim K on May 31, 2019
Will attach to port on jobsite table saw on my mobile bench.
Duane P on May 4, 2019
This flex hose is so much easier to deal with when getting around corners.
Michael W on May 3, 2019
For Rikon 10-326 band saw
Stevan G on Apr 26, 2019
great hose fit good
ROBERT W on Apr 17, 2019
Need dual set up on router table
MARY C on Apr 6, 2019
Built combined workbench, needed ducting for router.
Bruce H on Apr 3, 2019
I needed a 2 1/2" flex hose
Richard Slay I on Apr 2, 2019
So i can connect the hose to my router table fence to the router table bucket
bryan g on Mar 25, 2019
Assured quality
Stephen B on Mar 18, 2019
I needed it
Andrew Stockard N on Mar 17, 2019
Purchased to help with wood shop dust collection
Thane L on Jun 15, 2020
needed ,& able to see any clogs
JOHN S on Jun 1, 2020
yes, you don't say in your description how long a section this is??????
A shopper on Jul 6, 2015
BEST ANSWER: If a person could stretch it with machinery, it might be 10'. But as it is, with normal human strength, it will stretch out to about 8'+, 9' if your lucky. Let's just say it is a "nominal" 10 footer, because it sure isn't an actual 10 footer!
Can the 10 ft. 2.5 inch clear flexible dust collection hose be cut into smaller sections?
Mike S on May 27, 2017
BEST ANSWER: Yes, but it's tricky to do. The wire needs to be cut with precision separately from the plastic housing
What's the best way to cut this hose?
Bradford T on Oct 16, 2017
BEST ANSWER: I used a pair of bolt cutters for the spring, and a box cutter for the plastic hose. It worked well.
Is this hose anti-static?
Scott K on Apr 9, 2016
BEST ANSWER: To my knowledge it is not advertised as anti-static.
Will this adapter work with the Rockler # 22784 - 21/2" x 10' hose?
photoguy88 on Jun 27, 2020
Clear Flexible Dust Collection Hose - 2-1/2'' Diameter
Clear Flexible Dust Collection Hose - 2-1/2'' Diameter
Rockler 2-1/2'' Screw End Hose Adapter
Rockler 2-1/2'' Screw End Hose Adapter
BEST ANSWER: Yes this adapter will work. Be aware that these flex hoses can be tough to slip over any fitting. Applying heat to the end your working will make life a little easier.
I'm looking for flexible hosing to build a spiral piggy bank. Would you easily be able to see the coins sliding down this hose?
Michele on Sep 30, 2016
BEST ANSWER: I think that would work. Over time it could get dirty from the coins.
Does this hose come in 1 inch also?
Lillie T on Apr 20, 2016
BEST ANSWER: In my shop I am using 4" and 2-1/2" on my cnc router shark I am not sure about 1" if not at rockler look at Home Depot on vacuum machine area they may have a 1" for the smaller portable shop vacs
What are the inside and outside diameters of this hose?
A shopper on Aug 13, 2015
BEST ANSWER: MY measurements are 2 25/32nds OD and 2 1/2 inches ID. Measurement taken with a Wixey Digital caliper.
Is the hose smooth in the inside?
Robert V on Jan 24, 2020
BEST ANSWER: not really. Its the same as the outside.
is the 2.5"the outside or inside diameter?
pete e on Nov 2, 2019
BEST ANSWER: 2.5" Inside diameter
Is this smooth on the inside?
Billy G on Apr 24, 2018
BEST ANSWER: No
need this kind of hose/tubing in 1" TO 1&1/4" INCH DO YOU HAVE IT OR SUGGESTIONS?
DICK R on Dec 9, 2016
BEST ANSWER: I don't have anything with that dia. not sure were you would get it. google it I guess.
