$79.99 Kit
In stock
Adjustable steel boom arm holds a semi-cylindrical dust scoop that captures the dust—package also includes a chip deflector!

Dust Right® Lathe Dust Collection System plus Lathe Chip Deflector

Item #
54462
Rating:
90% of 100
Dust Right® Lathe Dust Collection System plus Lathe Chip Deflector
Dust Right® Lathe Dust Collection System plus Lathe Chip Deflector

Pen turners and spindle turners will instantly recognize the efficiency and utility of our Dust Right® Lathe Dust Collection System. The centerpiece of the system is our proprietary C-shaped ''dust scoop,'' which wraps around spindle turnings to catch dust right at the source. Add to that a highly adjustable solid steel boom arm support system and a flex-form hose to connect to your dust collection system, and you have an all-in-one package that will dramatically reduce the amount of dust in the air and on the floors of your shop. The boom arm assembly can be easily slid along the bed of your lathe to collect dust wherever you are cutting, and is height adjustable within a 15'' range. It can also be adjusted in and out along the slot in the plate, and pivoted at three points to provide an incredible variety of positioning options.


Features:

  • 9'' long dust scoop surrounds your spindle turnings for efficient, effective dust collection
  • Support system is constructed from heavy-duty steel for rigidity and durability
  • Included flex form hose fits the dust scoop without a hose clamp, and moves easily as the scoop is repositioned; opposite end fits standard 2-1/2'' O.D. fittings
  • System is compatible with most lathes

Package includes Lathe Chip Deflector to help redirect chips and debris away from the user!

The Rockler Lathe Chip Deflector helps to redirect chips and debris away from the turner's hands, arms, torso and face. When positioned correctly, the chips are guided into the dust scoop on the Dust Right® Lathe Dust Collection System. The result is less mess and less time spent cleaning up after turning. The deflector attaches to the post on your Lathe Dust Collection System via a sturdy steel attachment arm that is height adjustable with the included 3-star knob. From the attachment arm, an 8'' articulating arm lets you position the shatter-resistant polycarbonate deflector in front of the workpiece, and angle it for optimum effectiveness.

(1) 9'' Dust Scoop
(1) Port Boom Arm
(1) 15'' Vertical Mounting Post
(1) 15'' Adjustable Connection Plate
(1) 19-1/2'' Section of FlexForm Hose
(1) Hose Clamp
(1) Hardware Pack (includes all necessary hardware for connection and adjustment)
(1) Dust Right® Lathe Chip Deflector
More Information
Brand DustRight
Manufacturer Part Number No
Weight 7.0500
Tech Spec Lathe Dust Collection System:
  • Dust Scoop Overall Dimensions: 3'' dia. x 9''L
  • Dust Scoop Inside Diameter: 2-3/4''
  • Mounting Post Dimensions: 3/4'' dia. x 15''H
  • Mounting Plate Length: 15'' x 1/4'' thick
  • In-Out Adjustment Range (Slot): 6-1/2''
  • Dust Scoop Material: ABS plastic
  • Boom Arm Material: Steel
  • Flex Form Hose I.D.: 2-1/2''

