Magnetic Touch Latches are the ideal solution when you want the clean, seamless look of no knobs. Simply press the door and the spring-loaded plunger pops it open for you. Press again, and the magnetic catch holds it closed. Combines the functions of a knob and catch in one inexpensive package. Easy surface-mounted installation mounts anywhere. The Magnetic Touch Latch is available in several colors to match your cabinetry.
(1) Single Door Magnetic Touch Latch
(1) Strike Plate
(1) Package of screws
(1) Strike Plate
(1) Package of screws
| Weight | 0.1000 |
|---|---|
| Tech Spec |
|
| Hardware Type | Latches |
4.3 / 5.0
28 Reviews
The product net all my expectations that was hoping for.
This latch arrived in a timely manner which I installed right away. It works fine.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
worked great. will definitely use again.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
The product was exactly what we needed and works perfectly
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Worked Perfect.
Simple and straight forward and worked perfect on my project. Very smooth action and I was surprised how strong the magnet holds to the door.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Easy to use / install / adjust. Work fine, happy with them so far. Time will tell how well they hold up but they are working fine for me right now.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Works very well
Easy to install. Just need to make sure you have some play allowing you to push the door/drawer front in about 1/16" to activate the mechanism. No complaints.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
I was very happy with how these worked.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Great product
Works well for medicine cabinet latches.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Single door magnetic touch latch
I used them before and worked well
I didn't need the last ones I purchased. will keep them in stock for another time
I didn't need the last ones I purchased. will keep them in stock for another time
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 11 questions
Browse 11 questions
and 17 answers
Why did you choose this?
Rockler Store
it will work for my simple gate
Jeffrey A
on Aug 15, 2018
Replace failed latch
Wendell S
on Jul 3, 2018
it will work for my simple gate
Jeffrey A
on Aug 15, 2018
Replacement parts
Tony M
on Aug 8, 2018
Replacement parts
Tony M
on Aug 8, 2018
NEEDED THIS FOR A PROJECT
GREGORY P. M
on Jun 25, 2018
Can this be used on a regular bathroom door?
BEST ANSWER: It depends on what you mean by "regular" door.? If you have an inset door, then yes you can as the latch needs to be able to be depressed inward to release the mechanism. But if you have an overlay door Rockler's sells a barrel type magnetic latch/catch that would be better suited for your application. As a side note, you asked about a bathroom door? These are for cabinets and not entry doors, if that is what your question was about.
- Reply
- Inaccurate
- Ron B. on May 27, 2015
- Purchased on Apr 13, 2015
Can this latch be mounted with doiuble stick tape?
what is pull force of this magnetic touch latch 28381?
can they be used on drawers ?
BEST ANSWER: These are not designed to be used on drawers nor do they have any instructions showing how to do so. I am a woodworker and engineer and I can imagine how the latch might be used on a drawer. However, self-closing drawer slides accomplish pretty much the same thing and do not require that the drawer be pushed a quarter inch or so inwards in order to be opened. You may be clever enough to figure out how to make it work, but your success depends on the size, weight, and physical arrangement of the drawer and supporting cabinet.
- Reply
- Inaccurate
- Jeff M on Nov 28, 2017
- Purchased on Dec 9, 2015
How strong is the magnet and will it stay shut in an earthquake ?
BEST ANSWER: It is strong enough to hold the 1/4" glass panel but I would say that it's no different then any other cabinet magnet and therefore would say that no it wouldn't hold back any object with weight in an earthquake.
- Reply
- Inaccurate
- Douglas T on Feb 12, 2019
- Purchased on Mar 1, 2017
How far does the latch travel inward to release the plunger? I'd like to use this latch on frameless shop cabinets with full overlay doors. I'm using no-mortise hinges that will hold the hinge edge of the doors about 1/16 out from the cabinet boxes. Thanks!
BEST ANSWER: Hi Rob, I used these on a cabinet door 16"x16". But the door sits even with the face frame. I only need to push the door in about a 1/16" to release it, but you will need a pretty good push to lock the plunger past the internal lock of the latch. At least 3/16- 1/4" so if I understand your question correctly, this catch may not be for your particular need. A good stationary magnet may be your answer but you will need to use a door handle. The reason I used these is that I didn't want to use a door handle. Hope this helps!
- Reply(1)
- Inaccurate
- Ron B. on Jun 8, 2016
- Purchased on Apr 13, 2015
can this latch be used on an inset cabinet door?
BEST ANSWER: If your cabinet is non-face-frame this would work on an inset door. If your cabinet is face-frame then there would have to be some blocking added to mount this latch for an inset door, but either way it will work.
- Reply
- Inaccurate
- Donald P on Jul 12, 2015
- Purchased on Apr 3, 2015
I have the single magnetic touch catch. Do I mount it with the spring latch in or out?
BEST ANSWER: You will want to have it in. This way you can line up the door with the cabinet easier.
- Reply
- Inaccurate
- Rick H Staff on May 11, 2018
This sounds like exactly what I want, but I'm concerned about the size of my cabinet doors. They are 15" wide and 49" long. What do you think?
BEST ANSWER: I used this on a 48” x 24” glass door and it worked just fine.
- Reply
- Inaccurate
- Roy H on Aug 28, 2019
- Purchased on Mar 7, 2016
What is the depth of the part with the magnetic piece pushed in?
Will a magnetic latch work with soft close hinges?
BEST ANSWER: It's not really designed for that because it uses a spring to "pop" the door open for you. if you need extra holding power to keep something closed for some reason a regular door magnet would probably work better.
- Reply
- Inaccurate
- Larry H on Jul 29, 2015
- Purchased on Apr 26, 2015
WARNING: Cancer & Reproductive Harm -
Related Products