2 questions. (1) What fitting(s) can I use to connect one end of this hose to my Delta table saw that has an exhaust port with a 2.475 OD & 2.230 ID? I would like to be able to disconnect the hose when not in use, so clamping it is not an option. (2) Will I be able to connect this hose with a clamp to a Rockler # 20129 2 ½" StableGate?
photoguy88 on Jun 28, 2020
Clear Flexible Dust Collection Hose - 2-1/2'' Diameter
Clear Flexible Dust Collection Hose - 2-1/2'' Diameter
Rockler 2-1/2'' StableGate™ with Bracket
Rockler 2-1/2'' StableGate™ with Bracket
BEST ANSWER: Yes, the hose (assuming 2 1/2" dia.) will connect directly to the 20129 with a clamp. First question, you will have to rely on a friction fit by just pushing the 2 1/2" hose over saw exhaust port or using a 2 1/2" to 2 1/4" reducer which would be a friction fit to the inside of you saw dust port.
how does this attach to a contractor table saw with a 2.5 opening? Does it require a fitting? If so, can you recommend a part #?
Frank G on May 21, 2020
BEST ANSWER: You will need a 4" To 2-1/2" Reducer Item #89195, 2-1/2'' Rubber Union item #45384 and 4" Spring Hose Clamp item #24385.
4
4" Spring Hose Clamp, Each
Dust Right®  2-1/2'' Rubber Union for Dust Collection
Dust Right® 2-1/2'' Rubber Union for Dust Collection
4
4" To 2-1/2" Reducer
Can this go on the outside of 2 1/4" fittings? I am pretty sure it would but just curious if anyone has used it as such. For instance my 2 1/4" shop vac hose fits in the inside of my Kreg Router table fence vacuum port and curious if this is flexible enough for an air-tight seal if this 2 1/2" hose is used over top of the port? Thanks in advance!
BobinNC on Apr 12, 2020
BEST ANSWER: It is a snug fit over 2" pvc which is 2-3/8" OD. It will need a hose clamp to make a tight seal over a 2-1/4" shop vac hose.
With what hoses is this compatible? In particular is it compatible with items #22784, #58342, #58350, & #56647?
BenSSE on Jan 28, 2020
Clear Flexible Dust Collection Hose - 2-1/2'' Diameter
Clear Flexible Dust Collection Hose - 2-1/2'' Diameter
Rockler 2-1/2'' Swiveling Hose Adapter for Shop Vacuums
Rockler 2-1/2'' Swiveling Hose Adapter for Shop Vacuums
Dust Right® 2-1/2'' Anti-Static Dust Hose
Dust Right® 2-1/2'' Anti-Static Dust Hose
Dust Right® 20' Heavy-Duty Shop Vacuum Hose
Dust Right® 20' Heavy-Duty Shop Vacuum Hose
Dust Right® 2-1/2'' Expandable Shop Vacuum Hose Kit
Dust Right® 2-1/2'' Expandable Shop Vacuum Hose Kit
BEST ANSWER: Should work fine. I’ve use it on rockler 2 1/2” expandable hose. No reason why it wouldn’t work on the hoses you cited.
needing longer 2.5 hose (20'), can I purchase? what is the part number?
Stephen B on Oct 10, 2019
BEST ANSWER: I had a problem on the shipping, I tracked it to Dallas and it never left to my address in Lubbock. So I never received my order, its supposed to work very well sorry
do you know what the i.d. of hose?
joe n on Jul 5, 2018
BEST ANSWER: The ID looks like 2 5/16
Does this have a 2-1/2" OD?

I want to clamp my 2-1/2" ID dust collection hose directly to it. Thanks.
Kevin on Jan 21, 2017
Clear Flexible Dust Collection Hose - 2-1/2'' Diameter
Clear Flexible Dust Collection Hose - 2-1/2'' Diameter
Dust Right® 4'' to 2-1/4'' Shop Vacuum Tool Port Adapter
Dust Right® 4'' to 2-1/4'' Shop Vacuum Tool Port Adapter
BEST ANSWER: It should fit.
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
More Suggestions