$79.99 Each
In stock
Advanced push block provides unrivaled safety and control over both the keeper and the waste piece—ideal for ripping thin strips.

Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200

Item #
96% of 100
Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200 Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200 Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200 Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200 Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200 Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200 Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200 Micro Jig GRR-Ripper - Get A Grip! Video Micro Jig GRR-Ripper video
Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200

This advanced model of the GRR-Ripper boasts all of the same innovative features of the GR-100 but comes with two additional accessories (see below) that improve the control and expandability of the GRR-Ripper System. The Micro Jig GRR-Ripper Advanced 3D Pushblock (GR-200) is designed to feed your workpiece more safely and more accurately than with conventional push blocks, resulting in intact fingers, less burning and less waste. With its 3-Directional control, it gives you downward, forward, and lateral pressure on the stock for maximum control. Since it acts as a movable blade guard that travels with your hand, it provides an additional safety buffer between the blade and your hands. Whether you are making razor-thin veneer strips, building miniatures, or creating exquisite furniture you will save time, materials, and fingers with the GRR-Ripper.

The GR-200 includes additional accessories. The Adjustable Spacer adds increased gripping surface for tackling larger stock. It also adds one inch of cutting width to the GRR-Ripper and acts as a secondary balance support for small stock and straight-line ripping. Great add-on for working on the router table, and eliminating snipe. The Stabilizing Plate adds a new dimension of control to the GRR-Ripper. It is particularly useful when cutting small narrow pieces of stock. Perfect for trickier cuts like resawing, bevel edging, pattern routing, and much more. The Stabilizing Plate also acts as a secondary fence that travels with the GRR-Ripper along the left side of the stock. It holds the off-cut piece in its original position through the entire cutting operation. Some users call it a "Feather Board Plate," but unlike a featherboard, it exerts no sideways pressure. Instead it simply holds the drop-off piece in position as it travels past the blade, preventing binding.

(1) Micro Jig GRR-Ripper Advanced 3D Pushblock
(2) Side Legs (1/4" and 1/2")
(1) Adustable Center Leg
(1) Adjustable 1" fence-side space
(1) Stabilizing Accessory Plate with Balance Unit
(1) Instructional DVD
(1) Comprehensive Users Manual
More Information
Brand Micro Jig
Manufacturer Part Number GR-200
Weight 2.5500
4.8 / 5.0
121 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
I am a beginner at woodworking and this tool is perfect for me, it keeps my hands off the wood that I am ripping no matter how small is the cut, thank you.
January 9, 2019
1 month ago
Woodworking Experience:
Versatile, functional and safe
Great product, exceptionally functional and useful across many pieces of equipment. Would highly recommend!
January 7, 2019
1 month ago
Woodworking Experience:
Fantastic and wonderful accessory. Improved safety for all projects. A must have component to any woodworkers arsenal.
January 3, 2019
1 month ago
Woodworking Experience:
Don't make narrow rips without this!
This essential tool makes narrow rip cuts about as safe as they possibly can be. You should think of this safety item as a "rolling blade guard". It firmly grips the piece being ripped and creates a stable platform for your hands above the blade, throughout the cut. It guards your hands from a saw blade accident and it also reduces the chance for kickback as you can make a firm, confident push through the entire length of the workpiece. No fumbling with or for a push stick.

It takes time to work out how to use it. It is not simple but it is not overly complicated either. It is well worth a lifetime of safe rip cuts to take time at first to learn how to use the GRR-Ripper. Watch the videos carefully and then set up various pieces and view the GRR-Ripper in relation to the blade before ever turning on the saw.

An essential accessory is the Gravity Heel Kit. This should be the first thing you buy with your GRR-Ripper. Buy this with the GR-200 rather than get the "Advanced", which you can purchase later as you become familiar with the tool. These help tremendously with push stability and are designed to be sacrificial, saw through it with the blade.

Sight down the GRR-Ripper before every cut to ensure that you have lined up the legs properly. After that, it is pretty easy to confidently set up with speed.

