$39.99 Pack
In stock

Folding Game Table Legs

Item #
22873
Rating:
84% of 100

These easy-to-install legs are perfect for picnic tables, display tables, card tables, ping-pong tables and more. They fold easily and include all needed screws and plastic floor protectors.

(4) Folding Game Table Legs
More Information
Brand Rockler
Manufacturer Part Number N/A
Weight 7.7000
Tech Spec
  • 1" tubular legs, height 28-1/2".
Tech Docs N/A
Hardware Type Legs
Prop 65 Warning WARNING Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov/product
4.2 / 5.0
25 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
13
7
4
0
1
Will Continue to purchase for my tables
July 30, 2018
Purchased
2 months ago
Woodworking Experience:
Advanced
Great Legs from Rockler
Legs were used on a 36" x 36" game / puzzle table for the family room. The legs are stronger than expected. An improvement would be a better finish on the folding mechanisms and legs
March 13, 2018
Purchased
6 months ago
Woodworking Experience:
Intermediate
Sturdy and stable leg set
These legs sets are very well made and strong.
Make sure your table top is thick enough for the screws provided.

Very reasonable price
July 24, 2016
Purchased
over 3 years ago
Woodworking Experience:
Advanced
Folding Table Legs
I purchased these legs install on a ping pong table for the inner legs. They were very easy to install. However, as one of the other customers stated, the hole closest to the leg is too close. When you fold up the leg, it hits the top of the screw and doesn't fold flat. I had to drill a hole further away. As a matter of fact, I drilled a third hole on both sides of the bracket for additional strength. These legs were about 5/8" shorter than the original outside legs of the table so I will have to find a way to extend them or put blocks underneath. This table is fairly heavy and the legs seem pretty sturdy.
April 13, 2016
Purchased
over 2 years ago
Woodworking Experience:
Beginner
Great folding table legs
I used these on a 4 ft octagon card table. The table is a heavy table and I was not sure if they would be strong enough. I am totally satisfied.......
March 16, 2016
Purchased
over 2 years ago
sturdy and solid
I've installed these legs and they work great. However, I overlooked one thing, the minimal dimensions for a card table w/ these legs should be at least 36 X 36 so they can fold flat onto the underside of the table.
June 9, 2015
Purchased
over 3 years ago
Woodworking Experience:
Intermediate
Great product, used for a table...
Great product, used for a table that weighs about 50 pounds and it holds up nice. may need to drill holes in the bracket depending on what your using for but very easy material to drill through.
March 11, 2012
For the money these are great...
For the money these are great table legs. They come packed in a large box with all the hardware for installation. The brackets that mount to the table have many mounting holes for various installation options. Not all of the holes will be used. Especially the hole directly under where the leg is hinged to the bracket. Putting a screw here will keep the leg from folding all the way in.
September 13, 2011
I bought these to use for...
I bought these to use for building display tables for our train club. We were previously using the Card Table Leg Brackets 63198 - but they were not as stable as the Folding Game Table Legs. The Folding Game Table Legs reduced the weight of our tables, cost to build, and provided all around better stability. I will slowly be retrofitting all 45 of our tables with these legs!
June 23, 2011
Hubby made some great tables using...
Hubby made some great tables using these legs. Nice and sturdy, they are a little stiff the first few times I've used them - think they will loosen up with use. Easy to put install.
April 10, 2010
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 8 questions Browse 8 questions and 27 answers
Why did you choose this?
Rockler Store
good product easy install
Miguel D on Jul 31, 2018
Legs to be used for a small work table.
Richard T on Mar 11, 2018
good product easy install
Miguel D on Jul 31, 2018
Looks like it suits my project
Rodger C on May 14, 2018
Legs to be used for a small work table.
Richard T on Mar 11, 2018
Robustness of design and legs fold flat out of sight when stowed.
Eric E on Dec 27, 2015
best option
Efrain F on Dec 9, 2015
WE have a ping pong table top that fits over a pool table.
WE sold the pool table and need legs for the ping pong table tops.
Perfect solution.
Gene N on Nov 16, 2015
We need a "extension " table at holiday time for our growing family, this will work great with table top my husband cut out!
mike d on Aug 28, 2015
Rockler matched and beat a price match! Great service
Eddy H on May 12, 2015
I chose this product because it had mounting capabilities for side mounts or top mounting. Others I looked at had mounting for side mounting only, which I could not use.
Mark M on May 5, 2015
Exactly what I needed for the job I was working on
Looks like it suits my project
Rodger C on May 14, 2018
Robustness of design and legs fold flat out of sight when stowed.
Eric E on Dec 27, 2015
What is the max weight capacity you would recommend for these?
And maximum size of table?

