Rockler 2-1/2'' to 2-1/4'' Conversion Port
Connect your shop vacuum to benchtop tools like a band saw or chop saw or anything with a 2-1/2" OD dust port! The 2-1/2" ID fitting with rubber boot and included hose clamp seals tight on 2-1/2" ports like T- or Y-fittings on your dust collection system or a power tool dust port. The other side, a 2-1/4" ID fitting, quick-connects to the hose on your shop vacuum, making it easy to bring dust collection to every benchtop tool in your shop!
1 month ago
2 months ago
3 months ago
3 months ago
4 months ago
5 months ago
5 months ago
It’s a perfect fit for my Rikon bandsaw and disc belt sander.
6 months ago
11 months ago
Additionally, on occassion the plastic has come apart from the rubber when I had pulled the hose too hard. Easy to put back together, but if you want a more positive swivel connection, get the two parts.
I struggled with this type of connection, too. The rubber part of this #49887 conversion port will be a loose fit over the outside of a 2 1/2" port, and it may be time consuming to change the clamp if you want to move it. I think you will want part #31660, 2 1/2" swivel fitting, which you can permanently clamp into both ends of your hose with hose clamps either #39482 or #29509. I found that these connectors on my hose will nicely slip into 2 1/4" I.D. fittings such as my shop vac intake and a 2 1/2" port or elbow from a stationary tool.
Hope this helps.
I can tell you the measurements of this adapter, which worked great for my Craftsman Sanding Table, but you'll have to check the exact measurements of your planer port and vacuum hose to see if they will fit. The Conversion Port's rubber flange with the hose clamp has a 2 1/2" inside diameter, so you'd want a 2 1/2" O.D. outlet from your planer. The hard plastic end of the Rockler adapter (which nicely swivels freely, by the way) has a 2 1/4" I.D., so your vacuum hose end should be 2 1/4" O.D.
My shop vac hose was too narrow, so I used Rockler's 2 1/2" Dust Hose #56647 with a 2.5" coupling # 36973. I hope this helps !
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
- Dust Right® 4'' to 2-1/4'' Shop Vacuum Tool Port AdapterSAVE $2.25 (15%) Special Price $12.74 $14.99
- 4" Elbow Dust Collection FittingSAVE $1.50 (15%) Special Price $8.49 $9.99
- 4'' T-Connector Dust Collection FittingsSAVE $1.50 (15%) Special Price $8.49 $9.99
- 4'' Dia. Dust Collection Splice ConnectorSAVE $1.20 (15%) Special Price $6.79 $7.99
- 4" Y-Connector Dust FittingSAVE $1.50 (15%) Special Price $8.49 $9.99