$7.99 Each
In stock

Dust Right® Quick Connect 4" Hose Port

Item #
31512
Rating:
88% of 100

Connect 4" hose to your Dust Right® Handle with ease! Simply insert the small port end into 4" hose and secure with a clamp. Dust Right® Handle (sold separately) connects to the larger end. Dust Right® handle, hose and clamps sold separately. Blast Gate Bracket Item # 26813 (Sold Seperately) will also stabilize this hose.

(1) Dust Right® Quick Connect 4" Hose Port
More Information
Brand Dust Right
Manufacturer Part Number TAHP-4
Weight 0.3500
Tech Spec
  • Small Opening OD: 4''
  • Large Opening OD: 4-1/4''
Tech Docs No
Size 4"
Material Plastic
Type Tool Port
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
4.4 / 5.0
20 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
15
1
2
0
2
4” connector
Good product
July 24, 2018
Purchased
8 months ago
Woodworking Experience:
Advanced
facilitates dust collect.
I have my dust collector centrally located in my shop so I can connect it to whatever machine I am using. This connector make moving the DC attachment from one machine to another quick and easy.
March 10, 2018
Purchased
over 2 years ago
Woodworking Experience:
Advanced
Better Option than the Direct Connect Ports
These are cheaper and offer more options than the dust right ports that connect directly to the tool. They also don’t choke the air flow like the ones that connect directly to the tool. You can always use a few inches of flex hose (I also used HVAC tape) to still connect it directly to the tool if you don’t need the dust port elsewhere.
March 1, 2018
Purchased
7 months ago
Woodworking Experience:
Beginner
works as expected
January 3, 2018
Purchased
1 year ago
Woodworking Experience:
Intermediate
Helpful
I need a couple of these to allow me to use the quick connect handle on several tools. These adapters work great with the dust right quick connect handle. I don’t have anything negative about them. But what is with dust collection fittings all being slightly different and non compatible. Wish they would standardize!
December 8, 2017
Purchased
10 months ago
Woodworking Experience:
Intermediate
Excellent product.
The whole series of Rockler Dust-Right products seem to be very high quality and well made. More importantly, everything mates well with the appropriate products within the Dust-Right system. I no longer am trying to make do with cutting and taping fittings that almost fit. I have thrown it all out and gone to the Dust-Right system. Managing dust is now much more effective and fun!
October 8, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
Quick connect
It works great.
August 7, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
Excellent Product
Excellent product. Did exactly what I needed.
July 29, 2017
Purchased
1 year ago
Woodworking Experience:
Beginner
4" hose port
Use this on the end of my quick release handle when not in use,
Adding a cap allowed me to use one less gate on my central dust collection system
4" hose port on the end of my quick release handle
4" hose port on the end of my quick release handle
April 1, 2017
Purchased
1 year ago
Woodworking Experience:
Advanced
Works great. I no longer half to unscrew the clamp on the hose to switch my dust collector to another machine.
March 2, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 54 answers
Why did you choose this?
Rockler Store
I need it
John N on Jul 7, 2018
connect to dust collection system
Michael D on Dec 10, 2017
I need it
John N on Jul 7, 2018
Using to add tool to my dust right connections
Randy C on Jan 8, 2018
connect to dust collection system
Michael D on Dec 10, 2017
using this as an option to quick disconnect
Tomas N on Nov 28, 2017
This will be clamped in the duct port bracket with a hose attached on one end and the quick change handle can attach on the other end for a fast connection for dust collection.
Douglas D on Oct 31, 2017
Because I am adding to the Dust Right system that works so well
Foster M on Sep 27, 2017
same
John M on Sep 12, 2017
trying to make quick disconnects for shop tools
Merv on Aug 16, 2017
To connect 4" flexible hose to Quick Connect hose port
Robert B on Jul 28, 2017
I'm building my router table/enclosure and need this to attach my Dust Right quick connect handle.
Seth M on Jul 22, 2017
Mobile shop dust collection
nicholas r on Jul 17, 2017
Setup new dust collector.
Allen N on Jul 17, 2017
This quick connect hose port will save time when switching the dust collection system from one power tool to another.
Patrice on Apr 18, 2017
To help set up my dust collection system
Ken H on Mar 21, 2017
To make sure the dust right handle would fit
Tharemy H on Mar 9, 2017
needed to fit dust right
Kevin C on Mar 8, 2017
I chose this item to allow me to quickly connect and disconnect a 4" Clear Flexible Dust Collection Hose from my table saw to my PVC Dust Collection system
Stephen H on Feb 4, 2017
Husband needs this for his dust collection system
Vicki C on Jan 11, 2017
