$9.99 Each
In stock
Quickly rout the mortise required for our 3-5/8''W Rectangular Recessed Pulls (#44138 and #46775, sold separately).

JIG-IT® for 3-5/8''W Rectangular Recessed Pull

Item #
52249

Use to rout out the mortises required at the back of our recessed pulls. Just adhere the template to the drawer front with Double-Sided Turner's Tape (#25801, sold separately), then use your router with a guide bushing to rout out the space. The template even includes a depth gauge for the router bit depth setting.


Features:

  • Edge of template features depth gauges for the two router bit depth settings
  • Laser etchings ensure easy alignment and setup
  • Clear acrylic for visibility of reference lines on the workpiece
  • This jig is for surface-mount installation only. Does NOT include a template for flush-mount installation.
(1) JIG-IT® Routing Template for 3-5/8''W Rectangular Recessed Pull
More Information
Manufacturer Part Number 52249
Weight 0.1500
Tech Spec
  • Model #: RP4
  • Material: Clear acrylic
  • Compatible Pulls: 3-5/8''W Rectangular Recessed Pulls (#44138 and #46775)
  • Required Guide Bushing: 7/16'' O.D. (#63065, sold separately)
  • Required Router Bit: 1/4'' Diameter straight (e.g. #49975, sold separately)
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Why did you choose this?
Rockler Store
To use in a floor panel in a closet to remove and replace the panel. I want something flush that is strong enough to lift moderate weight.
Steve C on Nov 23, 2018
To use in a floor panel in a closet to remove and replace the panel. I want something flush that is strong enough to lift moderate weight.
Steve C on Nov 23, 2018