Overview
A massive selection of premium 2/83" thick veneers, all carefully sequence-matched, and neatly packaged in 3-Square-Foot hobby packs, an ideal size for jewelry boxes, humidors, door panels, marquetry and more. Available in Ash, Beech, Birch, Cedar, Cedar Spanish, Cherry, Figured Maple, Flaky Quarter White Oak, Mahogany, Pine, Plain Maple, Red Oak, Walnut, White Oak and a variety pack of domestic veneers. Sequence-matched veneer packs allow you to pair up sheets and create bookmatched veneer panels for the most beautiful, symmetrical grain patterns.
Frequently Bought Together
Questions and Answers
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 15 questions
Browse 15 questions
and 72 answers
Why did you choose this?
Rockler Store
Good variety of colors and the price was right
Jeff W
on Jul 19, 2017
This was the only source I found for this product.
KARL H
on Jun 22, 2017
Good variety of colors and the price was right
Jeff W
on Jul 19, 2017
Not sure of the wood veneer needed for project. Liked variety of veneers for minimal cost.
Debra G
on Jun 23, 2017
How thick is the veneer?
BEST ANSWER: A massive selection of premium 2/83" thick veneers
- Reply
- Inaccurate
- David Staff on Nov 17, 2015
which species of wood are in the "domestic variety" pack?
BEST ANSWER: Item #44841 includes one sheet of each of the following species: Cherry, Mahogany, Maple, Red Oak, Walnut, and White Oak
- Reply
- Inaccurate
- Steve Staff on Aug 26, 2015
Is 2/83" to thin for inlays?
I need one sheet that is one foot by one foot of mahogany veneer only?
BEST ANSWER: If you check the TECHNICAL DETAILS, you will see the sizes. You can piece the pieces together to get the coverage you need.
TECHNICAL DETAILS
2/83" Thick (.6096 MM)
Veneer sheet sizes range from 4-1/2" to 6-1/2" (W) x 12" (L).
Sheet count will vary to make up 3 square feet.
Sold in packs of 3 square feet.
TECHNICAL DETAILS
2/83" Thick (.6096 MM)
Veneer sheet sizes range from 4-1/2" to 6-1/2" (W) x 12" (L).
Sheet count will vary to make up 3 square feet.
Sold in packs of 3 square feet.
- Reply
- Inaccurate
- Gary S on Jan 20, 2016
- Purchased on Dec 31, 2014
Are the veneers paper backed, wood on wood with psa or plain wood on wood?
BEST ANSWER: Just wood through and through. I experiment: with glue on one side it seems to "curl" to that face, so flip the piece over and glue to the opposite side, does not seem to want to curl as much as the other...it does flatten when dry but more difficult to control if it curls to much....I have lots of aluminium headed pins to pin the piece in place. vic
- Reply
- Inaccurate
- Victor T on Jul 25, 2015
- Purchased on Mar 31, 2015
can this material be stained to match existing wood?
BEST ANSWER: Yes. Works best if you get the same species as you are trying to match ( e.g. mahogany veneer for mahogany lumber).
- Reply
- Inaccurate
- William N on Jun 27, 2015
- Purchased on Apr 10, 2015
I'd like to cut this veneer into very small stars for an US Flag I'm making. Would this be a good choice and what tool would you recommend for cutting?
BEST ANSWER: I did an inlay for a cutting board with a lot of small detail and we found a shop with a laser cutting tool. I drew up the design myself, but stars should be easy for a shop to draw up if you don't have software for it.
- Reply
- Inaccurate
- jonathan m on Jul 13, 2017
- Purchased on Jul 24, 2015
How many sheets are in a pack?
want to know if I can get a one foot by one foot square of mahogany veneer?
BEST ANSWER: Not from this SKU. You con get a contiguous 12" x 12" piece if you buy Item #: 37328.
24" x 32" Pressure Sensitive Veneer - Mahogany (Plain Sliced)
24" x 32" Pressure Sensitive Veneer - Mahogany (Plain Sliced)
- Reply
- Inaccurate
- Gary S on Jan 20, 2016
- Purchased on Dec 31, 2014
Is the veneer in 44841 pack raw or finished?
BEST ANSWER: I'm certain all veneer Rockler sells is unfinished. I've used everything from their burl packs to large sheets and have been satisfied with the quality.
- Reply
- Inaccurate
- MICHAEL B on Feb 7, 2017
- Purchased on Apr 13, 2015
What kind of glue should I use with the spanish cedar vaneer sheet?
BEST ANSWER: You could use contact cement or even a yellow glue like titebond.
- Reply
- Inaccurate
- Rick H Staff on Apr 1, 2016
I need some cedar veneer for laminating to the inside of guitars. Do you have anything suitable?
BEST ANSWER: Rockler carries some cedar veneer
Spanish cedar #37441 and #45798
Aromatic cedar #49343
Spanish cedar #37441 and #45798
Aromatic cedar #49343
- Reply
- Inaccurate
- Rick H Staff on Nov 12, 2015
how many 3 sq. ft. veneer packs will cover a tabletop 22-3/8" long x 18-7/16" wide? I would like to purchase white oak #44706-how much to order?
BEST ANSWER: The veneer sheet sizes in this pack range from 4-1/2" to 6-1/2" (W) x 12" (L). They therefore not be suitable for your 22-3/8" length.
- Reply
- Inaccurate
- Steve Staff on May 11, 2015
Do you have information on the hardness of the different veneers - domestic and exostic? Failiing that, the sub-species? I'm trying to hardness match to a south American Rosewood.
BEST ANSWER: Indian rosewood is used by many guitar makers. as you know south American rosewood is protected.
- Reply(1)
- Inaccurate
- Desi L on Apr 24, 2015
- Purchased on Apr 11, 2015
Reviews
4.8 / 5.0
29 Reviews
Walnut veneer
Ordered this for making ear rings and bentwood rings workers great am very happy with all aspects of purchase will be using rockler for my go to supplyer
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
handy size
Veneer was used to re-veneer old clocks and was a perfect size for small sized projects.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
love the thin wood
Believe it or not, it's hard to find good quality veneer. and book matched to boot. Looking good...several lucky guitars will be graced with this wood.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
A great buy
I love this product! I use it to form fingerboards, and it works great. Will be buying more soon!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Cherry Veneer
Very nice coloration and easy to apply to plywood for a rich expensive looking piece of wood. Price is fair for the veneer I bought. Easy to line up and match sides or ends
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
I Love These!
These were just what I needed for a small project. Worked like a charm. The price is definitely worth it.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
mahogany veneer
This was actually my first veneer project -- repairing an old library table that had a lot of water damage, but good structure. For the shallow, curved drawer fronts, I was able to steam-bend the veneer around a wine bottle which had just the right radius. For the gluing clamp, I used a lengthwise slice of pvc drain pipe. Blending the old finish with the new veneer worked very well with Minwax penetrating oil stain and some alcohol on a rag pad, as used in the final French polish finish. The species and grain of the veneer perfectly matched what was salvageable on this nice, hundred-year-old piece! The price incredibly low for the high quality of the product. Thank you again, Rockler, for a very rewarding project!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Good stuff
I bought it based on their description of the product. It fortunately fits my needs and features good quality. The pack is varied and the sheets have a good thickness.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Handy project item.
I made some backgammon boards from the walnut and burl maple. Was able to cut it with a large scissors.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
