Store Locator
$17.99 Each
In stock

Get Expert Advice

Return Policy

Rockler 2-1/4'' Fence Flip Stop

Ideal for fences with top-mounted tracks.
Item #
82% of 100

Attaches to standard and universal T-tracks on 2-1/4" fences with included 5/16" T-bolt and knob. Ideal for fences with top-mounted tracks. Set the stop at your desired measurement to create a square end for repeatable cuts and other tasks.

Notice: Does not work with Kreg tracks.
(1) Rockler 2-1/4'' Fence Flip Stop
More Information
Brand Rockler
Manufacturer Part Number TACCS-SFS
Weight 0.3500
4.1 / 5.0
56 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Solid piece of metal
This fence flip stop is very well made. Solid. So much better than getting a stop say from another company made of plastic or abs. I have only used it for one time. Will be getting more to use on my miter station track I installed.
October 8, 2019
4 months ago
Woodworking Experience:
fence flip stop
Works awesome, very happy with it
September 10, 2019
5 months ago
Woodworking Experience:
Works like advertised
A little tough to move up and down but a touch of WD-40 makes it glide. Well worth the effort if you’re doing multiple pieces the same length or need a second set of hands to hold a piece in place
August 14, 2019
5 months ago
Woodworking Experience:
Works great.
August 14, 2019
6 months ago
Woodworking Experience:
Rocker 2 - 1/4 " fence flip stop
A very good product as well as price. A+++++
June 22, 2019
over 2 years ago
Woodworking Experience:
Exactly what I wanted
June 2, 2019
8 months ago
This flip stop was a great buy at a reasonable price. Works perfectly with my miter saw setup.
April 27, 2019
9 months ago
Woodworking Experience:
This is a great work stop for the miter saw.
April 26, 2019
9 months ago
Totally Works
All moving parts are adjustable without hindering performance. I can make the arm stiffer or more nimble as needed. It even works well on my 8" fence
April 12, 2019
10 months ago
It worked
I was concerned that I could set the position and it would hold. It seemed to hold and all the boards are the same lenght.
January 31, 2019
1 year ago
Woodworking Experience:
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 14 questions Browse 14 questions and 81 answers
Why did you choose this?
Rockler Store
Building a router table
Gary C on Jan 13, 2020
I needed it for table saw sled
James M on Jan 6, 2020
Building a router table
Gary C on Jan 13, 2020
Good for repetitious cuts
Jeffrey C on Jan 7, 2020
I needed it for table saw sled
James M on Jan 6, 2020
Mitre saw station
Terry M on Jan 5, 2020
needed for cross cut sled
alan L on Jan 4, 2020
new item, trying to make an easier stop for my miter saw
THOMAS A on Jan 4, 2020
I plan on adding these to my drill press fence.
Robert M on Dec 13, 2019
Making a new miter saw station.
1st Maker S on Dec 5, 2019
Setting up new miter saw station
John A on Dec 2, 2019
I use my router table to make a lot of repetitive cuts on the underside of stock with vee-bits. The flip-stops are invaluable.
R.A. K on Nov 15, 2019
I already have this product and am replicating a second miter saw station. Great product!
David S on Nov 13, 2019
It was a gift, my son picked it out
Patricia B on Nov 11, 2019
Building a cross-cut sled
Terry K on Nov 1, 2019
I plan on using it with my ordered small parts sled.
Richard K on Nov 1, 2019
need it
timothy l on Oct 31, 2019
Tired of clamping scrap blocks of wood to my fence as stops.
David O on Oct 23, 2019
Wanted a flip stop that will work on my fence so that I can have my chuck lower to the table.....
LESLIE L on Oct 20, 2019
Rockler makes really good devices with great prices. This will work beautifully with my new miter saw precision measuring fence system. I was able to get lots more distance for lots less money as compared to the Kreg Precision measuring system kit.
Timothy B on Sep 7, 2019
Looks like the perfect complement to the Rockler small parts crosscut sled that I purchased this with.