I can put these (I have more than one) on various power tools (band saw, disk sander, jointer, etc.) and have the ability to just move my dust right hose from tool to tool especially since I am in a small shop and all big tools are on wheels so they get used in the center of the shop for the most part and the hose can be centrally located.
Thomas M on Jan 4, 2017
Recommended
Timothy C on Dec 22, 2016
These adapt my Dust Right connector to 4" hose.
Umpire.20 on Dec 11, 2016
Used to connect dust right hose to blast gate
Daniel K on Oct 24, 2016
for dust system
Chris H on Oct 22, 2016
To connect 4" hose to woodworking tools with 4" outlets.
Joe E on Sep 22, 2016
To fit hoses together
Jerry E on Sep 18, 2016
To set-up dust collection system on table saw.
Gregory M on Jun 17, 2016
Until I can plumb in my dust collector, the Dust Right system makes it easy to change machines.
Bryan C. M on Jun 14, 2016
The small end of this connector is a good clearance fit for four-inch schedule 40 PVC pipe. I've used the rigid pipe to extend the dust ports of a couple of my stationary tools to accessible locations, and this connector makes the PVC pipe compatible with the Dust Right quick connector on the end of my dust collector hose.
Rob M on Jun 9, 2016
Shop refit
andrew r on May 31, 2016
price and review
Gary C on May 20, 2016
Required for use with the Dust Right handle.
Ned D on Apr 29, 2016
installing a dust collection system and looking for a connection between a Sch 35 (Sewer pipe) and a flex hose. Just trying different connections to find the right fit.
Robert R on Feb 27, 2016
To connect the hose from my table saw dust port to the Dust Right Quick Connect handle
Gordon Y on Feb 3, 2016
Needed to extend the hose that came with the dust collector.
Russ on Jan 24, 2016
Once you start using Dust Right. You keep using there various products.
RAYMOND W on Jan 23, 2016
adding dust collection to new tool and have dust right setup.
Terrence D on Dec 20, 2015
dust collection system in package is one fitting short to make it truly flexible
suzanne w on Dec 4, 2015
Addition to my dust collection system. Will improve my table saw dust collection system.
Raul E on Dec 3, 2015
I'm tired of fidgeting with my connections from jointer to planer to table saw. this will make changing connections much faster.
John B on Nov 4, 2015
Assist in connecting DustRight Handle to various tools. Bundled to get free shipping.
Timothy D on Sep 25, 2015
This was the wrong piece.
Dave M on Sep 3, 2015
I chose this product because I am in the process of putting together a Dust Removal System in my woodworking shop. It has been my experience that Rockler stocks good reliable components for that task. I chose to buy from Rockler because they go out of their way to help me when I need advice. They have been my "Go To Supplier" for the last seven years. I can always depend on their products to be of the highest quality, just like their customer service.
Dallas J on Aug 27, 2015
To use as a connection point for my Dust Right collector
Rob L on Aug 12, 2015
Help in setting up dust collection system. Ease of hook up.
Bob A on Jun 26, 2015
to adapt tools to dust right handle for quick, SIMPLE connections.
Tom B on Jun 22, 2015
I have a Dust Right system now and expanding it to another area.
Stephen D S on May 29, 2015
I plan to make a band saw shroud and want to use my quick-connect handle on it.
Darryl A on May 28, 2015
Needed to expand dust collection system
George K on May 15, 2015
Putting up a dust Collection system in my garageshop"
Bertyl G on Apr 7, 2015
Using to add tool to my dust right connections
Randy C on Jan 8, 2018
using this as an option to quick disconnect
Tomas N on Nov 28, 2017
Does this fitting's large, non-hose end insert into or fit over the non-rubber end of the 25516, Dust-Right 4" tool port?
gamelon on Jan 2, 2017
What is the OD and ID of both ends? I'm looking to connect a quick connect handle to a 4" elbow, and, in another application, a quick connect handle to a 4" TO 2 1/2" reducer.
Stephen K on Mar 26, 2016
BEST ANSWER: the OD dimensions are 4" on the smaller end. This is the end that will be connected with rubber, two band coupler. The larger end receives the quick connect handle. You will have to work backwards to get the correct fittings to reduce to the 2.5 fitting. The Rockler vac connection have made my shop much cleaner and enjoyable to work in. Good luck.
I am confused. If the hose connects to one end, what does the other side connect to? I am looking for something to put on the end of a hose and plug that into a dust right port on a machine. I know the handle does this but I do not really need the handle - just the ability to fit a connection.
JOEL W on Aug 4, 2015
BEST ANSWER: Me too!. I have a short hose connected to each piece of equip and one of these on each hose. The hose from my collector with the Dustright handle then just slips over this fitting on any piece of equip I want to use. Quick connect and disconnect and onto the next piece. Saves on hoses all over the place.
More Suggestions