The table I plan to use it with has the following dimensions:
35.75 inches wide
47-70.5 inches long

Two removable leaves:
11.75 inches each

It's an older table from the 80's still in great shape and has a hefty weight to it (best guess - 20-30 lbs) + people leaning on it during a game. I lost the original metal legs and brackets and the replacement wood one's we built for it aren't holding up.
Jonathan A on Feb 29, 2016
Folding Game Table Legs
Folding Game Table Legs
Adjustable Table Leg Set (Set of 4 Legs)
Adjustable Table Leg Set (Set of 4 Legs)
BEST ANSWER: I had a very nice desk top I had saved from a desk that the legs, hutch and side pieces got damaged by movers but I kept the top. I needs a cutting work table for my sewing room. It had to be lower than an average table. Bought a set of these legs as they can be set at several heights. They worked great for that and made a very nice sturdy table. It is about 5 ft long by 30 inches wide and very heavy wood. I have used several sewing machines on it at one time and several of them are very heavy. It does not bow down and these legs are very very sturdy.
The two pictures for this product shown legs which are different. The table is shown with tapered metal aluminum brushed legs, the detail picture of the leg is shown as tubular and black. How is in reality?
Petre Dan on Aug 28, 2015
BEST ANSWER: They are tubular and black - not tapered. The set comes with the four legs, screws (four per leg) and four rubber feet that fit on the bottom of the legs. I have bought probably 50 sets over the last few years for an active train model train club to use on our club tables. Quality has always been good and I have never received a set without all the materials in it. Hope that helps.
how big (in inches, l x w ) are the upper brackets that hold the leg to the table? Can they be screwed straight up into the table top?
Jerry S on Sep 10, 2015
BEST ANSWER: They are 7 inches long on each side (l shaped) and they are 1 inch wide on each side. They screw easily into a table top but make sure it has at least an 1 1/4 inches lip around the table to hide them.
How thin can the table top be? I have a plastic one that's 1/2 inch thick.
Mahmoud M on May 7, 2017
BEST ANSWER: Hi Mahmoud, I think the question you'd need to ask yourself is whether the fasteners you'd need to use to attach the hardware would actually hold in 1/2" plastic. Although I haven't see the material itself, my guess is that 1/2" is pretty risky. You'd need to use the absolute longest (probably 1/2") screws that will not penetrate the top, and also of the largest gauge. But no matter how you do it, 1/2" is just not much material to screw into to support a leg.
what is the minimum size table i could make with these legs ? Can i use them on a table 30X30 and have the legs concealed underneath ?
Jose M on Oct 18, 2015
BEST ANSWER: Hello Jose,
I would recommend creating the table slightly bigger than that
30 inches will not leave you enough room I would recomend at least 31 X 31 this should give you about 1/2 inch of clearance given you use 3/4 inch edging on your table. Hope that helps answer your question.
Are these legs suitable for use on an outdoor table that may sometimes be left out in the rain?
Larry S on Jul 24, 2016
BEST ANSWER: Hi Larry,
the table legs are painted and would take a bit of moisture from time to time. I would recommend coating them possibly with some exterior wax of some kind that will help reduce the chances of rust. I'm not sure how long in continuous weather they will hold up but are a very well made leg set. The other thing is to just repaint them from time to time with a rust inhibiting paint. wiping down with lacquer thinner before repainting if you've waxed as well. this will allow the paint a clean surface to adhere too. Hope this helps.
How do these legs fold? To the table center or along the edges and if so which way, left or right?
CampingYurts.com on Jan 20, 2016
BEST ANSWER: They fold along the edges. If you have the table legs up in the air, I believe they fold to the right. I don't have any of the tables in front of me at the moment, so I am going off memory.
More Suggestions