Thomas M on Sep 3, 2019
Saw this item used on a table saw sled in a Rockler class I took and I want to duplicate the sled and I want to
LBN on Aug 30, 2019
This will be used with my T-Track Fence Cap
Daniel K on Aug 27, 2019
Installing one on each side of my drill press fence
Brad Z on Aug 23, 2019
Stop block for new chop saw work station
Rick M on Aug 22, 2019
Building a table saw sled
Frank P on Aug 12, 2019
I want to build a cross cut sled with a stop block
Robert S on Jul 25, 2019
for more accurate results
bennie m on Jul 19, 2019
Building fence for miter saw extension.
Rod B on Jul 19, 2019
Consistency in production
Patrick B on Jul 17, 2019
drill press upgrade
John G on Jul 16, 2019
Have these on a table saw sled and the stops work well. Putting this pair on the drill press table fence.
William H on Jul 4, 2019
Building a crosscut sled
James C on Jun 11, 2019
to use with drill press jig for cam connectors
jose c on May 14, 2019
To replicate cuts without clamping boards to the miter saw fence.
Stephanie Salem - P on May 6, 2019
To use with a new table saw sled.
Randy J on Apr 8, 2019
Will use on miter saw and drill press.
Sharpwood on Apr 5, 2019
Will use on my miter saw station for repetitive cuts.
Don S on Mar 30, 2019
to use with the fence i am making for my router
Anthony L on Mar 17, 2019
I needed a stop that could be used at the drill press ,router table and miter saw.
Richard M on Mar 15, 2019
Building a table saw cross cut sled.
Sam M on Feb 25, 2019
Building cross cut sled and need this for the top.
Craig T on Feb 25, 2019
For repeated cuts
Steve R on Feb 24, 2019
Goes well with the t-track
Stephen H on Feb 12, 2019
To make my fence more effective
Thomas O on Feb 12, 2019
Needed a good stop for my tablesaw sled. This will do the trick.
Victor A on Feb 11, 2019
I needed a stop-fence for the miter saw.
John H. on Feb 11, 2019
Building a fence for a new miter saw station.
David Young D on Feb 7, 2019
A must for repetitive cuts.
Tim C on Jan 30, 2019
Need it for mitre cabinet
Raymond P on Jan 10, 2019
This is going to be great for my new fence. I will be able to easily replicate my sizes.
Michael d on Jan 2, 2019
looking great
R U on Dec 24, 2018
Good for repetitious cuts
Jeffrey C on Jan 7, 2020
Mitre saw station
Terry M on Jan 5, 2020
Is there a shorter flip stop out there? I have an older model Incra drill press table. The fence is less than 2 inches tall. I got a couple of Woodpecker flip stops, but the aren't long enough to contact the table when flipped down.
Sawdustmaker on Apr 17, 2016
BEST ANSWER: I do recall that there is smaller version of this stop. It's aluminum and so could be shortened easily.
Will this stop work on the Kreg Top Trak system? Im looking for a good option for a flip stop steup on my drill press table. My drill press fence already has the Kreg Top Trak on it. I know you can use the Kreg Flip stops for this. I am looking for a cheaper/smaller sized flip stop to use with my drill press table.
prowoodman on Jun 6, 2015
Rockler 2-1/4'' Fence Flip Stop
Rockler 2-1/4'' Fence Flip Stop
Kreg 48'' Top Trak Fence
Kreg 48'' Top Trak Fence
BEST ANSWER: No - the Kreg top track has a slightly smaller slot than the Rockler t-track, so the notch that sits down in the track is a bit too small. I'd just spring for the Kreg flip stop.
Will this stop work on the Osborne EB-3 miter gauge?
Mr Bill on Jun 11, 2015
BEST ANSWER: Hi Bill. I have an EB-3 miter guage and the flip stop will not work on it. If you do want to use it you have to change the knob and bolt to fit the track and use a sacrificial fence (something I do not use with this miter guage). Hope this helps.
Is it possible for two flip stops to slide past each other on the T-track fence cap if they are on separate tracks?
Bert S on Apr 10, 2019
Rockler 2-1/4'' Fence Flip Stop
Rockler 2-1/4'' Fence Flip Stop
Rockler Double T-Track Fence Cap
Rockler Double T-Track Fence Cap
BEST ANSWER: that would depend on how far apart the tracks are mounted
