$25.99 Pack
In stock
It's easy to lift and level furniture pieces up to 800 pounds (per set) with these threaded leveling feet. A hex wrench allows adjustment from the top side.

Heavy Duty Lifting Leveler

Item #
94% of 100
Heavy Duty Lifting Leveler
Heavy Duty Lifting Leveler

Lipped mounting bracket works to lift and creates greater stability. Each leveler has load-bearing capacity of 800 pounds per set.

(4) Heavy Duty Lifting Levelers
More Information
Weight 1.2500
Tech Spec
  • Adjust to within 2-1/4"
  • Minimum installation height is 3"
  • Requires 5mm hex wrench to adjust
  • Foot measures 1-1/4" diameter
  • Bracket dimensions: 2-1/8" H x 2-1/8" W with M10 X 1.5 threaded post
  • Attaches with #10 x 3/4" screws (included)
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

4.7 / 5.0
105 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Solid, reliable levelers
I've used these on several projects when I need to support and level heavy carcases. Can't beat 'em. If you have a heavy (and tall!) book case or other casework that needs to rest level on anything other than a dead-flat concrete surface (e.g. carpeting, any uneven surface, etc.), and you aren't looking to use shims, then these are just the ticket.
February 16, 2019
1 month ago
Woodworking Experience:
Sturdy and easy
These were really easy to install on the workbench I just built. Put 8 of them down to handle the fact that my garage floor lifts up a bit at the edges. It was nice that they come in a 4 pack so I only needed two packages. Once they were attached and all of the feet touching the floor I could put a hex bit in a drill to put the torque in to raise them till my workbench was perfectly level.
January 19, 2019
2 months ago
Woodworking Experience:
Outfeed table leveling
I was not sure if these would be functional for an outfeed workbench/assembly table. But found them very easy to install, land level the table. They seem to be holding up well and I am completely satisfied.
January 18, 2019
2 months ago
Great leveling feet.
Well made, heavy-duty leveling feet
January 5, 2019
3 months ago
Woodworking Experience:
Provides a solid base for my mobile planer
I installed these on a cabinet for my mobile planer along with some casters. The casters provide mobility, but were prone to moving a bit while in use. These levelers provide enough lift to take the weight off the casters and provide more solid footing while the tool is in use.
December 23, 2018
4 months ago
Woodworking Experience:
Perfect.  Garage floor is slopes outward, these leveled my workbench.
Perfect. Garage floor is slopes outward, these leveled my workbench.
December 14, 2018
3 months ago
Woodworking Experience:
Insane how sturdy these are
October 20, 2018
5 months ago
works advertised
the only thing missing was locknuts to prevent movement after adjusting. I added my own. now perfect
August 20, 2018
7 months ago
Woodworking Experience:
I have a slightly uneven floor in a very small shop, and every surface needs to be multi-purpose. With these, my outfeed table and bench can all be the exact same height as my table saw, plus they make it easier to scoot the table a bit if you need to. They stay put when you want them to but if I need to drag it a few inches it's much easier than when I had it on the wood legs. They're very easy to adjust and install - just what I needed!
May 29, 2018
10 months ago
Woodworking Experience:
I’ve used these on a couple of different cabinets and they work well. I like the lip to put under the edge of the cabinet so the weight of the cabinet isn’t completely on the screws
May 6, 2018
over 2 years ago
Woodworking Experience:
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 15 questions Browse 15 questions and 80 answers
Why did you choose this?
Rockler Store
Work area unlevel
Kent H on Mar 20, 2019
in conjunction with the workbench casters, these should help level a bench when the casters are retracted.
Terry S on Mar 10, 2019
Work area unlevel
Kent H on Mar 20, 2019
Heavy duty application and can be hidden underneath bench or cabinets.
Duane R on Mar 20, 2019
in conjunction with the workbench casters, these should help level a bench when the casters are retracted.
Terry S on Mar 10, 2019