Remember, don't make narrow rip cuts without it. I even make wider cuts with the tool because the confidence it gives you in doing a correct speed push through the blade really minimizes kickback risk.
December 24, 2018
Woodworking Experience:
excellent construction,functional and much safer
Well made and worth the price.
Performs as intended, and makes cutting smaller pieces much less stressful.
I've used with table saw and jointer, and expect it to well with the band saw.
Don't choke on the price, you will be happy with it.
December 6, 2018
2 months ago
Woodworking Experience:
GRR-Rpper GR-200
Great product for use on my table saw. I feel more in control when pushing material through the spinning blade. I also have the adjustable handle which gives me more control in securing the material against the fence I would recommend the GR-200 to anyone who wants to gain more control during cutting or routing projects.
November 21, 2018
3 months ago
Woodworking Experience:
Innovative, well engineered
When I first saw a Grr-Ripper demo some time ago, I thought, this is a pretty cool push block, having lots of configuration options, and the ability to cut very small wood pieces safely. But the price kept me away - until recently. I got one as a gift and started using it, googling all the different configs and techniques, and trying it as often as I could. While it exceled in handling small pieces, long pieces were a challenge. After I bit the bullet and bought GRR-Ripper number 2, I got a handle on (no pun intended) how to use both on long boards using a leapfrog technique.
The price still stings - slightly. But I don't have regrets in getting 2 blocks along with the 1/8 side pieces. They've been working great for me, both on the table saw and my router table.
October 26, 2018
3 months ago
Woodworking Experience:
Micro Jig GRR-Ripper® Advanced 3D Push Block System GR-200
This tool is great I have used it a few times still learning the in’s & outs of the Ripper. Only problem I have is the tool is way to pricy could be priced less & still make a profit. But it’s design is a great limb saver! ????
October 26, 2018
3 months ago
Woodworking Experience:
great product
this makes cutting thin pieces a breeze. don't know how i got along without it all this time!
October 25, 2018
3 months ago
Woodworking Experience:
I like this unit. This seems like a lot of fuss for a push block but it really does work better for holding small items against the fence and moving smoothly through the saw.
October 20, 2018
3 months ago
Woodworking Experience:
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 65 answers
Why did you choose this?
Rockler Store
Safety and work piece precise movement.
Louis on Jan 12, 2019
Kenneth T on Jan 2, 2019
Safety and work piece precise movement.
Louis on Jan 12, 2019
Howard S on Jan 12, 2019
Kenneth T on Jan 2, 2019
Extremely useful - Very versatile - Excellent reviews on line
Jonathan D on Jan 1, 2019
Kathy A on Jan 1, 2019
Nathan B on Dec 26, 2018
Narrow ripping safety
Robert R on Dec 23, 2018
Sale price and concern for safety. A good buy.
Harry on Dec 21, 2018
I would like to keep my fingers
Donna P on Dec 20, 2018
John J on Dec 17, 2018
Great deal
Duward H on Dec 16, 2018
Is on my husband's Christmas list.
Janeen S on Dec 13, 2018
Safety first!
George S on Dec 9, 2018
The safety aspect.
Richard S on Dec 5, 2018
I was looking for a safe way to route small parts without losing a finger.
Dcwik on Dec 4, 2018
I picked this as a gift for my boyfriend, I recently bought him a new table saw and I wanted him to have a safe push block Instead of the whimpy push sticks that you can order online.
Brandie on Nov 30, 2018
For the safety.
Rodney G on Nov 24, 2018
Safety in making small cuts
THOMAS A on Nov 24, 2018
son in law wanted it
Sheryl A on Nov 18, 2018
I have a GR-100 and decided to add the GR-200 to the stable. Great products.
STEVEN W on Nov 10, 2018
I ordered this to be able to cut small parts more safely and with greater accuracy.
Arlen F on Sep 10, 2018
To keep my fingers
Bill H on Sep 2, 2018
for safety mostly table saws
John G on Aug 17, 2018
The vid really helped me decide to stay safe on my table saw. Can't wait to use it.
Jamie G on Jul 27, 2018
These things are great! This is my second one, and I am looking forward to the new features this one has. They add a lot of control over cuts, especially with smaller pieces.
Michael P on Jun 5, 2018
Safety from spinning blades and kickback on table saws.
Sandy S on May 23, 2018
Already have one and like how it provides safety when using with my table saw and router. Wanted another one to work more safely with long pieces of lumber when sawing.
John G on May 16, 2018
Father's Day Gift
Bonnie J on May 4, 2018
Steve B on Apr 19, 2018
frances s on Apr 6, 2018
Had a recent close call with kickback while ripping wood on my table saw and decided my body was worth the investment.
Mark P on Apr 6, 2018
I am buying this on recommendation from friend and after watching the video can not wait to get it in my shop.
Don R on Apr 5, 2018
This is my second GRR-Ripper 200. Two are better than one - looking forward to using them in leap-frog fashion when ripping longer stock on my table saw.
John K on Mar 12, 2018
Safety of my hands is most important
STEVEN L on Feb 3, 2018
I needed the second gripper to walk wood through the table saw
Laurence B on Jan 31, 2018
Ease of use and safety
Angela K on Jan 19, 2018
safety on the table saw and router table
Bob B on Jan 17, 2018
Looks like a safe tool to use for the table saw
Dave H on Jan 1, 2018
Research of reviews and coments.
Colin B on Jan 1, 2018
Safety, It looks like it would save me another bruised arm like I got a few weeks ago. Caused by kickback while ripping some smaller stock.
Kent E on Dec 30, 2017
to use with longer cuts
Clifford L. J on Dec 30, 2017
This product was recommended to me by a friend who raves about what a great product this is.
Dolin R on Dec 21, 2017
What is a finger worth? I used a friends and found it very useful and comfortable. I wanted one for myself and I like the safety aspect.
Mark S on Dec 9, 2017
It looks very handy for a table saw.
Thomas U on Dec 8, 2017
The youtube videos reviews about the safety and versability aspect of this tool
conrad l on Dec 7, 2017
Looked like a good product for use on the table saw, good safety devise to get my hand away from the blade, Looks to be nicer that using a push stick.
Jason H on Dec 6, 2017
I bought this as a gift to my brother who has already lost one finger (bulldozer accident, not woodworking!) and can't afford to lose another! Seriously, this will help him work with more confidence!
Robert S on Dec 6, 2017
Chosen be one of your loyal customers and will be given to him as a gift
Robin A on Nov 9, 2017
safety safety safety
Javier R on Nov 4, 2017
mainly to work with the Tapering jig but this should work better than the standard push sticks that I have.
Scott S on Oct 23, 2017
Howard S on Jan 12, 2019
Extremely useful - Very versatile - Excellent reviews on line
Jonathan D on Jan 1, 2019
One user says it slips on wood, does not grip securely. Is this typical?
A shopper on May 18, 2015
BEST ANSWER: I have not had any slipping problems. The Gripper also has a small hook on the end which helps hold it.
Is there a DVD that comes with it?
A shopper on Jul 25, 2015
BEST ANSWER: There is a very good DVD included. You may need to pause it a few times or watch it over again, but it does the job. Highly recommended Push Block System and alot safer to boot!!!!
Will it work with rockwell blade runner 2?
Rod B on Jan 10, 2019
BEST ANSWER: Only in a very limited fashion. It is intended for use on a table saw.