Lathe Chip Deflector:
  • Deflector Material: Polycarbonate
  • Deflector Dimensions: 4'' x 9''
  • Articulating Arm Material: Steel
  • Articulating Arm Length: 8''
Technical Documents No
Type No
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
4.5 / 5.0
11 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
6
0
0
0
Nice christmas gift
This was a Christmas present for my sister I was completely satisfied with the tranaction
December 29, 2017
Purchased
10 months ago
Woodworking Experience:
Intermediate
Loving it!!
I love this thing, I am so glad I purchased it, the one thing I didnt expect was the size, this thing might work with larger items but if your going to work on Bowls, you need something bigger.
October 26, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
Dust collection system.
Works exactly as advertised, does great job of collecting dust.
February 14, 2017
Purchased
1 year ago
Has revolutionized my dust collection.
This is a very solid pair of tools. I bought these separately rather than as a package deal, but they work together great. If I had to be picky and complain, I'd say that the hose sometimes gets in the way of the end of the banjo while turning, but that's pretty minor. When I turn acrylic, I connect this up to my shop vac, and when I turn wood, I use my 4" dust collector, to keep the plastic separate from the wood (which I burn), and not only dust but a lot of the shavings get collected. I won't turn spindles or pens without this !
January 7, 2017
Woodworking Experience:
Intermediate
Nice!
Solid construction. Easy to move as needed. Great add on.
January 2, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
Dust Right® Lathe Dust Collection System plus Lathe Chip Deflector
It's very easy to install. Does not collect all the dust and chips but collects enough to make the purchase worth the cost.
September 9, 2018
Purchased
1 month ago
Woodworking Experience:
Beginner
Helpful Dust Collection Equipment
Great for doing spindle work or small pieces. It took me a while to get the hang of adjusting it correctly but it really does a nice job. I found that adding a drop of medium thick super glue to the screw that holds the boom to the bottom made a big difference in keeping the boom from becoming loose.
October 25, 2017
Purchased
1 year ago
Good device
I like the device but read comments that it works on a Powermatic 3520A. It does not I have to clamp it to it. Would be nice if it came with a larger base that the attachment screw goes in so it could work out of the box with PM.
February 10, 2017
Purchased
1 year ago
Woodworking Experience:
Advanced
Good performer but doesn't quite fit 3520b
Works very well. Used it with rigid shop vac (with the dust bag in place) on acrylic pens and it sucked most of the shavings in and then I toss the bag when full. This way the acrylic shavings don't collect in my laguna dust collector filter and smell up my workshop forever. Minus one star because the base is too short for the gap in my lathe base. Also they should have made that base in a square or circle so that every time you adjust the stand, the stand base doesn't twist off the lathe base. For an extra $.10 it would have been much more convenient for users
February 7, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
Lathe Dust Collection System
works great
December 28, 2016
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions Browse 6 questions and 4 answers
Why did you choose this?
Rockler Store
My husband just bought a new lathe. this is a gift.
Also I tried to sign up for free shipping over $35 and kept getting kicked out
Teresa K on Jan 31, 2018
I make pens on my lathe and want to position a dust collection device near my work.
Richard C on Apr 15, 2017
My husband just bought a new lathe. this is a gift.
Also I tried to sign up for free shipping over $35 and kept getting kicked out
Teresa K on Jan 31, 2018
Christmas gift for my sister she turns pens and bottle stoppers so it should reduce the dust in her shop
Marshall M on Dec 6, 2017
I make pens on my lathe and want to position a dust collection device near my work.
Richard C on Apr 15, 2017
Help with dust control when sanding
Stevie P on Mar 16, 2017
to capture spin offs from acrylic pens
tony m on Feb 13, 2017
Just bought a new lathe. Like receiving and viewing Rocker magazines. I feel this is a great price.
Manuel B on Feb 1, 2017
to use with my lathe
Tom H on Jan 20, 2017
To help reduce dust / debris when turning pens
Germputz on Jan 11, 2017
Dust is a major problem. I have tried other methods hat didn't work well.
Paul G on Dec 19, 2016
To help collect dust at the source.
J M on Dec 17, 2016
Keep dust down
Keith T on Dec 17, 2016
solves a problem I have been having
PAUL I on Dec 16, 2016
Quality and price.
Robert W on Dec 8, 2016
gift
Terry R on Dec 4, 2016
Christmas gift for my sister she turns pens and bottle stoppers so it should reduce the dust in her shop
Marshall M on Dec 6, 2017
Help with dust control when sanding
Stevie P on Mar 16, 2017
will the Dust Right® Lathe Dust Collection System plus Lathe Chip Deflector fit a Rikon mini lathe?
gerard c on Nov 29, 2016
Will this fit on a Jet 2112vs lathe?
Albert K on Dec 15, 2016
Will this mount on a Shopsmith Mark 5?
Russell L on Dec 11, 2016
Will this item work with a powermatic 3520 lathe?
grandman on Dec 1, 2016
BEST ANSWER: I have a Powermatic 3520 and can tell you first hand that the Dust Right® Lathe Dust Collection System is an excellent addition. It does exactly what it was designed to do. I especially appreciate it when turning deer antler. I'm hoping the chip deflector will be available by itself soon.
Does this fit the Excelcior mini lathe?
John A on Sep 3, 2018
BEST ANSWER: I have the dust right lathe dust collection system with the lathe chip deflector attached to my Excelcior mini lathe. It was easy to install and it typically works well for me.
Is it available without chip deflector? I saw the ad without chip deflector, for $39.99 on your web site few days ago.
Adiraju P on Jun 21, 2018
BEST ANSWER: The collector alone is Rockler item 52981
More Suggestions