$21.99 Pair
In stock

Heavy Duty Corner Levelers

Item #
31217
Rating:
88% of 100
Heavy Duty Corner Levelers
Heavy Duty Corner Levelers

Lift and level even large cabinets or furniture with these heavy duty corner levelers. Stability is assured! Simply mount under cabinet edge or in a kerf, then adjust with a height range of 1" using an Allen wrench (sold separately) through a hole in the cabinet floor.

(1) Pair of Heavy Duty Corner Levelers
More Information
Weight 1.1000
Tech Spec
  • Load capacity is 330 pounds each
  • Thread size is 3/8", 16 tpi
  • Minimum installation height required is 3"
  • Foot measures 2" diameter, Bracket is 1-1/2" high and 5" long tip to tip
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
4.4 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
3
0
0
0
They work great on my mobile outfeed / assembly table.
October 15, 2018
Purchased
7 months ago
Woodworking Experience:
Intermediate
I used these leveler brackets to...
I used these leveler brackets to level a big screen TV cabinet. The levelers were easy to assemble and worked great.
August 16, 2008
Heavy Duty Corner Levelers
These are, as advertised, heavy duty! Used them to make an adjustable outfeed table for my table saw. They worked well on a heavy duty base (with some minor modification to the mounting holes). Adjustability for height and level with 1/4 in allen wrench made them perfect for the job.
January 2, 2019
Purchased
5 months ago
Woodworking Experience:
Intermediate
Built an out feed table/workbench for...
Built an out feed table/workbench for my garage using 2x6 and 2x4 standard lumber for legs 2x6 on long side/2x4 on short side to allow for a bit more storage space underneath! 2x6 for strength and 3/4" ply for top. My garage can puddle water and I wanted to make sure the table legs would not wick water but also have strength.I would have liked to see the lip extend a bit further the part that goes under the cabinet/workbench. In 2by lumber the screw hole is too close to the edge causing the screw to strip out/go in wrong/basically not do anything. I'd imagine that would be the same in any material.I mortised out the 2x6 and 2x4 I used for the legs hoping that would give it more support but in the end it made no difference, just made more work for me.Allow at least 1/4" on your project to allow for these levelers.I've pounded on my workbench and the legs don't seem to care. With a load capacity of 300lbs per leveler they are perfect for what I needed.
November 21, 2010
I use these brackets to level...
I use these brackets to level the 2 x 4 pressure treated framing for cabinets on a slightly sloped concrete floor in the garage.
August 4, 2008
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 10 answers
Why did you choose this?
Rockler Store
I am making a pair of frame less base cabinets that when joined together will be five feet long. I wanted heavy duty adjustable support.
Rhett D on May 10, 2019
workbench
Robert M on Mar 17, 2019
I am making a pair of frame less base cabinets that when joined together will be five feet long. I wanted heavy duty adjustable support.
Rhett D on May 10, 2019
to raise a platform bed off a carpet
Ronald S on Apr 16, 2019
workbench
Robert M on Mar 17, 2019
I used this to level a work table in my shop. Works great!
Russell C on Feb 19, 2017
It's heavy duty, the only ones on the web.
Thomas S on Nov 29, 2016
Using these on a heavy "table-top game" table design and needed something a little sturdier than the typical screw-in levelers to prevent tear out on the ends of the legs from lateral forces.
Carl D on Nov 7, 2016
I had some shop tables that needed levelers
DAVID C on Sep 19, 2016
I wanted it
hardy h on Aug 10, 2016
I needed 2 more and its a great product
Backyard Woodworking on May 24, 2016
Purchased for a new table saw work bench that will be build.
Thomas S on Apr 19, 2015
to raise a platform bed off a carpet
Ronald S on Apr 16, 2019
I used this to level a work table in my shop. Works great!
Russell C on Feb 19, 2017
Is there a three-view drawing available of this product? I'm interested in determining how much of the horizontal plate will extend under the cabinet (or, alternately, how deep the kerf would need to be cut to accommodate the same horizontal plate edge).
Jeff B on Feb 1, 2017
what is the x y position hole for wrench?
casey j on Sep 2, 2018