In stock
A fun turning kit that maintains the humidity for maximum cigar freshness and flavor.
Grouped product items
Product Name Price Qty
Rockler Cigar Humidor Turning Kit
Rockler Cigar Humidor Turning Kit Item #: 52103
In stock
Bushing Set for Cigar Humidor Turning Kit
Bushing Set for Cigar Humidor Turning Kit Item #: 57951
In stock

Rockler Cigar Humidor Turning Kit

Item #
Rockler Cigar Humidor Turning Kit:

Our tubular cigar humidor maintains your favorite cigar at the correct humidity for optimum freshness, flavor and shelf life. It also makes an elegant presentation case for a gift, a guest, or for that special occasion. It uses distilled water or humidifier solution to maintain 70% humidity, similar to that in which the tobacco grew. Pair it with the turning blank of your choice, bore the hole with a 1-1/16'' Forstner bit and turn it on your lathe.


  • Tube humidor comes complete with a hygrometer that displays current humidity
  • Uses distilled water or humidifier solution to maintain 70% humidity
  • Sturdy aluminum construction with black finish
  • Can accommodate a 7'' Classic Churchill cigar with 47 ring gauge

Bushing Set for Cigar Humidor Turning Kit:

These humidor bushings are precisely machined to match the diameter of your cigar humidor, allowing you to achieve smooth, perfectly flush seams. Simply turn your blanks to match the bushing diameters, leaving a bit of extra material to allow for sanding.


  • Designed to work with the Rockler Cigar Humidor Turning Kit (#52103, sold separately)
  • Made of a tough, durable polymer
  • Soft enough to prevent damage to your turning tools
(1) Cigar Humidor Turning Kit or (1) Bushing Set for Cigar Humidor Turning Kit
More Information
Brand Rockler
Tech Spec Rockler Cigar Humidor Turning Kit:
  • Required Drill Bit Diameter: 1-1/16'' (#50510, sold separately; also requires Extension #32937)
  • Humidifier Solution: Distilled water or Propylene Glycol Solution for Cigar Humidifiers
  • Maximum Cigar Ring Gauge: 50
  • Maximum Cigar Diameter: 19.8mm or ~25/32''
  • Inside Diameter: 0.89'' (22.5mm)
  • Length of Tube: 7.25'' (185mm)
  • Recommended Turning Blank Size: 2'' x 2'' x 6''

Bushing Set for Cigar Humidor Turning Kit:
  • Material: Polymer
  • Compatible Turning Kit: #52103
Technical Documents Rockler Cigar Humidor Turning Kit Instructions
Prop 65 WarningWARNING: Cancer & Reproductive Harm -

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to
3.0 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 8 questions Browse 8 questions and 4 answers
Listing says 47 ring gauge, but you're showing .89" inside diameter which is about 57 ring gauge. Which is accurate?
Mike W on Dec 20, 2018
Should I be concerned about the type of finish to use? For offgasing reasons?
Cole D on Dec 29, 2018
What stops the water from spilling if humidor is laid on its side or placed in a pocket?
Christopher T on Jan 23, 2019
BEST ANSWER: The last page of the instructions discuss the hydration process. There's a foam disc that you wet. Excess fluid should be absorbed with a paper towel.
Is anyone else having a problem with the green bushings fitting into the tubes? This is my third kit and I had a hard time getting the bushings into the tubes. I called Rockler and they sent me another tube and the bushings fit perfectly. Just got another set today and once again the bushings don't fit. I have to force them in and use pliers to get them out.
Bryce P on May 30, 2019
BEST ANSWER: The bushings are designed to fit snuggly. If they are too tightly you can place them on your mandrel and use a piece of fine grit sandpaper to reduce the diameter slightly.
What is recommended for the adhesive to use to glue tube in wood blank?
Larry on Feb 16, 2019
BEST ANSWER: I used two part epoxy and let it sit for a day to set up
My pen mandrel does not go all the way through the tubes and bushings. The threaded end of the rod is flush with the end of the bushing. Am I missing something?
Bryce P on Feb 2, 2019
BEST ANSWER: its a long kit, you may have to turn the top and bottom separate,
Any suggestions on getting the Hygrometer to go higher? Highest reading for me has been 45 to 50;
That has been both with the cigar in and out of the case. Optimal should be 65 - 70
Lee C on May 26, 2019
Is there an option to buy separate extra tubes?
Lee C on Apr 12, 2019
More Suggestions