PSA - Pressure Sensitive Veneer - 24 Inch X 96 Inch

Our clean and simple "peel-and-stick" 1/64'' thick veneers are now available in convenient 24"x 96" sheets. The 96" lengths are ideal for tall cabinets and uppers. No messy contact cement need apply-simplycut the veneer to size with a scissors, peel off the backing and use a High Pressure J-Roller (#50014, sold separately) for the smoothest application possible. This flexible veneer comes in Ash, White Laminate, White Birch, White Oak, Cherry, Hickory, Maple, Mahogany, Red Oak and Walnut.

• Unfinished real wood (white matte is not real wood)
• Accepts stains and finishes (white matte does not accept stains)
• Permanently bonds to wood, glass, plastic and metal
• Not recommended for use on fir plywood

Refacing tips: First, apply veneer to the end panels. Once you're ready for the faceframes, start with the stiles (vertical members). Cut veneer slightly wider than stile (leaving an overlap), and line up edge with top of the stile. Peel off backing and press as you go. Trim off the excess veneer. Finish by using a High Pressure J-Roller for optimal adhesion. Repeat the procedure on the rails (horizontal members).

How to Flatten Self‑Adhesive Veneer Sheets:

Self‑adhesive veneer often arrives rolled tightly for shipping, which can give the material a temporary “memory.” This is completely normal. Once unboxed, the veneer simply needs time and the right conditions to relax and return to a flat state.
Why Veneer Needs Time to Relax: Because the sheets are stored in a small‑diameter roll—sometimes for several weeks—they naturally hold that curved shape when first opened. Allowing the veneer to acclimate helps it settle into the environment where it will be applied.

Recommended Flattening Process:

• Unroll the sheet carefully and place it on a clean, flat surface
• Lay it face‑down (veneer side down) to prevent any risk of surface damage
• Add light, even weight—such as boards, books, or other flat objects—to encourage the sheet to relax
• Let it acclimate for at least 24 hours, or longer. This gives the adhesive backing and veneer fibers time to release tension and flatten naturally. The best environment for this is a 65-75 degree location with moderate humidity. This allows the adhesive to loosen properly and help lay flat.