just built a new work table and need to level up to the table saw
Jesse M on Mar 7, 2019
Load Capability
Samuel N on Mar 6, 2019
Building grandfather clock and wanted extra strong, stable adjustable feet to set level. A lot of $$ in movement, etc. to skimp here.
Milton K on Mar 3, 2019
Level my new workbench
Matthew B on Feb 19, 2019
They seem like they are exactly what I'm looking for to stablize my work table in my wood shop
zbish on Jan 27, 2019
to level my work bench in the garage!
Glenn s on Jan 5, 2019
Leveling out my big work table on a sloped garage.
Eric M on Jan 2, 2019
I have used them on previous application for my work tables, and they are excellent for insuring a level work surface.
Harold J on Jan 1, 2019
This will be perfect to level my workbench that has castors.
Greg D on Jan 1, 2019
used them before,work great
gordon t on Dec 27, 2018
Making a portable compressor cart from a two wheel truck...these will keep the platform
Gregory A on Dec 22, 2018
Great reviews
Donald P on Dec 14, 2018
I've used these levelers before. This batch will level and stabilize two mobile saw carts.
Rob M on Dec 10, 2018
Most substantial leveler I found.
JimL on Dec 4, 2018
This lever were exactly what I needed to rise my drawing desk, the weight capacity is a little more then I need, but more is better then less
Ronald S on Dec 1, 2018
To level a boat building frame on my uneven garage floor
Robert J England E on Nov 28, 2018
building a mantel side cabinet on an uneven floor i am using these adjust the height and to level the cabinet
michael d on Nov 28, 2018
To adjust the outfeed table on my table saw to just the right height.
MICHAEL M on Nov 25, 2018
they work great! I make custom shuffleboard tables and I use these on the bottom in case the clients house does not sit level
Ryan M on Sep 10, 2018
I receive your catalogue
Glenn H on Aug 19, 2018
thomas c on Jul 28, 2018
looks like a solution to my problem. I only needed one but will probably find a use for the other 3 eventually!
Guy P on Jun 30, 2018
Need levelers for cabinet. Description and reviews look good, so will try these.
Gene S on Jun 27, 2018
Needed these for a large bathroom cabinet with a slightly unlevel floor.
James R on Jun 11, 2018
Problems installing a Shaws Original country sink under existing granite slab counter top. The levelers should make for a better installation and a better seal between the two surfaces.
BRIAN S on Jun 2, 2018
needed for project
Daniel F on May 30, 2018
Use for making tool tables.
Gordon N on May 23, 2018
Shop floor uneven, needed for bench and outfeed table
Ian B on May 4, 2018
Just what I needed to stabilize a portable bar
Tom L on May 4, 2018
built a new assembly/off cut table
Mike on Apr 21, 2018
The SawStop ICS doesn't have leveling feet (best saw ever, except for that one oversight)...
These feet support a lot of weight, look easy to adjust, and have a nice lip at the bottom to hook under the base cabinet.
SteveK on Apr 15, 2018
Looks like what I need for the job
Gail S on Apr 11, 2018
I have used them before. Great product, great price.
Robert D on Feb 8, 2018
Need for a table saw stand
Donald T on Jan 28, 2018
Need it!
DAVID P on Jan 10, 2018
This is what I was looking for
wayne c on Jan 8, 2018
Used these in the past and with my very uneven shop floor they are a God send.
SHANNON T on Dec 21, 2017
Needed for leveling shop cabinets
J B on Dec 9, 2017
Leveler for the bookcases.
Floyd B on Dec 7, 2017
This item has a very good review rating and can handle the weight required for the shelving units I am building.
Rick B on Dec 6, 2017
Need for a project.
James L on Dec 1, 2017
a solid permanent solution
James B on Nov 2, 2017
These are the best levelers for cabinets. We use them all the time in our business and for personal use.
Esther F on Oct 23, 2017
to make a level platform for my washer and dryer.
Michael R on Oct 18, 2017
Load rating and ease of use.
Pamela R on Oct 11, 2017
it looks solid and strong
Gregory D on Sep 28, 2017
To use on a bookcase that has to slide into a tight space
Cynthia C on Aug 20, 2017
Heavy duty application and can be hidden underneath bench or cabinets.
Duane R on Mar 20, 2019
just built a new work table and need to level up to the table saw