Will this work with the small parts sled?
Rwar407 on Sep 8, 2019
BEST ANSWER: Yes it will. I bought the Flip stop and used it. Keep in mind though, if you have that clear plastic to protect from the blade, that thing gets in the way of the fence stop. It would only matter if you had to make such a small cut and want to have the fence flip stop that close to the piece. Not sure if I explained that properly.
I am making a new cross cut sled for my tablesaw, and would like to have an adjustable stop built into the forward fence. What parts would I need to do this?
Craig W on Oct 13, 2018
BEST ANSWER: You will need a t-track on the top of the fence. Rockler has simple t-track available OR you can install a "double t-track fence cap" which can hold a t-track tape measure. Check out both options - the double t-track is a great setup.
My track is on top of my fence instead of behind it will this still work good?
Charlie T on Feb 25, 2017
BEST ANSWER: If I understand your question correctly, the answer is YES, the flip stop will work with the T-track on top of the fence as well as on the face of the fence. I have fences with track on the face of the fence as well as on top and I use the flip stop equally well in both applications. The picture in the catalog shows the flip stop in use with a top mounted track.
Will this system work on an Ayen track system?
A shopper on Aug 20, 2015
BEST ANSWER: I don't know. I ended up returning them and purchasing the Kreg stops. If I remember correctly, I needed a right and left with the leg on the leading edge. The Rockler version may not be reversible.
How do I install the hairline adapter on the flip stop? And how do you use it. Thanks
Gary A on Jan 8, 2020
BEST ANSWER: Gary, I measured a board to a specific length, 24” in my case, lined it up on my miter saw, clamped it in place, and cut it. I then moved the stop to meet the edge of the board and aligned the tape measure and the hairline marker. I’m accurate to a 1/32” using this method.
I have a 2 1/2 in tall shop made fence with a t-slot on top. I would like do know what the setback for these is. (distance from fence face to center of track)?
Thomas L on Nov 4, 2019
BEST ANSWER: From the center of T track to the face of the fence is 1-1/8” to 1-1/4”. If you set a piece of T track up against the backside of a 3/4” fence, the stop will work perfectly.
does rockler make a opposite faceing flip down piece (right and left) I need this for my application?
Charles H on Apr 3, 2017
BEST ANSWER: I have not seen one. I tried reversing mine and you cannot do it with the factory screw. There is not a recessed part on the reverse side, so you would need a longer screw to move the fence to the other side.
I cut mostly 2x4, 2x6, and this stop sturdy enough to take some light impact without breaking?
kbctruss on Nov 30, 2015
BEST ANSWER: I have used my flip stop when working with 2x4 stock but have not had opportunity to use it with any 2x6 or 2x8 stock. It worked fine with the 2x4s. I guess the key is whether your definition of "light impact" and mine are similar when considering whether the stop will stand up without breaking. I experienced light impact against my stop when working with the 2x4s and the stop was solid. Based on that I don't see any reason why it would not be the same for 2x6 and 2x8 stock . . . assuming of course that the impact force is indeed "light".
Has anyone added plexi-glass to this stop block in order to make an accurate tape measure reading? If so,how did you attach the plexi to the stop block. thank you
Dominick G on May 24, 2018
BEST ANSWER: I glued the plexi to the fence, cut the plexi down, and moved the T-Track the distance of the plexi to attach the T-Track om one of my sleds. One of my sleds, I routed a dado cut in front of the fence the thickness of my measuring tape, then attached the tape ruler.
Prop 65 WarningWARNING: Cancer & Reproductive Harm -

More Suggestions