Jesse M on Mar 7, 2019
How many feet are in a pack?
A shopper on Jul 16, 2015
How many come to a package?
Wayne T on Jan 24, 2016
BEST ANSWER: If I remember correctly, there are four(4) to a package, and are well worth getting.
are these suitable for outdoor, all weather use? (leveling off a large wooden kitchen-table structure on a patio that will be exposed to water, snow, temperature variations, dirt & debris etc.) ?
JohnG on May 25, 2017
BEST ANSWER: This product is made of zinc and would not hold up very well in an exterior application
I only need 1 for my project. Can't buy them individually?
David N on Jan 22, 2016
BEST ANSWER: I don't think so. They come 4 to a package.
Instead of a fixed foot, could there be a heavy-duty locking caster you could raise and lower
So you can move device, level it, and lock so doesn't move around?
dtbennett on Nov 21, 2015
BEST ANSWER: Yes, there is a set of heavy duty locking casters that can be used along with these adjustable levelers. Take a look at Rockler item #43501, Rockler Workbench Caster Kit 4 Pack.
You can use the locking casters to raise your project to move it and then lower your project back onto the adjustable levelers when you want it to sit firmly on the floor. The levelers could be hidden inside the base of the project or behind a leg and the casters mounted on the outside of the base or legs. Each caster has a load limit of 100 lbs. while each leveler has a load bearing capacity of 600 lbs.
What is the measurement/distance between the mounting holes side to side (horizontally)?
Don K on Oct 8, 2015
BEST ANSWER: 1 5/8" center to center
Would this be ok to put on the leg of a bed (2"x2")?
A shopper on Aug 17, 2015
BEST ANSWER: They should be fine
I see it's 2 1/8 H by 2 1/8 W, but what is the depth?
Warner R on May 2, 2018
BEST ANSWER: With leg fully retracted, the unit is The leg can be extended a maximum 2-3/16" from the bottom lip if you like being a stilt walker. From the lip edge to the outside of the foot is 1-13/16", or 1-5/8" from the side surface you are mounting it to.
thinking of using these under an aquarium stand. Can they really support 600 lbs each? Aquariums are HEAVY.
Mike L on Apr 4, 2018
BEST ANSWER: I installed my levelers under a very heavy oak TV cabinet and they work great, with little effort needed to adjust for level/height. It doubt the cabinet weighs 600 pounds though, but you'd have to have a pretty large aquarium to reach that sort of heft; something that would hold 9 cubic feet (or 70+ gallons) of water.
what is the rated load capacity for these feet?
Cal F on Jul 25, 2017
BEST ANSWER: 600 pounds each
This is in regards to product Item #: 81239
I would like to know what is the lowest that this can go, from the floor to the lip?

I have an already established aquarium/cabinet and had recently noticed there is a slant and was hoping to get something to lift up the cabinet.
There is minimal room from the floor to the base of the cabinet, I'm guessing at the moment I have between 1cm to 2 cm and was hopping to find a tool to lift the cabinet up without having to take everything out of the aquarium.
Calvin L on Oct 17, 2016
BEST ANSWER: The lip resting on the floor IS the lowest you can go. The leg can be retracted lower, but the lip will be the limiting factor. You can mortise the base to revive the lip so the lip is flush with the base (like a hinge plate in a door jam).
Will this work to mount and brace a four feet African sculpture if anchored at the back of sculpture? My question is about Item # 81239
Milton K on May 2, 2016
BEST ANSWER: Strength wise, yes! How you would attach would be your challenge. We used ours on a piece of equipment. Great quality!
I need something to level my SawStop ICS. Would these be suitable for machine leveling feet if I used bolts instead of the supplied screws?
SteveK on Apr 15, 2018
How are the four loose plastic caps used with these levelers? They are too small to cover the top allen wrench insert. I like the strength and design of these levelers, but after install mine seem to have a small amount of play in them when I wiggle my workbench. Am I missing something? Thanks!
Scott E on Jan 4, 2017
More Suggestions